On Tue, 14 Sep 2010 19:13:50 -0500
Peter Tyser <pty...@xes-inc.com> wrote:

> This change lays the groundwork for the BOOTFLAG_* flags being removed.
> 
> This change has the small affect of delaying 100ms on PCI initialization
> after a warm boot as opposed to the optimal 1ms on some boards.
> 
> Signed-off-by: Peter Tyser <pty...@xes-inc.com>
> CC: kim.phill...@freescale.com
> ---
>  arch/powerpc/cpu/mpc83xx/pci.c            |    6 +++---
>  arch/powerpc/cpu/mpc83xx/pcie.c           |    6 +++---
>  board/esd/vme8349/pci.c                   |    2 +-
>  board/freescale/mpc8308rdb/mpc8308rdb.c   |    2 +-
>  board/freescale/mpc8313erdb/mpc8313erdb.c |    8 +-------
>  board/freescale/mpc8315erdb/mpc8315erdb.c |    8 ++------
>  board/freescale/mpc8323erdb/mpc8323erdb.c |    2 +-
>  board/freescale/mpc832xemds/pci.c         |    6 +++---
>  board/freescale/mpc8349emds/pci.c         |    6 +++---
>  board/freescale/mpc8349itx/pci.c          |    4 ++--
>  board/freescale/mpc8360emds/pci.c         |    6 +++---
>  board/freescale/mpc8360erdk/mpc8360erdk.c |    2 +-
>  board/freescale/mpc837xemds/pci.c         |    2 +-
>  board/freescale/mpc837xerdb/pci.c         |    4 ++--
>  board/matrix_vision/mvblm7/pci.c          |    5 +----
>  board/sbc8349/pci.c                       |    2 +-
>  board/sheldon/simpc8313/simpc8313.c       |    5 +----
>  board/tqc/tqm834x/pci.c                   |    2 +-
>  board/ve8313/ve8313.c                     |    5 +----
>  include/mpc83xx.h                         |    4 ++--
>  20 files changed, 34 insertions(+), 53 deletions(-)

applied to u-boot-mpc83xx/next, with the following added due to account
for the new board:

diff --git a/board/mpc8308_p1m/mpc8308_p1m.c b/board/mpc8308_p1m/mpc8308_p1m.c
index 0c70b15..d92833b 100644
--- a/board/mpc8308_p1m/mpc8308_p1m.c
+++ b/board/mpc8308_p1m/mpc8308_p1m.c
@@ -74,7 +74,7 @@ void pci_init_board(void)
        out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
        out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
 
-       mpc83xx_pcie_init(1, pcie_reg, 0);
+       mpc83xx_pcie_init(1, pcie_reg);
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)

Thanks,

Kim

n.b., if this was part of a series that was to be applied in whole by
one maintainer, please state that up front.  I decided to apply this
since (a) it needed rebasing for the new board, and (b) it's the 1st in
the series, and git will automatically merge it for that single
maintainer come apply time.

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to