All the 10G ports that were working in XFI mode were described as
using XGMII (as PHY_INTERFACE_MODE_XFI was not added at the time).
Add the minimal changes required for the FMan code to support XFI.
Signed-off-by: Madalin Bucur <madalin.bu...@oss.nxp.com>
---
drivers/net/fm/memac.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 0f0f7b0..36f50d2 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -98,6 +98,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
if_mode &= ~IF_MODE_MASK;
if_mode |= (IF_MODE_GMII);
break;
+ case PHY_INTERFACE_MODE_XFI:
case PHY_INTERFACE_MODE_XGMII:
if_mode &= ~IF_MODE_MASK;
if_mode |= IF_MODE_XGMII;
@@ -106,7 +107,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac
*mac,
break;
}
/* Enable automatic speed selection for Non-XGMII */
- if (type != PHY_INTERFACE_MODE_XGMII)
+ if (type != PHY_INTERFACE_MODE_XGMII && type != PHY_INTERFACE_MODE_XFI)
if_mode |= IF_MODE_EN_AUTO;
if (type == PHY_INTERFACE_MODE_RGMII ||
--
2.1.0
