On 9/12/20 8:28 PM, Simon Glass wrote: > At present running some sandbox tests produces unwanted ethernet errors > from the syslog driver, e.g.: > > $ ./u-boot -c "ut bloblist" > > Running 5 bloblist tests > Test: bloblist_test_bad_blob > Test: bloblist_test_blob > Test: bloblist_test_blob_ensure > Failed to allocate e0 bytes size=100, need size=130 > No ethernet found. > bloblist add: returning err=-28 > No ethernet found. > Test: bloblist_test_checksum > Checksum f3129fae != 338fbdc > No ethernet found. > Bad checksum: returning err=-5 > No ethernet found. > ... > > This series fixes this by making the syslog driver disabled by default. It > can be enabled with a function call.
Hello Simon, in log_syslog_emit() I already set processing_msg = 1 to fend of messages from the network driver when writing messages to syslog. The idea was right but not in the right place. This logic should be moved to log_dispatch() to securely avoid that writing messages creates new messages which even might lead to endless recursion. See [PATCH 1/1] log: mute messages generated by log drivers https://lists.denx.de/pipermail/u-boot/2020-September/426418.html Best regards Heinrich > > > Simon Glass (4): > log: Add a flag to enable log drivers > log: Drop #ifdef in log_test > log: Add a way to enable/disable a log device > log: Disable the syslog driver by default > > common/log.c | 42 ++++++++++++++++++++++++++++++++++- > common/log_console.c | 1 + > include/log.h | 28 ++++++++++++++++++++++- > test/log/log_test.c | 9 ++++++-- > test/log/syslog_test.c | 24 ++++++++++++++++++++ > test/log/syslog_test.h | 16 +++++++++++++ > test/log/syslog_test_ndebug.c | 2 ++ > test/py/tests/test_log.py | 8 +++++++ > 8 files changed, 126 insertions(+), 4 deletions(-) >