Dear Mehmet Salih YILDIRIM, In message <4c98640a.1060...@protel.tv> you wrote: > > I am using TI's davinci board (microprocessor is dm6446) and I both > tried community u-boot build and I compiled myself. I try to boot kernel > from tftp and fs from nfs but I cannot mount fs. Here is errors: > > IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.2.50 ======================================^^^^^^^ > IP-Config: Complete: > device=eth0, addr=192.168.2.50, mask=255.255.255.0, > gw=192.168.2.1, > host=192.168.2.50, domain=protel.local, nis-domain=(none), > bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= > Looking up port of RPC 100003/2 on 0.0.0.0 > rpcbind: server 0.0.0.0 not responding, timed out ======================^^^^^^^
Seems your DHCP server is muisconfigured. This is a Linux problem, not an U-Boot issue. You are off topic here. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de What the gods would destroy they first submit to an IEEE standards committee. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
