This patch adds the glue layer for the MIPS Octeon SoCs. It's ported
mainly from the Linux code.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Bin Meng <bmeng...@gmail.com>
Cc: Marek Vasut <ma...@denx.de>
---
Changes in v3:
- Minor corrections of the commit text as suggested by Bin
- Minor corrections in comments as suggested by Bin
- Removed empty driver remove() function
- Use macros for clock values instead of numbers
drivers/usb/host/Kconfig | 9 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/dwc3-octeon-glue.c | 393 ++++++++++++++++++++++++++++
3 files changed, 403 insertions(+)
create mode 100644 drivers/usb/host/dwc3-octeon-glue.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1c374a7bd8..d71c12d888 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -46,6 +46,15 @@ config USB_XHCI_MVEBU
SoCs, which includes Armada8K, Armada3700 and other Armada
family SoCs.
+config USB_XHCI_OCTEON
+ bool "Support for Marvell Octeon family on-chip xHCI USB controller"
+ depends on ARCH_OCTEON
+ default y
+ help
+ Enables support for the on-chip xHCI controller on Marvell Octeon
+ family SoCs. This is a driver for the dwc3 to provide the glue logic
+ to configure the controller.
+
config USB_XHCI_PCI
bool "Support for PCI-based xHCI USB controller"
depends on DM_USB
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 29d4f87e38..a12e8f2702 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
obj-$(CONFIG_USB_XHCI_RCAR) += xhci-rcar.o
obj-$(CONFIG_USB_XHCI_STI) += dwc3-sti-glue.o
+obj-$(CONFIG_USB_XHCI_OCTEON) += dwc3-octeon-glue.o
# designware
obj-$(CONFIG_USB_DWC2) += dwc2.o
diff --git a/drivers/usb/host/dwc3-octeon-glue.c
b/drivers/usb/host/dwc3-octeon-glue.c
new file mode 100644
index 0000000000..39b3185616
--- /dev/null
+++ b/drivers/usb/host/dwc3-octeon-glue.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Octeon family DWC3 specific glue layer
+ *
+ * Copyright (C) 2020 Stefan Roese <s...@denx.de>
+ *
+ * The low-level init code is based on the Linux driver octeon-usb.c by
+ * David Daney <david.da...@cavium.com>, which is:
+ * Copyright (C) 2010-2017 Cavium Networks
+ */
+
+#include <dm.h>
+#include <errno.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <dm/lists.h>
+#include <dm/of_access.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/usb/dwc3.h>
+#include <linux/usb/otg.h>
+#include <mach/octeon-model.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CVMX_GPIO_BIT_CFGX(i) (0x0001070000000900ull + ((i) * 8))
+#define CVMX_GPIO_XBIT_CFGX(i) (0x0001070000000900ull + \
+ ((i) & 31) * 8 - 8 * 16)
+
+#define GPIO_BIT_CFG_TX_OE BIT_ULL(0)
+#define GPIO_BIT_CFG_OUTPUT_SEL GENMASK_ULL(20, 16)
+
+#define UCTL_CTL_UCTL_RST BIT_ULL(0)
+#define UCTL_CTL_UAHC_RST BIT_ULL(1)
+#define UCTL_CTL_UPHY_RST BIT_ULL(2)
+#define UCTL_CTL_DRD_MODE BIT_ULL(3)
+#define UCTL_CTL_SCLK_EN BIT_ULL(4)
+#define UCTL_CTL_HS_POWER_EN BIT_ULL(12)
+#define UCTL_CTL_SS_POWER_EN BIT_ULL(14)
+#define UCTL_CTL_H_CLKDIV_SEL GENMASK_ULL(26, 24)
+#define UCTL_CTL_H_CLKDIV_RST BIT_ULL(28)
+#define UCTL_CTL_H_CLK_EN BIT_ULL(30)
+#define UCTL_CTL_REF_CLK_FSEL GENMASK_ULL(37, 32)
+#define UCTL_CTL_REF_CLK_DIV2 BIT_ULL(38)
+#define UCTL_CTL_REF_SSP_EN BIT_ULL(39)
+#define UCTL_CTL_MPLL_MULTIPLIER GENMASK_ULL(46, 40)
+#define UCTL_CTL_SSC_EN BIT_ULL(59)
+#define UCTL_CTL_REF_CLK_SEL GENMASK_ULL(61, 60)
+
+#define UCTL_HOST_CFG 0xe0
