Hello! I would like to remind this patch. I do not know who is maintainer of Makefile and therefore who can take this patch but Simon has already reviewed it.
On Tuesday 27 October 2020 20:10:37 Simon Glass wrote: > On Mon, 26 Oct 2020 at 07:11, Pali Rohár <p...@kernel.org> wrote: > > > > On more places is used pattern 'command > $@ || rm -f $@'. But it does not > > propagate failure from 'command' as 'rm -f' returns success. > > > > Fix it by calling 'false' to correctly propagate failure after 'rm -f'. > > > > Signed-off-by: Pali Rohár <p...@kernel.org> > > --- > > Makefile | 12 ++++++------ > > 1 file changed, 6 insertions(+), 6 deletions(-) > > Reviewed-by: Simon Glass <s...@chromium.org> > > But I'm not sure about the use of {}. I would normally use () > > > > > > diff --git a/Makefile b/Makefile > > index 5a0ef18668..94feb7d9a5 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -1005,7 +1005,7 @@ cmd_cat = cat $(filter-out $(PHONY), $^) > $@ > > append = cat $(filter-out $< $(PHONY), $^) >> $@ > > > > quiet_cmd_pad_cat = CAT $@ > > -cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ > > +cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; } > > > > quiet_cmd_lzma = LZMA $@ > > cmd_lzma = lzma -c -z -k -9 $< > $@ > > @@ -1312,7 +1312,7 @@ endif > > shell_cmd = { $(echo-cmd) $(cmd_$(1)); } > > > > quiet_cmd_objcopy_uboot = OBJCOPY $@ > > -cmd_objcopy_uboot = $(cmd_objcopy) && $(call > > shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || rm -f $@ > > +cmd_objcopy_uboot = $(cmd_objcopy) && $(call > > shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; } > > > > u-boot-nodtb.bin: u-boot FORCE > > $(call if_changed,objcopy_uboot) > > @@ -1584,12 +1584,12 @@ u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE > > ifneq ($(CONFIG_ARCH_SOCFPGA),) > > quiet_cmd_gensplx4 = GENSPLX4 $@ > > cmd_gensplx4 = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ > > - spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || rm -f > > $@ > > + spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm > > -f $@; false; } > > spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE > > $(call if_changed,gensplx4) > > > > quiet_cmd_socboot = SOCBOOT $@ > > -cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || rm -f $@ > > +cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; > > false; } > > u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE > > $(call if_changed,socboot) > > > > @@ -1599,12 +1599,12 @@ cmd_gensplpadx4 = dd if=/dev/zero > > of=spl/u-boot-spl.pad bs=64 count=1024 ; \ > > spl/u-boot-spl.sfp spl/u-boot-spl.pad \ > > spl/u-boot-spl.sfp spl/u-boot-spl.pad \ > > spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \ > > - rm -f $@ spl/u-boot-spl.pad > > + { rm -f $@ spl/u-boot-spl.pad; false; } > > u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE > > $(call if_changed,gensplpadx4) > > > > quiet_cmd_socnandboot = SOCNANDBOOT $@ > > -cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || rm -f $@ > > +cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; > > false; } > > u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE > > $(call if_changed,socnandboot) > > > > -- > > 2.20.1 > >