Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and introduced due to the global Kconfig migration of this option in u-boot.
CC: Heiko Schocher <[email protected]> CC: Tom Rini <[email protected]> Signed-off-by: Holger Brunck <[email protected]> --- board/keymile/km83xx/Kconfig | 6 ++++++ board/keymile/km83xx/km83xx.c | 8 ++------ include/configs/kmcoge5ne.h | 2 +- 3 files changed, 9 insertions(+), 7 deletions(-) diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig index bbafabdcb2..8247ae39d3 100644 --- a/board/keymile/km83xx/Kconfig +++ b/board/keymile/km83xx/Kconfig @@ -15,6 +15,12 @@ config KM_ENABLE_FULL_DM_DTS_SUPPORT select PHYLIB endmenu +config SYS_MEMTEST_START + default 0x00100000 + +config SYS_MEMTEST_END + default 0x00f00000 + if TARGET_KMETER1 config SYS_BOARD diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 9eb000cca4..a984165e24 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -236,12 +236,8 @@ void post_word_store(ulong value) int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset) { - /* - * These match CONFIG_SYS_MEMTEST_START and - * (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) - */ - *vstart = 0x00100000; - *size = 0xe00000; + *vstart = CONFIG_SYS_MEMTEST_START; + *size = CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START; debug("arch_memory_test_prepare 0x%08X 0x%08X\n", *vstart, *size); return 0; diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index 4d01f236c3..cdfb280aee 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -51,7 +51,7 @@ /* enable POST tests */ #define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) #define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */ -#define CPM_POST_WORD_ADDR 0x00f00000 +#define CPM_POST_WORD_ADDR CONFIG_SYS_MEMTEST_END #define CONFIG_TESTPIN_REG gprt3 /* for kmcoge5ne */ #define CONFIG_TESTPIN_MASK 0x20 /* for kmcoge5ne */ -- 2.26.0
