Fix the actual board vendor and ease synching dts files from Linux.

Signed-off-by: Andre Heider <a.hei...@gmail.com>
---
v3: rebase on master

 arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
 board/Marvell/mvebu_armada-37xx/board.c  | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/armada-3720-espressobin.dts 
b/arch/arm/dts/armada-3720-espressobin.dts
index 4534f5ff29..be67a45870 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -50,8 +50,8 @@
 #include "armada-372x.dtsi"
 
 / {
-       model = "Marvell Armada 3720 Community Board ESPRESSOBin";
-       compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", 
"marvell,armada3710";
+       model = "Globalscale Marvell ESPRESSOBin Board";
+       compatible = "globalscale,espressobin", "marvell,armada3720", 
"marvell,armada3710";
 
        chosen {
                stdout-path = "serial0:115200n8";
diff --git a/board/Marvell/mvebu_armada-37xx/board.c 
b/board/Marvell/mvebu_armada-37xx/board.c
index 2bfc7171c4..73d69e0388 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -88,14 +88,14 @@ int board_late_init(void)
        if (env_get("fdtfile"))
                return 0;
 
-       if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+       if (!of_machine_is_compatible("globalscale,espressobin"))
                return 0;
 
        /* If the memory controller has been configured for DDR4, we're running 
on v7 */
        ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> 
A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
                & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == 
A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
 
-       emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
+       emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
 
        if (ddr4 && emmc)
                env_set("fdtfile", 
"marvell/armada-3720-espressobin-v7-emmc.dtb");
@@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, 
int dev_smi_addr,
 /* Bring-up board-specific network stuff */
 int board_network_enable(struct mii_dev *bus)
 {
-       if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+       if (!of_machine_is_compatible("globalscale,espressobin"))
                return 0;
 
        /*
@@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
        int part_off;
 
        /* Fill SPI MTD partitions for Linux kernel on Espressobin */
-       if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+       if (!of_machine_is_compatible("globalscale,espressobin"))
                return 0;
 
        spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
-- 
2.28.0

Reply via email to