+#define UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN BIT_ULL(24)
+#define UCTL_HOST_CFG_PPC_EN BIT_ULL(25)
+
+#define UCTL_SHIM_CFG 0xe8
+#define UCTL_SHIM_CFG_CSR_ENDIAN_MODE GENMASK_ULL(1, 0)
+#define UCTL_SHIM_CFG_DMA_ENDIAN_MODE GENMASK_ULL(9, 8)
+
+#define OCTEON_H_CLKDIV_SEL 8
+#define OCTEON_MIN_H_CLK_RATE 150000000
+#define OCTEON_MAX_H_CLK_RATE 300000000
+
+#define CLOCK_50MHZ 50000000
+#define CLOCK_100MHZ 100000000
+#define CLOCK_125MHZ 125000000
+
+static u8 clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};
+
+static int dwc3_octeon_config_power(struct udevice *dev, void __iomem *base)
+{
+ u64 uctl_host_cfg;
+ u64 gpio_bit;
+ u32 gpio_pwr[3];
+ int gpio, len, power_active_low;
+ const struct device_node *node = dev_np(dev);
+ int index = ((u64)base >> 24) & 1;
+ void __iomem *gpio_bit_cfg;
+
+ if (of_find_property(node, "power", &len)) {
+ if (len == 12) {
+ dev_read_u32_array(dev, "power", gpio_pwr, 3);
+ power_active_low = gpio_pwr[2] & 0x01;
+ gpio = gpio_pwr[1];
+ } else if (len == 8) {
+ dev_read_u32_array(dev, "power", gpio_pwr, 2);
+ power_active_low = 0;
+ gpio = gpio_pwr[1];
+ } else {
+ printf("dwc3 controller clock init failure\n");
+ return -EINVAL;
+ }
+
+ gpio_bit_cfg = ioremap(CVMX_GPIO_BIT_CFGX(gpio), 0);
+
+ if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
+ OCTEON_IS_MODEL(OCTEON_CNF75XX)) && gpio <= 31) {
+ gpio_bit = ioread64(gpio_bit_cfg);
+ gpio_bit |= GPIO_BIT_CFG_TX_OE;
+ gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
+ gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
+ index == 0 ? 0x14 : 0x15);
+ iowrite64(gpio_bit, gpio_bit_cfg);
+ } else if (gpio <= 15) {
+ gpio_bit = ioread64(gpio_bit_cfg);
+ gpio_bit |= GPIO_BIT_CFG_TX_OE;
+ gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
+ gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
+ index == 0 ? 0x14 : 0x19);
+ iowrite64(gpio_bit, gpio_bit_cfg);
+ } else {
+ gpio_bit_cfg = ioremap(CVMX_GPIO_XBIT_CFGX(gpio), 0);
+
+ gpio_bit = ioread64(gpio_bit_cfg);
+ gpio_bit |= GPIO_BIT_CFG_TX_OE;
+ gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
+ gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
+ index == 0 ? 0x14 : 0x19);
+ iowrite64(gpio_bit, gpio_bit_cfg);
+ }
+
+ /* Enable XHCI power control and set if active high or low. */
+ uctl_host_cfg = ioread64(base + UCTL_HOST_CFG);
+ uctl_host_cfg |= UCTL_HOST_CFG_PPC_EN;
+ if (power_active_low)
+ uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
+ else
+ uctl_host_cfg |= UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
+ iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG);
+
+ /* Wait for power to stabilize */
+ mdelay(10);
+ } else {
+ /* Disable XHCI power control and set if active high. */
+ uctl_host_cfg = ioread64(base + UCTL_HOST_CFG);
+ uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_EN;
+ uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
+ iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG);
+ dev_warn(dev, "dwc3 controller clock init failure.\n");
+ }
+
+ return 0;
+}
+
+static int dwc3_octeon_clocks_start(struct udevice *dev, void __iomem *base)
+{
+ u64 uctl_ctl;
+ int ref_clk_sel = 2;
+ u64 div;
+ u32 clock_rate;
+ int mpll_mul;
+ int i;
+ u64 h_clk_rate;
+ void __iomem *uctl_ctl_reg = base;
+ const char *ss_clock_type;
+ const char *hs_clock_type;
+
+ i = dev_read_u32(dev, "refclk-frequency", &clock_rate);
