On 1/11/21 2:11 PM, Jernej Skrabec wrote: > H616 uses different address for reset. Add it. > > Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net> > --- > arch/arm/cpu/armv8/fel_utils.S | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/cpu/armv8/fel_utils.S b/arch/arm/cpu/armv8/fel_utils.S > index 9510dcd9e4c1..2dbd4b365221 100644 > --- a/arch/arm/cpu/armv8/fel_utils.S > +++ b/arch/arm/cpu/armv8/fel_utils.S > @@ -40,7 +40,10 @@ ENTRY(return_to_fel) > str w2, [x1] > > ldr x0, =0xfa50392f // CPU hotplug magic > -#ifdef CONFIG_MACH_SUN50I_H6 > +#ifdef CONFIG_MACH_SUN50I_H616 > + ldr x2, =(SUNXI_RTC_BASE + 0x5c0)
This is more accurately (SUNXI_R_CPUCFG_BASE + 0x1c0). This is noticeable in secure mode, where the RTC is accessible but R_CPUCFG is not. Cheers, Samuel > + str w0, [x2], #0x4 > +#elif CONFIG_MACH_SUN50I_H6 > ldr x2, =(SUNXI_RTC_BASE + 0x1b8) // BOOT_CPU_HP_FLAG_REG > str w0, [x2], #0x4 > #else >
