Hi Christian,

On 26/10/2020 14:37, Christian Gmeiner wrote:
Hi all

Is there any update regarding this patch series?

I am working on revising this driver. Once ready I will post the updated 
version upstream.

cheers,
-roger




Am Do., 20. Feb. 2020 um 10:19 Uhr schrieb Keerthy <[email protected]>:



On 18/02/20 10:39 am, Keerthy wrote:
The series adds support for icssg_prueth functionality
on u-boot. This series is based on top of master branch.
rproc init needs to be done from uboot command prompt.
The pru/rtu firmware loading is done by prueth driver soon after
config paramters are setup.

A quick update on this series. It seems newer version of this hardware
needs more modifications to this series. Hence please ignore v2.

Best Regards,
Keerthy


Currently only slice0/1 of icssg2 instance on am6-evm
is supported. i.e Both slices of icssg2 instance are supported.

Prebuilt firmware can be obtained from AM65 procSDK [1] rootfs at 
/lib/firmware/ti-pruss/am65x*.elf

[1] 
http://software-dl.ti.com/processor-sdk-linux/esd/AM65X/latest/index_FDS.html

This tests tftp on prueth.

Note: Uboot ethernet driver architecture supports once
instance per probe. So only one of the ports are supported
per instance. So DT of prueth node should have either ethernet-mii0
or ethernet-mii1.

Changes in v2:

It has been a while since v1 was posted. Here are the changes:

    * Removed the usage of misc_init_by_ofnode instead used
      uclass_get_device_by_ofnode.
    * Introduced started variable to keep track of the status of the
      prueth device.
    * Build Tested on Travis: 
https://travis-ci.org/Keerthyj/u-boot/builds/651449684

Keerthy (10):
    net: eth-uclass: eth_get_dev based on SEQ_ALIAS instead of probe order
    soc: ti: pruss: add a misc driver for PRUSS in TI  SoCs
    remoteproc: pruss: add PRU remoteproc driver
    net: ti: icssg-prueth: Add ICSSG ethernet driver
    arm: dts: k3-am65-main: Add msmc_ram node
    arm: dts: k3-am654-base-board-u-boot: Add icssg specific msmc_ram
      carveout nodes
    arm: dts: k3-am65-main: Add scm_conf node
    arm: dts: k3-am65-main: Add pruss nodes for ICSSG2
    arm64: dts: ti: am654-base-board: add ICSSG2 Ethernet support
    configs: am65x_evm_a53_defconfig: Enable CONFIG_TI_AM64_ICSSG_PRUETH

   arch/arm/dts/k3-am65-main.dtsi               | 191 ++++++
   arch/arm/dts/k3-am65.dtsi                    |   4 +-
   arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 129 ++++
   configs/am65x_evm_a53_defconfig              |   3 +
   drivers/net/ti/Kconfig                       |   8 +
   drivers/net/ti/Makefile                      |   1 +
   drivers/net/ti/icssg-prueth.c                | 652 +++++++++++++++++++
   drivers/net/ti/icssg.h                       |  36 +
   drivers/net/ti/icssg_classifier.c            | 396 +++++++++++
   drivers/remoteproc/Kconfig                   |  11 +
   drivers/remoteproc/Makefile                  |   1 +
   drivers/remoteproc/pru_rproc.c               | 405 ++++++++++++
   drivers/soc/ti/Kconfig                       |  12 +
   drivers/soc/ti/Makefile                      |   1 +
   drivers/soc/ti/pruss.c                       | 152 +++++
   include/ti-pruss.h                           |  17 +
   net/eth-uclass.c                             |  12 +-
   17 files changed, 2027 insertions(+), 4 deletions(-)
   create mode 100644 drivers/net/ti/icssg-prueth.c
   create mode 100644 drivers/net/ti/icssg.h
   create mode 100644 drivers/net/ti/icssg_classifier.c
   create mode 100644 drivers/remoteproc/pru_rproc.c
   create mode 100644 drivers/soc/ti/pruss.c
   create mode 100644 include/ti-pruss.h





--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Reply via email to