Hi Stefan,
> Patch 253cb831 [zlib: add watchdog reset call] added already a few
> watchdog reset calls to the new zlib U-Boot port. But on some boards
> this is not enough. Additional calls are needed on boards with
> short watchdog timeouts.
>
> This was detected and tested on the lwmon5 board with a very short
> watchdog timeout. Without this patch, the board resets during Linux
> kernel decompression. With it, the decompression succeeds.
>
> Signed-off-by: Stefan Roese <s...@denx.de>
> Cc: Detlev Zundel <d...@denx.de>
Acked-by: Detlev Zundel <d...@denx.de>
Cheers
Detlev
--
The 82558 B-step and later generation devices do not maintain a link
in D3 if PME is disabled or if the device does not have power.
-- Intel documentation
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
