Hello Fabio,
Am 12.11.2020 um 13:52 schrieb Fabio Estevam:
Hi Heiko,
On Thu, Nov 12, 2020 at 2:12 AM Heiko Schocher <[email protected]> wrote:
Hmm... just tried cuurent mainline on an imx6ull based board, works
fine for me, see log [1] ... Ok, I boot signed image: u-boot-ivt.img.signed
Thanks for your test.
I suppose your board does not use CONFIG_SPL_LOAD_FIT=y.
No ...
If you have a chance to try loading SPL and u-boot-dtb.img via
imx_usb_loader using a wandboard, I believe you will be able to
reproduce the problem.
I have here a wandboard which I have in my daily U-Boot mainline
testing:
http://xeidos.ddns.net/ubtestresults/home
But I boot from sd card ...
It looks like the issue I am having is the same as the one reported by Tim:
http://u-boot.10912.n7.nabble.com/iMX8MM-USB-support-td405349.html
Hmm... I can not say here more without trying out ... currently
it is hard to find some freetime ... I can just speculate now ...
your log:
"""
load_size 0 bytes
load_addr 0x00000000
dcd 1
clear_dcd 0
plug 1
jump_mode 3
jump_addr 0x00000000
== end work item
header not found 8400:2e77d044, 4000
do_download failed, err=-22
HAB security state: development mode (0x56787856)
"""
Hmm... there is no line:
loading binary file(/srv/tftpboot/imx6ull_pat_defconfig/20201016/u-boot-ivt.img.signed) to 84ffffc0,
skip=0, fsize=94960 type=aa
instead:
header not found 8400:2e77d044, 4000
So this seems to me failing in imx_usb_loader code ...
The "header not found" comes from imx_sdp.c
May you enable dbg_printf() in imx_usb_loader code ... it seems
to me, that there is a problem with missing some header in your
file you try to download .... may you can compare with working one?
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: [email protected]
