On Wed, 2020-04-29 at 08:18 +0200, Marek Szyprowski wrote: > Hi Nicolas, > > On 28.04.2020 19:44, Nicolas Saenz Julienne wrote: > > When needed, RPi4's co-processor (called VideoCore) has to be instructed > > to load VL805's firmware (the chip providing xHCI support). VideCore's > > firmware expects the board's PCIe bus to be already configured in order > > for it to load the xHCI chip firmware. So we have to make sure this > > happens in between the PCIe configuration and xHCI startup. > > > > Signed-off-by: Nicolas Saenz Julienne <[email protected]> > > --- > > drivers/usb/host/xhci-pci.c | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c > > index c1f60da541..5c17ea6932 100644 > > --- a/drivers/usb/host/xhci-pci.c > > +++ b/drivers/usb/host/xhci-pci.c > > @@ -11,6 +11,8 @@ > > #include <usb.h> > > #include <usb/xhci.h> > > > > +#include <asm/arch/msg.h> > > + > > Does the above include works on the other archs?
It doesn't I should have enclosed it with '#ifdef CONFIG_BCM2711' as well. Regards, Nicolas
signature.asc
Description: This is a digitally signed message part
