From: Heiko Stuebner <[email protected]> The regulator enable-gpio uses opposite values for the declaration vs. the enable_active_low property, breaking the regulator enablement.
Make the usbhost-supply work again by bringing them in sync again. This mimics the upstream Linux change found on: http://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]> --- arch/arm/dts/rk3399-puma.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 531520e771..72c06abd27 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -101,7 +101,7 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; -- 2.26.2
