Hi Adam, Adam Ford <[email protected]> wrote on Thu, 11 Jun 2020 21:49:12 -0500:
> I am doing some spot checks on the da850evm which boots from SPI. It > seems OK, however, when I run the mtdparts, I expect to see the > partition map of the SPI flash. > > Unfortunately, I get the following error: > nor0: partition (SPL) size alignment incorrect > > Currently, it's setup as follows: > CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:32k(SPL),480k(u-boot),64k(u-boot-env),7552k(kernel-spare),64k(MAC-Address)" It's not very clear to me what the error might be but did you consider the fact that the block size could be 64k instead of 32k? > This used to work, but I was hoping someone might have an idea on what > I can do to address it. I haven't had a chance to bisect yet. If you're still testing with the same board, the above proposal is unlikely to fix your issue. Also, it might be worth adding traces in cmd/mtdparts.c to see whether it is the start (unlikely, would mean there is a serious issue here), or the end of the partition which is the culprit. Cheers, Miquèl
