CCing Heinrich, I think you should be interested in this patch.

On Friday 02 October 2020 07:51:12 Andre Heider wrote:
> Fix the actual board vendor and ease synching dts files from Linux.
> 
> Signed-off-by: Andre Heider <a.hei...@gmail.com>

Reviewed-by: Pali Rohár <p...@kernel.org>

> ---
> v3: rebase on master
> 
>  arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
>  board/Marvell/mvebu_armada-37xx/board.c  | 8 ++++----
>  2 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts 
> b/arch/arm/dts/armada-3720-espressobin.dts
> index 4534f5ff29..be67a45870 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -50,8 +50,8 @@
>  #include "armada-372x.dtsi"
>  
>  / {
> -     model = "Marvell Armada 3720 Community Board ESPRESSOBin";
> -     compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", 
> "marvell,armada3710";
> +     model = "Globalscale Marvell ESPRESSOBin Board";
> +     compatible = "globalscale,espressobin", "marvell,armada3720", 
> "marvell,armada3710";
>  
>       chosen {
>               stdout-path = "serial0:115200n8";
> diff --git a/board/Marvell/mvebu_armada-37xx/board.c 
> b/board/Marvell/mvebu_armada-37xx/board.c
> index 2bfc7171c4..73d69e0388 100644
> --- a/board/Marvell/mvebu_armada-37xx/board.c
> +++ b/board/Marvell/mvebu_armada-37xx/board.c
> @@ -88,14 +88,14 @@ int board_late_init(void)
>       if (env_get("fdtfile"))
>               return 0;
>  
> -     if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> +     if (!of_machine_is_compatible("globalscale,espressobin"))
>               return 0;
>  
>       /* If the memory controller has been configured for DDR4, we're running 
> on v7 */
>       ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> 
> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
>               & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == 
> A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
>  
> -     emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
> +     emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
>  
>       if (ddr4 && emmc)
>               env_set("fdtfile", 
> "marvell/armada-3720-espressobin-v7-emmc.dtb");
> @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, 
> int dev_smi_addr,
>  /* Bring-up board-specific network stuff */
>  int board_network_enable(struct mii_dev *bus)
>  {
> -     if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> +     if (!of_machine_is_compatible("globalscale,espressobin"))
>               return 0;
>  
>       /*
> @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
>       int part_off;
>  
>       /* Fill SPI MTD partitions for Linux kernel on Espressobin */
> -     if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> +     if (!of_machine_is_compatible("globalscale,espressobin"))
>               return 0;
>  
>       spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
> -- 
> 2.28.0
> 

Reply via email to