Move the default eMMC boot partition index used for SPL load to a weak
function. So we can override it in iMX8 specified codes.
Because on iMX8 when the emmc regular boot is from boot part0/1, ROM will
switch to the other boot part for secondary boot. So we can't directly
use the boot part index in PARTITION_CONFIG register, but have
to check the secondary boot for using correct boot partition.

Signed-off-by: Ye Li <ye...@nxp.com>
Reviewed-by: Peng Fan <peng....@nxp.com>
---
 common/spl/spl_mmc.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index add2785..f2880cc 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -324,6 +324,27 @@ unsigned long __weak spl_mmc_get_uboot_raw_sector(struct 
mmc *mmc,
        return raw_sect;
 }
 
+int __weak spl_mmc_emmc_boot_partition(struct mmc *mmc)
+{
+       int part = 0;
+
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
+       part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
+#else
+       /*
+        * We need to check what the partition is configured to.
+        * 1 and 2 match up to boot0 / boot1 and 7 is user data
+        * which is the first physical partition (0).
+        */
+       part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
+
+       if (part == 7)
+               part = 0;
+#endif
+
+       return part;
+}
+
 int spl_mmc_load(struct spl_image_info *spl_image,
                 struct spl_boot_device *bootdev,
                 const char *filename,
@@ -355,19 +376,7 @@ int spl_mmc_load(struct spl_image_info *spl_image,
        err = -EINVAL;
        switch (boot_mode) {
        case MMCSD_MODE_EMMCBOOT:
-#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
-               part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
-#else
-               /*
-                * We need to check what the partition is configured to.
-                * 1 and 2 match up to boot0 / boot1 and 7 is user data
-                * which is the first physical partition (0).
-                */
-               part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
-
-               if (part == 7)
-                       part = 0;
-#endif
+               part = spl_mmc_emmc_boot_partition(mmc);
 
                if (CONFIG_IS_ENABLED(MMC_TINY))
                        err = mmc_switch_part(mmc, part);
-- 
2.7.4

Reply via email to