Include ast2500-evb.dtb for CONFIG_ASPEED_AST2500 instead of for all aspeed targets.
ast2400 is based on ARM926EJ-S processor (ARMv5-architecture). ast2500 is based on ARM1176JZS processor (ARMv6-architecture). ast2600 is based on Cortex A7 processor (ARMv7-A architecture). Each of the above SOC is using a different ARM CPU(s) with different ARM architecture revision. It is not possible to support all 3 of these families in a single binary. So there is no need to build ast2500-evb.dtb for other SOC families. Signed-off-by: Thirupathaiah Annapureddy <thir...@linux.microsoft.com> --- Changes in v2: - Incorporated the feedback from Tom Rini and Ryan Chen. arch/arm/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7e29b9096b..33d40a05f9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -938,7 +938,7 @@ dtb-$(CONFIG_ARCH_BCM6858) += \ dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb -dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb +dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb -- 2.25.2