Hi Jakov,

On 23.05.20 20:23, Jakov Petrina wrote:
On 12/05/2020 12:02, Jakov Petrina wrote:
Commit f49ac7e1c4 switched the default PHY speed to 3.125Gbit to resolve
issues with SFP modules. However, U-Boot does not have a "2500base-x"
phy-mode.

Resolve this by using "sgmii-2500" instead.

Signed-off-by: Jakov Petrina <jakov.petr...@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir....@sartura.hr>
Cc: Luka Perkov <luka.per...@sartura.hr>
Cc: Stefan Roese <s...@denx.de>
---
  arch/arm/dts/armada-3720-uDPU.dts | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)


Hi Stefan,

I'm curious if there are any feedback or blockers on this patch?

Sorry for the delay. I'll take care of it shortly.

Thanks,
Stefan


Thanks,
Jakov

diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 07c7b91175..7f4b8222f4 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -125,14 +125,14 @@
  &eth0 {
      pinctrl-0 = <&pcie_pins>;
      status = "okay";
-    phy-mode = "2500base-x";
+    phy-mode = "sgmii-2500";
      managed = "in-band-status";
      phy = <&ethphy0>;
  };
  &eth1 {
      status = "okay";
-    phy-mode = "2500base-x";
+    phy-mode = "sgmii-2500";
      managed = "in-band-status";
      phy = <&ethphy1>;
  };





Viele Grüße,
Stefan

--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de

Reply via email to