This driver does not use DM, so we need to use a struct device instead of a struct udevice. Not ideal, but it'll have to do for now.
Signed-off-by: Sean Anderson <[email protected]> --- Changes in v2: - New drivers/usb/musb-new/sunxi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index 53c336fc3f..cf128f148c 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -301,21 +301,21 @@ static int sunxi_musb_init(struct musb *musb) ret = clk_enable(&glue->clk); if (ret) { - dev_err(dev, "failed to enable clock\n"); + dev_err(musb->controller, "failed to enable clock\n"); return ret; } if (reset_valid(&glue->rst)) { ret = reset_deassert(&glue->rst); if (ret) { - dev_err(dev, "failed to deassert reset\n"); + dev_err(musb->controller, "failed to deassert reset\n"); goto err_clk; } } ret = generic_phy_init(&glue->phy); if (ret) { - dev_err(dev, "failed to init USB PHY\n"); + dev_err(musb->controller, "failed to init USB PHY\n"); goto err_rst; } @@ -352,7 +352,8 @@ static int sunxi_musb_exit(struct musb *musb) if (generic_phy_valid(&glue->phy)) { ret = generic_phy_exit(&glue->phy); if (ret) { - dev_err(dev, "failed to power off usb phy\n"); + dev_err(musb->controller, + "failed to power off usb phy\n"); return ret; } } -- 2.28.0
