From: Vladimir Olovyannikov <[email protected]> Extend Kconfig for the board with board-specific commands selection.
Signed-off-by: Vladimir Olovyannikov <[email protected]> Signed-off-by: Rayagonda Kokatanur <[email protected]> Reviewed-by: Simon Glass <[email protected]> --- board/broadcom/bcmns3/Kconfig | 7 +++++++ cmd/Makefile | 2 ++ 2 files changed, 9 insertions(+) diff --git a/board/broadcom/bcmns3/Kconfig b/board/broadcom/bcmns3/Kconfig index 8ce21f980d..cb73f98eae 100644 --- a/board/broadcom/bcmns3/Kconfig +++ b/board/broadcom/bcmns3/Kconfig @@ -12,4 +12,11 @@ config SYS_SOC config SYS_CONFIG_NAME default "bcm_ns3" +config CMD_BCM_EXT_UTILS + bool "Enable Broadcom-specific U-Boot commands" + default y + help + Enable Broadcom specific U-Boot commands such as error log setup + command or any other commands specific to NS3 platform. + endif diff --git a/cmd/Makefile b/cmd/Makefile index 3a9c9747c9..c7a08ed109 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -197,6 +197,8 @@ obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o # core command obj-y += nvedit.o +obj-$(CONFIG_CMD_BCM_EXT_UTILS) += broadcom/ + obj-$(CONFIG_TI_COMMON_CMD_OPTIONS) += ti/ filechk_data_gz = (echo "static const char data_gz[] ="; cat $< | scripts/bin2c; echo ";") -- 2.17.1
