>-----Original Message----- >From: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi- >powergrids.com> >Sent: Tuesday, January 19, 2021 4:11 PM >To: Priyanka Jain (OSS) <[email protected]>; [email protected] >Cc: Valentin Longchamp <[email protected]>; Holger >Brunck <[email protected]>; Rainer Boschung ><[email protected]>; Matteo Ghidoni ><[email protected]> >Subject: Subject: [PATCH v2 4/4] board/km: add support for seli8 design based >on >nxp ls102x > >The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and >FOX product lines. > >It is based on NXP LS1021 SoC and it provides following interfaces: > - IFC interface for NOR, NAND and external FPGA's > - 1 x RGMII ETH for debug purposes > - 2 x SGMII ETH for management communication via back-plane > - 1 x uQE HDLC for management communication via back-plane > - 1 x I2C for peripheral devices > - 1 x SPI for peripheral devices > - 1 x UART for debug logging > >It is foreseen that the design will be later re-used for another XMC and FOX >service cards with similar SoC requirements. > >Signed-off-by: Rainer Boschung <[email protected]> >Signed-off-by: Matteo Ghidoni <[email protected]> >Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi- >powergrids.com> >--- <snip> Kindly fix below checkpatch errors /warnings WARNING: 'AYSNC' may be misspelled - perhaps 'ASYNC'? #799: FILE: include/configs/km/pg-wcom-ls102xa.h:64: + CSOR_NOR_NOR_MODE_AYSNC_NOR | \
ERROR: All commands are managed by Kconfig #953: FILE: include/configs/km/pg-wcom-ls102xa.h:218: +#define CONFIG_CMDLINE_TAG total: 1 errors, 2 warnings, 0 checks, 964 lines checked Regards Priyanka
