> -----Original Message----- > From: Prafulla Wadaskar [mailto:[email protected]] > Sent: Thursday, October 07, 2010 8:29 PM > To: [email protected] > Cc: Prabhanjan Sarnaik; Ashish Karkare; Prafulla Wadaskar > Subject: [PATCH V2 1/3] Kirkwood: dram_init is moved to dram.c > > For all Kirkwood boards so far dram_init function is duplicated > dram_init function is moved to dram.c and relevant code from all > board specific files removed > > If any board needs specific dram init handling than standard one, > then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in > board config header file and the dram_init function can be put > in board specific source file > For ex. keymile boards > > Signed-off-by: Prafulla Wadaskar <[email protected]> > --- > Changelog > v2: > dram_init only performed for consecutive memory > removed CONFIG_SYS_WITHOUT_RELOC dependency > dram_init_banksize added to avoid re-configuration of dram bank 0 > > arch/arm/cpu/arm926ejs/kirkwood/dram.c | 38 > +++++++++++++++++++++++ > board/Marvell/guruplug/guruplug.c | 11 ------ > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 11 ------ > board/Marvell/openrd_base/openrd_base.c | 11 ------ > board/Marvell/rd6281a/rd6281a.c | 11 ------ > board/Marvell/sheevaplug/sheevaplug.c | 11 ------ > include/configs/keymile-common.h | 1 + > 7 files changed, 39 insertions(+), 55 deletions(-) >
Applied to u-boot-marvell.git master branch Regards. Prafulla . . _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
