On 23.06.20 13:50, Lokesh Vutla wrote:
On 23/06/20 4:45 pm, Jan Kiszka wrote:
From: Jan Kiszka <[email protected]>
To avoid the need of extra boot scripting on AM65x for loading a
watchdog firmware, add the required rproc init and loading logic for the
first R5F core to the watchdog start handler. The firmware itself is
embedded into U-Boot binary.
One possible firmware source is https://github.com/siemens/k3-rti-wdt.
Signed-off-by: Jan Kiszka <[email protected]>
---
drivers/watchdog/Kconfig | 20 ++++++++++++++++++++
drivers/watchdog/Makefile | 3 +++
drivers/watchdog/rti_wdt.c | 24 ++++++++++++++++++++++++
drivers/watchdog/rti_wdt_fw.S | 20 ++++++++++++++++++++
4 files changed, 67 insertions(+)
create mode 100644 drivers/watchdog/rti_wdt_fw.S
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ee99bd2af1..fd6ab9a85b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -162,6 +162,26 @@ config WDT_K3_RTI
Say Y here if you want to include support for the K3 watchdog
timer (RTI module) available in the K3 generation of processors.
+if WDT_K3_RTI
+
+config WDT_K3_RTI_LOAD_FW
+ bool "Load watchdog firmware"
+ depends on REMOTEPROC
+ help
+ Automatically load the specified firmware image into the MCU R5F
+ core 0. On the AM65x, this firmware is supposed to handle the expiry
+ of the watchdog timer, typically by resetting the system.
+
+config WDT_K3_RTI_FW_FILE
+ string "Watchdog firmware image file"
+ default "k3-rti-wdt.fw"
+ depends on WDT_K3_RTI_LOAD_FW
+ help
+ Firmware image to be embedded into U-Boot and loaded on watchdog
+ start.
+
+endif
+
config WDT_SANDBOX
bool "Enable Watchdog Timer support for Sandbox"
depends on SANDBOX && WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 16bdbf4970..bf58684875 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -28,7 +28,10 @@ obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
obj-$(CONFIG_WDT_K3_RTI) += rti_wdt.o
+obj-$(CONFIG_WDT_K3_RTI_LOAD_FW) += rti_wdt_fw.o
obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
obj-$(CONFIG_WDT_XILINX) += xilinx_wwdt.o
+
+$(obj)/rti_wdt_fw.o: $(shell readlink -f $(CONFIG_WDT_K3_RTI_FW_FILE)) FORCE
diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index ebe29c7409..38e82a6b6b 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -14,6 +14,7 @@
#include <power-domain.h>
#include <wdt.h>
#include <asm/io.h>
+#include <remoteproc.h>
/* Timer register set definition */
#define RTIDWDCTRL 0x90
@@ -37,11 +38,16 @@
#define WDT_PRELOAD_MAX 0xfff
+#define RTI_PROC_ID 0
Can we get the rproc id from DT?
You mean, resolve "mcu_r5fss0_core0" to the ID? Doable.
+
struct rti_wdt_priv {
phys_addr_t regs;
unsigned int clk_khz;
};
+extern const u32 rti_wdt_fw[];
+extern const int rti_wdt_fw_size;
FIT is the preferred way of packing images in U-Boot. Can you try using it?
How does that work? Some example for me?
What benefit would that bring? There are other users of this pattern,
e.g. board/xilinx/zynqmp/pm_cfg_obj.S.
Jan
--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux
