On 1/2/21 5:44 PM, Marek Vasut wrote:
The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the
correctness of the DT.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
---
arch/arm/dts/stm32mp15xx-dhcom-drc02.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
index e8508aa4d5a..4948ccd4014 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
+++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
@@ -37,7 +37,7 @@
*/
usb-hub {
gpio-hog;
- gpios = <8 GPIO_ACTIVE_HIGH>;
+ gpios = <8 0>;
output-high;
line-name = "rs485-rx-en";
};
@@ -65,7 +65,7 @@
*/
usb-hub {
gpio-hog;
- gpios = <2 GPIO_ACTIVE_HIGH>;
+ gpios = <2 0>;
output-high;
line-name = "usb-hub-reset";
};
Reviewed-by: Patrick Delaunay <[email protected]>
Thanks
Patrick
