On Thu, Dec 10, 2020 at 11:03 AM Rick Chen <rickche...@gmail.com> wrote: > > Hi Padmarao > > > From: Padmarao Begari [mailto:padmarao.beg...@microchip.com] > > Sent: Thursday, December 03, 2020 4:32 AM > > To: u-boot@lists.denx.de; bmeng...@gmail.com; Rick Jian-Zhi Chen(陳建志); > > anup.pa...@wdc.com; lukas.a...@aisec.fraunhofer.de; joe.hershber...@ni.com; > > lu...@denx.de; atish.pa...@wdc.com > > Cc: cyril.j...@microchip.com; lewis.ha...@microchip.com; > > ivan.grif...@emdalo.com; daire.mcnam...@emdalo.com; > > conor.doo...@microchip.com; Padmarao Begari > > Subject: [PATCH v5 0/7] Microchip PolarFire SoC support > > > > This patch set adds Microchip PolarFire SoC Icicle Kit support > > to RISC-V U-Boot. > > > > The patches are based upon latest U-Boot tree > > (https://gitlab.denx.de/u-boot/u-boot.git) at commit id > > 80cbd731df50b9ab646940ea862b70bcaff37225 > > > > All drivers namely: NS16550 Serial, Microchip clock, > > Cadence eMMC and Cadence MACB Ethernet work fine on actual > > Microchip PolarFire SoC Icicle Kit. > > > > Changes in v5: > > - Replace compatible string "microchip,polarfire-soc" with > > "microchip,mpfs-icicle-kit" in the device tree > > - Use "mpfs" as identifier in place of "polarfire-soc", "pfsoc" > > - Fix some typos in doc > > - Rename the clock driver files clk_pfsoc_* to mpfs_clk_* > > - Rename pfsoc-clock.h to mpfs-clock.h > > > > Changes in v4: > > - Add dual-license GPL or MIT in the device tree > > - Replace microsemi compatible strings with microchip > > - Add MACB compatible string for Microchip PolarFire SoC ethernet > > - Update MACB driver for 32-bit/64-bit DMA based on compatible string > > > > Changes in v3: > > - Add 'default y if 64BIT' for config DMA_ADDR_T_64BIT > > - Update MACB driver for 32-bit/64-bit DMA based on design config register > > - Add phy-handle in MACB driver to read the phy address from device tree > > - Fix checkpatch warnings in the clock driver > > - Remove fu540 related compatible strings from soc device tree node > > - Move refclk device tree node under /soc device tree node > > - Use local-mac-address instead of mac-address in the device tree > > - Rename device tree to microchip-mpfs-icicle-kit.dts > > - Add U-Boot specific dts microchip-mpfs-icicle-kit-u-boot.dtsi file > > - Drop the imply DMA_ADDR_T_64BIT from board config > > - Fix some typos > > - Update doc with Microchip and Custom boot-flow > > > > Changes in v2: > > - Add clock frequency for the clint device tree node > > - Move peripheral device tree nodes under /soc device tree node > > - Device tree nodes are in order based on the address > > - Enable UART0 for U-Boot logs > > - Update doc for the U-Boot logs are on UART0 > > - Move clock and reset index source into patch4 > > - Remove "dma_addr_r" type in the macb driver > > - Add lower_32_bits() for 32-bit address in the macb driver > > - Add set_rate() returns the new clock rate in the clock driver > > > > Padmarao Begari (7): > > riscv: Add DMA 64-bit address support > > net: macb: Add DMA 64-bit address support for macb > > net: macb: Add phy address to read it from device tree > > clk: Add Microchip PolarFire SoC clock driver > > riscv: dts: Add device tree for Microchip Icicle Kit > > riscv: Add Microchip MPFS Icicle Kit support > > doc: board: Add Microchip MPFS Icicle Kit doc > > > > Please check about the CI failure item Job #95.59 > https://travis-ci.org/github/rickchen36/u-boot-riscv/jobs/748298546
I would like to also take a look at the changes today. Regards, Bin