Fixed delay 200us is not working in certain platforms. Change to poll for reset completion status to have more reliable reset process.
Controller will set the rst_comp bit in intr_status register after controller has completed its reset and initialization process. Tested-by: Masahiro Yamada <[email protected]> Signed-off-by: Radu Bacrau <[email protected]> Signed-off-by: Ley Foon Tan <[email protected]> --- v2: - Added "Tested-by" in commit message. - Restore "bootstrap process" in comment. --- drivers/mtd/nand/raw/denali.c | 11 +++++++++++ drivers/mtd/nand/raw/denali.h | 1 + drivers/mtd/nand/raw/denali_dt.c | 11 ++++++++--- 3 files changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index 15e90291de09..ab91db85467d 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -1220,6 +1220,17 @@ static int denali_multidev_fixup(struct denali_nand_info *denali) return 0; } +int denali_wait_reset_complete(struct denali_nand_info *denali) +{ + u32 irq_status; + + irq_status = denali_wait_for_irq(denali, INTR__RST_COMP); + if (!(irq_status & INTR__RST_COMP)) + return -EIO; + + return 0; +} + int denali_init(struct denali_nand_info *denali) { struct nand_chip *chip = &denali->nand; diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h index 019deda094e5..6cd02b2e26ee 100644 --- a/drivers/mtd/nand/raw/denali.h +++ b/drivers/mtd/nand/raw/denali.h @@ -321,6 +321,7 @@ struct denali_nand_info { #define DENALI_CAP_DMA_64BIT BIT(1) int denali_calc_ecc_bytes(int step_size, int strength); +int denali_wait_reset_complete(struct denali_nand_info *denali); int denali_init(struct denali_nand_info *denali); #endif /* __DENALI_H__ */ diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index 75ad15b0758c..c22b05940df6 100644 --- a/drivers/mtd/nand/raw/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c @@ -154,10 +154,15 @@ static int denali_dt_probe(struct udevice *dev) /* * When the reset is deasserted, the initialization sequence is - * kicked (bootstrap process). The driver must wait until it is - * finished. Otherwise, it will result in unpredictable behavior. + * kicked (bootstrap proccess). The driver must wait until it + * is finished. Otherwise, it will result in unpredictable + * behavior. */ - udelay(200); + ret = denali_wait_reset_complete(denali); + if (ret) { + dev_err(denali->dev, "reset not completed.\n"); + return ret; + } } return denali_init(denali); -- 2.19.0
