On 05.11.20 10:15, Holger Brunck wrote:
This option is obsolete since 2009 and can be removed globally.
CC: Stefan Roese <[email protected]>
Signed-off-by: Holger Brunck <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Thanks,
Stefan
---
include/configs/ethernut5.h | 1 -
include/configs/km/km-powerpc.h | 2 --
include/configs/kmp204x.h | 3 ---
include/configs/pm9263.h | 1 -
include/configs/stmark2.h | 1 -
scripts/config_whitelist.txt | 1 -
6 files changed, 9 deletions(-)
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index b513b4bc68..ca249d9d2b 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -62,7 +62,6 @@
/* JFFS2 */
#ifdef CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_NAND
#endif
diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 7bfe12fecb..3be926c103 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -9,8 +9,6 @@
/* Do boardspecific init for all boards */
-#define CONFIG_JFFS2_CMDLINE
-
/* EEprom support 24C08, 24C16, 24C64 */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */
diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h
index ec1254e747..d1eb7b574b 100644
--- a/include/configs/kmp204x.h
+++ b/include/configs/kmp204x.h
@@ -337,9 +337,6 @@ int get_scl(void);
* additionnal command line configuration.
*/
-/* we don't need flash support */
-#undef CONFIG_JFFS2_CMDLINE
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 64 MB of memory, since this is
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 0ed4b1aaa2..6c882b6ff9 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -190,7 +190,6 @@
#endif
-#define CONFIG_JFFS2_CMDLINE 1
#define CONFIG_JFFS2_NAND 1
#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h
index d9a2f75e73..da162cbb11 100644
--- a/include/configs/stmark2.h
+++ b/include/configs/stmark2.h
@@ -49,7 +49,6 @@
#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000
/* spi not partitions */
-#define CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
/* Timer */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index a9508448d4..be3a4b3e9a 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -848,7 +848,6 @@ CONFIG_IRAM_STACK
CONFIG_IRAM_TOP
CONFIG_IRDA_BASE
CONFIG_IS_ENABLED
-CONFIG_JFFS2_CMDLINE
CONFIG_JFFS2_DEV
CONFIG_JFFS2_LZO
CONFIG_JFFS2_NAND
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
