> From: Igor Opaniuk <igor.opan...@toradex.com> > This introduces support for EEPROM as a storage for the main Toradex > config block and additional config blocks on extra EEPROM chips (on > carrier board or video adapters). > To enable EEPROM as a storage for the main config block: > TDX_HAVE_EEPROM=y. > For additional EEPROMs please enable this Kconfig symbol: > TDX_CFG_BLOCK_EXTRA=y. > Information about existing EEPROM chips is provided via Device Tree > using aliases. > You can also write configuration for the carrier board using > create_carrier subcommand for cfgblock. Example: > Verdin iMX8MM # cfgblock create_carrier > Supported carrier boards: > UNKNOWN CARRIER = [0] > Verdin Carrier Board = [1] > Choose your carrier board (provide ID): 1 > Enter carrier board version (e.g. V1.1B): V1.0A > Enter carrier board serial number: 10622780 > Also with barcode: > Verdin iMX8MM # cfgblock create carrier -y 0156100010622780 > Signed-off-by: Igor Opaniuk <igor.opan...@toradex.com> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================