On Wed, Dec 9, 2020 at 7:57 AM Stefan Roese <[email protected]> wrote:
>
> Hi Dennis,
>
> On 09.12.20 04:07, [email protected] wrote:
> > In an effort to build SPI images for clearfog and helios4 I needed to make
> > some
> > minor changes to the dts and Kconfig for the helios4 and set some variables
> > for
> > UART and SATA images for ClearFog.
> >
> > Version 2 dropped changes for db-mv784mp-gp as the board turns out to be
> > currently
> > broken, the serial port is not available and the system bails after loading
> > the SPL
> > the dts changes for the helios4 have been shrunk back to remove everything
> > not
> > needed or valid
>
> Could you please test this small patch on the db-mv784mp-gp and report
> back, if this works:
>
> diff --git a/arch/arm/dts/armada-xp-gp.dts b/arch/arm/dts/armada-xp-gp.dts
> index 1139e9469a..57abbbba58 100644
> --- a/arch/arm/dts/armada-xp-gp.dts
> +++ b/arch/arm/dts/armada-xp-gp.dts
> @@ -93,6 +93,7 @@
> internal-regs {
> serial@12000 {
> status = "okay";
> + u-boot,dm-pre-reloc;
with this dts change the serial port is registered correctly
Dennis
> };
> serial@12100 {
> status = "okay";
>
>
> Thanks,
> Stefan
>
--
Dennis Gilmore
Multiple Architecture Portfolio Enablement
T: +1-312-660-3523
