On Wed, Jul 8, 2020 at 7:11 PM Wolfgang Wallner
<wolfgang.wall...@br-automation.com> wrote:
>
> Hi Simon,
>
> -----"Simon Glass" <s...@chromium.org> schrieb: -----
> > Betreff: [PATCH v2 28/44] i2c: designware_i2c: Support ACPI table generation
> >
> > Update the PCI driver to generate ACPI information so that Linux has the
> > full information about each I2C bus.
> >
> > Signed-off-by: Simon Glass <s...@chromium.org>
> >
> > Reviewed-by: Heiko Schocher <h...@denx.de>
> > ---
> >
> > Changes in v2:
> > - Add a few blank lines
> > - Drop dead code behind if (0)
> >
> > Changes in v1:
> > - Capitalise ACPI_OPS_PTR
> >
> > drivers/i2c/designware_i2c.c | 26 +++++++++
> > drivers/i2c/designware_i2c.h | 15 +++++
> > drivers/i2c/designware_i2c_pci.c | 96 +++++++++++++++++++++++++++++++-
> > 3 files changed, 136 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c
> > index 44a1f33398..cf892c69d9 100644
> > --- a/drivers/i2c/designware_i2c.c
> > +++ b/drivers/i2c/designware_i2c.c
> > @@ -333,6 +333,32 @@ static int _dw_i2c_set_bus_speed(struct dw_i2c *priv,
> > struct i2c_regs *i2c_base,
> > /* Restore back i2c now speed set */
> > if (ena == IC_ENABLE_0B)
> > dw_i2c_enable(i2c_base, true);
> > + if (priv)
> > + priv->config = config;
> > +
> > + return 0;
> > +}
> > +
> > +int dw_i2c_gen_speed_config(const struct udevice *dev, int speed_hz,
> > + struct dw_i2c_speed_config *config)
> > +{
> > + struct dw_i2c *priv = dev_get_priv(dev);
> > + ulong rate;
> > + int ret;
> > +
> > +#if CONFIG_IS_ENABLED(CLK)
> > + rate = clk_get_rate(&priv->clk);
> > + if (IS_ERR_VALUE(rate))
> > + return log_msg_ret("clk", -EINVAL);
> > +#else
> > + rate = IC_CLK;
> > +#endif
> > +
> > + ret = calc_bus_speed(priv, priv->regs, speed_hz, rate, config);
> > + if (ret)
> > + printf("%s: ret=%d\n", __func__, ret);
> > + if (ret)
> > + return log_msg_ret("calc_bus_speed", ret);
> >
> > return 0;
> > }
> > diff --git a/drivers/i2c/designware_i2c.h b/drivers/i2c/designware_i2c.h
> > index dc9a6ccb63..d87a3bff93 100644
> > --- a/drivers/i2c/designware_i2c.h
> > +++ b/drivers/i2c/designware_i2c.h
> > @@ -205,6 +205,7 @@ struct dw_i2c {
> > #if CONFIG_IS_ENABLED(CLK)
> > struct clk clk;
> > #endif
> > + struct dw_i2c_speed_config config;
> > };
> >
> > extern const struct dm_i2c_ops designware_i2c_ops;
> > @@ -213,4 +214,18 @@ int designware_i2c_probe(struct udevice *bus);
> > int designware_i2c_remove(struct udevice *dev);
> > int designware_i2c_ofdata_to_platdata(struct udevice *bus);
> >
> > +/**
> > + * dw_i2c_gen_speed_config() - Calculate config info from requested speed1
>
> Nit: is "speed1" a typo?
I think so. Will fix it when applying.
>
> > + *
> > + * Calculate the speed config from the given @speed_hz and return it so
> > that
> > + * it can be incorporated in ACPI tables
> > + *
> > + * @dev: I2C bus to check
> > + * @speed_hz: Requested speed in Hz
> > + * @config: Returns config to use for that speed
> > + * @return 0 if OK, -ve on error
> > + */
> > +int dw_i2c_gen_speed_config(const struct udevice *dev, int speed_hz,
> > + struct dw_i2c_speed_config *config);
> > +
> > #endif /* __DW_I2C_H_ */
> > diff --git a/drivers/i2c/designware_i2c_pci.c
> > b/drivers/i2c/designware_i2c_pci.c
> > index bd34ec0b47..d0d869c81a 100644
> > --- a/drivers/i2c/designware_i2c_pci.c
> > +++ b/drivers/i2c/designware_i2c_pci.c
> > @@ -9,7 +9,12 @@
> > #include <dm.h>
> > #include <log.h>
> > #include <spl.h>
> > +#include <acpi/acpigen.h>
> > +#include <acpi/acpi_device.h>
> > #include <asm/lpss.h>
> > +#include <dm/acpi.h>
> > +#include <dm/device-internal.h>
> > +#include <dm/uclass-internal.h>
> > #include "designware_i2c.h"
Regards,
Bin
