From: Faiz Abbas <faiz_ab...@ti.com>

Not all controllers need calibration for the PHY DLL. Add a DLL_CALIB
flag to indicate the same.

Also move the write of trm_icp and driver strength to the set_clock()
function to match the kernel configuration flow.

Signed-off-by: Faiz Abbas <faiz_ab...@ti.com>
Signed-off-by: Aswath Govindraju <a-govindr...@ti.com>
---
 drivers/mmc/am654_sdhci.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
index e0136dff9711..1e0654183811 100644
--- a/drivers/mmc/am654_sdhci.c
+++ b/drivers/mmc/am654_sdhci.c
@@ -84,6 +84,7 @@ struct am654_sdhci_plat {
 #define IOMUX_PRESENT  BIT(1)
 #define FREQSEL_2_BIT  BIT(2)
 #define STRBSEL_4_BIT  BIT(3)
+#define DLL_CALIB      BIT(4)
 };
 
 struct timing_data {
@@ -195,6 +196,15 @@ static int am654_sdhci_set_ios_post(struct sdhci_host 
*host)
                                           freqsel << FREQSEL_SHIFT);
                }
 
+               /* Configure DLL TRIM */
+               mask = DLL_TRIM_ICP_MASK;
+               val = plat->trm_icp << DLL_TRIM_ICP_SHIFT;
+
+               /* Configure DLL driver strength */
+               mask |= DR_TY_MASK;
+               val |= plat->drv_strength << DR_TY_SHIFT;
+               regmap_update_bits(plat->base, PHY_CTRL1, mask, val);
+
                /* Enable DLL */
                regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK,
                                   0x1 << ENDLL_SHIFT);
@@ -221,7 +231,7 @@ int am654_sdhci_init(struct am654_sdhci_plat *plat)
        mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
        regmap_update_bits(plat->base, PHY_CTRL4, mask, 0x0);
 
-       if (plat->flags & DLL_PRESENT) {
+       if (plat->flags & DLL_CALIB) {
                regmap_read(plat->base, PHY_STAT1, &val);
                if (~val & CALDONE_MASK) {
                        /* Calibrate IO lines */
@@ -233,15 +243,6 @@ int am654_sdhci_init(struct am654_sdhci_plat *plat)
                        if (ret)
                                return ret;
                }
-
-               /* Configure DLL TRIM */
-               mask = DLL_TRIM_ICP_MASK;
-               val = plat->trm_icp << DLL_TRIM_ICP_SHIFT;
-
-               /* Configure DLL driver strength */
-               mask |= DR_TY_MASK;
-               val |= plat->drv_strength << DR_TY_SHIFT;
-               regmap_update_bits(plat->base, PHY_CTRL1, mask, val);
        }
 
        /* Enable pins by setting IO mux to 0 */
@@ -292,12 +293,13 @@ const struct sdhci_ops am654_sdhci_ops = {
 
 const struct am654_driver_data am654_drv_data = {
        .ops = &am654_sdhci_ops,
-       .flags = IOMUX_PRESENT | FREQSEL_2_BIT | DLL_PRESENT | STRBSEL_4_BIT,
+       .flags = IOMUX_PRESENT | FREQSEL_2_BIT | DLL_PRESENT | DLL_CALIB |
+                STRBSEL_4_BIT,
 };
 
 const struct am654_driver_data j721e_8bit_drv_data = {
        .ops = &am654_sdhci_ops,
-       .flags = DLL_PRESENT,
+       .flags = DLL_PRESENT | DLL_CALIB,
 };
 
 static int j721e_4bit_sdhci_set_ios_post(struct sdhci_host *host)
-- 
2.17.1

Reply via email to