+ if (i) {
+ printf("No UCTL \"refclk-frequency\"\n");
+ return -EINVAL;
+ }
+
+ ss_clock_type = dev_read_string(dev, "refclk-type-ss");
+ if (!ss_clock_type) {
+ printf("No UCTL \"refclk-type-ss\"\n");
+ return -EINVAL;
+ }
+
+ hs_clock_type = dev_read_string(dev, "refclk-type-hs");
+ if (!hs_clock_type) {
+ printf("No UCTL \"refclk-type-hs\"\n");
+ return -EINVAL;
+ }
+
+ if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
+ if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0) {
+ ref_clk_sel = 0;
+ } else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
+ ref_clk_sel = 2;
+ } else {
+ printf("Invalid HS clock type %s, using pll_ref_clk\n",
+ hs_clock_type);
+ }
+ } else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
+ if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0) {
+ ref_clk_sel = 1;
+ } else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
+ ref_clk_sel = 3;
+ } else {
+ printf("Invalid HS clock type %s, using pll_ref_clk\n",
+ hs_clock_type);
+ ref_clk_sel = 3;
+ }
+ } else {
+ printf("Invalid SS clock type %s, using dlmc_ref_clk0\n",
+ ss_clock_type);
+ }
+
+ if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
+ clock_rate != CLOCK_100MHZ)
+ printf("Invalid UCTL clock rate of %u\n", clock_rate);
+
+ /*
+ * Step 1: Wait for all voltages to be stable...that surely
+ * happened before this driver is started. SKIP
+ */
+
+ /* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */
+
+ /* Step 3: Assert all resets. */
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl |= UCTL_CTL_UCTL_RST | UCTL_CTL_UAHC_RST | UCTL_CTL_UPHY_RST;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+
+ /* Step 4a: Reset the clock dividers. */
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl |= UCTL_CTL_H_CLKDIV_RST;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+
+ /* Step 4b: Select controller clock frequency. */
+ for (div = ARRAY_SIZE(clk_div) - 1; div >= 0; div--) {
+ h_clk_rate = gd->bus_clk / clk_div[div];
+ if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE &&
+ h_clk_rate >= OCTEON_MIN_H_CLK_RATE)
+ break;
+ }
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl &= ~UCTL_CTL_H_CLKDIV_SEL;
+ uctl_ctl |= FIELD_PREP(UCTL_CTL_H_CLKDIV_SEL, div);
+ uctl_ctl |= UCTL_CTL_H_CLK_EN;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ if (div != FIELD_GET(UCTL_CTL_H_CLKDIV_SEL, uctl_ctl) ||
+ !(uctl_ctl & UCTL_CTL_H_CLK_EN)) {
+ printf("dwc3 controller clock init failure\n");
+ return -EINVAL;
+ }
+
+ /* Step 4c: Deassert the controller clock divider reset. */
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl &= ~UCTL_CTL_H_CLKDIV_RST;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+
+ /* Step 5a: Reference clock configuration. */
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl &= ~UCTL_CTL_REF_CLK_SEL;
+ uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_SEL, ref_clk_sel);
+ uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL;
+ uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x07);
+ uctl_ctl &= ~UCTL_CTL_REF_CLK_DIV2;
+
+ switch (clock_rate) {
+ default:
+ printf("Invalid ref_clk %u, using %u instead\n", CLOCK_100MHZ,
+ clock_rate);
+ fallthrough;
+ case CLOCK_100MHZ:
+ mpll_mul = 0x19;
+ if (ref_clk_sel < 2) {
+ uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL;
+ uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x27);
