The USB support is not by default enabled on all designs, so it does not make seance to have USB specific erratum's enabled on such a designs.
On our internal Hitachi-Powergrids design not using the USB controller there is a crash when accessing those specific memory locations selected by the erratum flags. Signed-off-by: Aleksandar Gerasimovski <[email protected]> --- arch/arm/cpu/armv7/ls102xa/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 937989b..747059b 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -5,11 +5,11 @@ config ARCH_LS1021A select SYS_FSL_ERRATUM_A008378 select SYS_FSL_ERRATUM_A008407 select SYS_FSL_ERRATUM_A008850 - select SYS_FSL_ERRATUM_A008997 - select SYS_FSL_ERRATUM_A009007 - select SYS_FSL_ERRATUM_A009008 + select SYS_FSL_ERRATUM_A008997 if USB + select SYS_FSL_ERRATUM_A009007 if USB + select SYS_FSL_ERRATUM_A009008 if USB select SYS_FSL_ERRATUM_A009663 - select SYS_FSL_ERRATUM_A009798 + select SYS_FSL_ERRATUM_A009798 if USB select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 select SYS_FSL_HAS_CCI400 -- 1.8.3.1
