Hi Alexandru, > From: Alexandru Gagniuc <[email protected]> > Sent: mardi 15 septembre 2020 21:52 > To: [email protected]; [email protected] > Cc: Alexandru Gagniuc <[email protected]>; Patrick DELAUNAY > <[email protected]>; Patrice CHOTARD <[email protected]>; u- > [email protected] > Subject: [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap- > mmc-highspeed" > Importance: High > > "cap-mmc-highspeed" enables support for 26 MHz MMC, but there is no additional > flag to enable 52 MHz MMC. In Linux. "cap-mmc-highspeed" > is used for MMC HS at both 26MHz and 52MHz. > > Use the same approach and enable MMC_CAP(MMC_HS_52) host capability > when "cap-mmc-highspeed" is found in the devicetree. In the event an MMC card > doesn't support 52 MHz, it will be clocked at a speed based on its EXT CSD, > even > on 52 MHz host controllers > > Signed-off-by: Alexandru Gagniuc <[email protected]> > --- > drivers/mmc/mmc-uclass.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) >
Applied to u-boot-stm/master, thanks! Regards Patrick
