Disable USB support for now. There is non-trivial work required to fully move the OMAP3 platforms to DM. While this work is in-progress, disable USB support for now as we've gone well past the migration deadline.
Cc: Adam Ford <aford...@gmail.com> Signed-off-by: Tom Rini <tr...@konsulko.com> --- configs/omap3_beagle_defconfig | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index ed7cb8f2ff63..236a4f4f5f5a 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_SPL=y CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="usb start" @@ -31,7 +32,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FS_UUID=y @@ -50,8 +50,6 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y CONFIG_LED_STATUS_BIT=1 @@ -73,24 +71,10 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_SPL_NAND_SIMPLE=y +CONFIG_DM_ETH=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OMAP3=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_OMAP2PLUS=y -CONFIG_TWL4030_USB=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="TI" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_USB_ETHER_MCS7830=y -CONFIG_USB_ETHER_SMSC95XX=y CONFIG_VIDEO_OMAP3=y CONFIG_FAT_WRITE=y CONFIG_BCH=y -- 2.17.1
