Hi, On 07. 09. 20 10:35, Michal Simek wrote: > There shouldn't be a need to use loadables propertyn because u-boot can be > pointed by firmware property. This change should also speedup boot process > because loadables property is list of strings which code is going through. > On the other hand firmware can just point to one image. > > Signed-off-by: Michal Simek <[email protected]> > --- > > Only done based on grepping the code. Please retest. > --- > board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its > b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its > index 905be57dffd7..dfe89bfad67e 100644 > --- a/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its > +++ b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its > @@ -39,28 +39,28 @@ > config-1 { > /* DT+SoM+board model */ > description = > "dh,stm32mp15xx-dhcom-pdk2_somrev0_boardrev0"; > - loadables = "uboot"; > + firmware = "uboot"; > fdt = "fdt-1"; > }; > > config-2 { > /* DT+SoM+board model */ > description = > "dh,stm32mp15xx-dhcom-pdk2_somrev1_boardrev0"; > - loadables = "uboot"; > + firmware = "uboot"; > fdt = "fdt-1"; > }; > > config-3 { > /* DT+SoM+board model */ > description = > "dh,stm32mp15xx-dhcom-drc02_somrev0_boardrev0"; > - loadables = "uboot"; > + firmware = "uboot"; > fdt = "fdt-2"; > }; > > config-4 { > /* DT+SoM+board model */ > description = > "dh,stm32mp15xx-dhcom-drc02_somrev1_boardrev0"; > - loadables = "uboot"; > + firmware = "uboot"; > fdt = "fdt-2"; > }; > >
Marek: I see there is also dhcor which has the same issue. Will send v2 when someone confirms that this works properly. Thanks, Michal
