On Mon, 8 Feb 2021 17:24:16 +0100 Stefan Roese <[email protected]> wrote: > Hi Marek, > > On 08.02.21 17:04, Marek Behún wrote: > > This syncs drivers/ddr/marvell/a38x/ with the mv-ddr-devel branch > > of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. > > Specifically this syncs with commit fae3f6c98230 ("Bump mv_ddr to > > release 14.0.0"). > > > > There is a new version numbering system, where after 18.12.0 came > > 1.0.0, 2.0.0, and so on until 14.0.0. So 14.0.0 is newer than 18.12.0. > > > > There are some commits regarding DDR3 on top of version 14.0.0 in the > > mv-ddr-marvell repository (from Chris Packham), but these changes > > already are in U-Boot. > > > > The complete log of changes is best obtained from the mv-ddr-marvell.git > > repository but some relevant highlights are: > > > > ddr3: allow board specific ODT configuration > > mv_ddr: add 16Gbit memory devices support > > mv_ddr: add support for twin-die combined memory device > > mv_ddr: a38x: disable WL phase correction stage in case of > > bus_width=16bit > > mv_ddr: a38x : fix memory cs size function > > Great, thanks for working on this. But can't you instead of sending this > one big patch not send a list of separate patches (list above etc)? This > would make it easier to see and review the changes and also would > preserve the authorship of the patches.
Very well, I shall try to do it that way. BTW I forgot to change the author (original author is Pali, I just updated the patch a little and rewrote the commit message).
