Hello Albert,
Heiko Schocher wrote:
> Albert Aribaud wrote:
>> HISTORY:
>>
>> V1 Initial patch
>> V2 Rebased on latest mainline master
>>
>> This patch is *not* a submission for master!
>>
>> It is a proof of concept of ELF relocations for ARM, hastily done
>> in a day's work time for people on the list to try and to comment.
>> All comments are welcome, as several suggestions have been made
>> today on the list that I did not have time to incorporate, such as
>> rewriting the elf table fixup code in C.
>
> Following patch works on the tx25 with booting from nand:
Sorry, I was to fast, I had a problem with to big nand_spl code,
fixed this now, as I didn;t activate -pie flag for NAND_SPL code,
as this don;t need relocation.
Also I use "blo" instead "ble" in start.S
here now the v2 patch for the tx25 board:
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index e9e02da..19b8f02 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -72,4 +72,6 @@ PLATFORM_LIBS += $(OBJTREE)/arch/arm/lib/eabi_compat.o
endif
endif
LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
-PLATFORM_LDFLAGS += -pie
\ No newline at end of file
+ifndef CONFIG_NAND_SPL
+PLATFORM_LDFLAGS += -pie
+endif
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 5a7ae7e..68e597c 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -266,7 +266,7 @@ fixnext:
str r1, [r0]
add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
- ble fixloop
+ blo fixloop
#endif
#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
@@ -295,10 +295,10 @@ clbss_l:str r2, [r0] /* clear
loop... */
*/
#ifdef CONFIG_NAND_SPL
ldr r0, _nand_boot_ofs
- adr r1, _start
- add pc, r0, r1
-_nand_boot_ofs
- : .word nand_boot - _start
+ mov pc, r0
+
+_nand_boot_ofs:
+ .word nand_boot
#else
ldr r0, _board_init_r_ofs
adr r1, _start
diff --git a/board/karo/tx25/config.mk b/board/karo/tx25/config.mk
index 51ca1ab..8be6466 100644
--- a/board/karo/tx25/config.mk
+++ b/board/karo/tx25/config.mk
@@ -1,5 +1,5 @@
ifdef CONFIG_NAND_SPL
TEXT_BASE = 0x810c0000
else
-TEXT_BASE = 0x81fc0000
+TEXT_BASE = 0x81200000
endif
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index c798570..2be3699 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -41,7 +41,7 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
-#define CONFIG_SYS_NAND_U_BOOT_DST (0x81fc0000)
+#define CONFIG_SYS_NAND_U_BOOT_DST (0x81200000)
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
@@ -178,6 +178,7 @@
/* additions for new relocation code, must added to all boards */
#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation
support */
+#define CONFIG_RELOC_FIXUP_WORKS
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000
- /* Fix this */ \
CONFIG_SYS_GBL_DATA_SIZE)
diff --git a/nand_spl/board/karo/tx25/u-boot.lds
b/nand_spl/board/karo/tx25/u-boot.lds
index c572557..5f95c87 100644
--- a/nand_spl/board/karo/tx25/u-boot.lds
+++ b/nand_spl/board/karo/tx25/u-boot.lds
@@ -53,6 +53,11 @@ SECTIONS
*(.data.rel.ro)
}
+ . = ALIGN(4);
+ __rel_dyn_start = .;
+ __rel_dyn_end = .;
+ __dynsym_start = .;
+
__got_start = .;
. = ALIGN(4);
.got : { *(.got) }
@@ -67,4 +72,12 @@ SECTIONS
__bss_start = .;
.bss : { *(.bss) }
_end = .;
+ /DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynsym*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.hash*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