+ }
+ break;
+ case CLOCK_50MHZ:
+ mpll_mul = 0x32;
+ break;
+ case CLOCK_125MHZ:
+ mpll_mul = 0x28;
+ break;
+ }
+ uctl_ctl &= ~UCTL_CTL_MPLL_MULTIPLIER;
+ uctl_ctl |= FIELD_PREP(UCTL_CTL_MPLL_MULTIPLIER, mpll_mul);
+
+ /* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */
+ uctl_ctl |= UCTL_CTL_SSC_EN;
+
+ /* Step 5c: Enable SuperSpeed. */
+ uctl_ctl |= UCTL_CTL_REF_SSP_EN;
+
+ /* Step 5d: Configure PHYs. SKIP */
+
+ /* Step 6a & 6b: Power up PHYs. */
+ uctl_ctl |= UCTL_CTL_HS_POWER_EN;
+ uctl_ctl |= UCTL_CTL_SS_POWER_EN;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+
+ /* Step 7: Wait 10 controller-clock cycles to take effect. */
+ udelay(10);
+
+ /* Step 8a: Deassert UCTL reset signal. */
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl &= ~UCTL_CTL_UCTL_RST;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+
+ /* Step 8b: Wait 10 controller-clock cycles. */
+ udelay(10);
+
+ /* Step 8c: Setup power-power control. */
+ if (dwc3_octeon_config_power(dev, base)) {
+ printf("Error configuring power\n");
+ return -EINVAL;
+ }
+
+ /* Step 8d: Deassert UAHC reset signal. */
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl &= ~UCTL_CTL_UAHC_RST;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+
+ /* Step 8e: Wait 10 controller-clock cycles. */
+ udelay(10);
+
+ /* Step 9: Enable conditional coprocessor clock of UCTL. */
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl |= UCTL_CTL_SCLK_EN;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+
+ /* Step 10: Set for host mode only. */
+ uctl_ctl = ioread64(uctl_ctl_reg);
+ uctl_ctl &= ~UCTL_CTL_DRD_MODE;
+ iowrite64(uctl_ctl, uctl_ctl_reg);
+
+ return 0;
+}
+
+static void dwc3_octeon_set_endian_mode(void __iomem *base)
+{
+ u64 shim_cfg;
+
+ shim_cfg = ioread64(base + UCTL_SHIM_CFG);
+ shim_cfg &= ~UCTL_SHIM_CFG_CSR_ENDIAN_MODE;
+ shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_CSR_ENDIAN_MODE, 1);
+ shim_cfg &= ~UCTL_SHIM_CFG_DMA_ENDIAN_MODE;
+ shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_DMA_ENDIAN_MODE, 1);
+ iowrite64(shim_cfg, base + UCTL_SHIM_CFG);
+}
+
+static void dwc3_octeon_phy_reset(void __iomem *base)
+{
+ u64 uctl_ctl;
+
+ uctl_ctl = ioread64(base);
+ uctl_ctl &= ~UCTL_CTL_UPHY_RST;
+ iowrite64(uctl_ctl, base);
+}
+
+static int octeon_dwc3_glue_probe(struct udevice *dev)
+{
+ void __iomem *base;
+
+ base = dev_remap_addr(dev);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ dwc3_octeon_clocks_start(dev, base);
+ dwc3_octeon_set_endian_mode(base);
+ dwc3_octeon_phy_reset(base);
+
+ return 0;
+}
+
+static int octeon_dwc3_glue_bind(struct udevice *dev)
+{
+ ofnode node, dwc3_node;
+
+ /* Find snps,dwc3 node from subnode */
+ dwc3_node = ofnode_null();
+ ofnode_for_each_subnode(node, dev->node) {
+ if (ofnode_device_is_compatible(node, "snps,dwc3"))
+ dwc3_node = node;
+ }
+
+ if (!ofnode_valid(dwc3_node)) {
+ printf("Can't find dwc3 subnode for %s\n", dev->name);
+ return -ENODEV;
+ }
+
+ return dm_scan_fdt_dev(dev);
+}
+
+static const struct udevice_id octeon_dwc3_glue_ids[] = {
+ { .compatible = "cavium,octeon-7130-usb-uctl" },
+ { }
+};
+
+U_BOOT_DRIVER(dwc3_octeon_glue) = {
+ .name = "dwc3_octeon_glue",
+ .id = UCLASS_NOP,
+ .of_match = octeon_dwc3_glue_ids,
+ .probe = octeon_dwc3_glue_probe,
+ .bind = octeon_dwc3_glue_bind,
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
--
2.28.0
