As there are now no boards for the MX23 family, remove the general support.
Cc: Stefano Babic <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP i.MX U-Boot Team <[email protected]> Signed-off-by: Tom Rini <[email protected]> --- arch/arm/Kconfig | 8 +- arch/arm/Makefile | 2 +- arch/arm/cpu/arm926ejs/mxs/Makefile | 1 - arch/arm/cpu/arm926ejs/mxs/clock.c | 31 +- arch/arm/cpu/arm926ejs/mxs/iomux.c | 7 +- .../cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg | 5 - arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 7 - arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 31 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 85 +---- arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 50 +-- arch/arm/cpu/arm926ejs/mxs/timer.c | 12 +- arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 18 - arch/arm/include/asm/arch-mxs/imx-regs.h | 5 - arch/arm/include/asm/arch-mxs/iomux-mx23.h | 349 ------------------ arch/arm/include/asm/arch-mxs/regs-base.h | 46 +-- .../include/asm/arch-mxs/regs-clkctrl-mx23.h | 209 ----------- .../include/asm/arch-mxs/regs-power-mx23.h | 344 ----------------- arch/arm/include/asm/arch-mxs/regs-ssp.h | 42 +-- arch/arm/include/asm/arch-mxs/regs-timrot.h | 97 +---- arch/arm/include/asm/arch-mxs/sys_proto.h | 17 +- arch/arm/include/asm/mach-imx/dma.h | 14 +- arch/arm/include/asm/mach-imx/regs-apbh.h | 115 +----- arch/arm/include/asm/mach-imx/regs-lcdif.h | 12 - arch/arm/mach-imx/mxs/Kconfig | 21 -- drivers/dma/apbh_dma.c | 5 +- drivers/gpio/mxs_gpio.c | 12 +- drivers/mmc/mxsmmc.c | 12 +- drivers/spi/mxs_spi.c | 9 +- include/configs/mxs.h | 14 +- tools/Makefile | 5 +- 30 files changed, 44 insertions(+), 1541 deletions(-) delete mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg delete mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg delete mode 100644 arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd delete mode 100644 arch/arm/include/asm/arch-mxs/iomux-mx23.h delete mode 100644 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h delete mode 100644 arch/arm/include/asm/arch-mxs/regs-power-mx23.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 95557d6ed6bd..f2a87c3caed8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -856,12 +856,6 @@ config ARCH_IMXRT select SUPPORT_SPL imply CMD_DM -config ARCH_MX23 - bool "NXP i.MX23 family" - select CPU_ARM926EJS - select PL011_SERIAL - select SUPPORT_SPL - config ARCH_MX25 bool "NXP MX25" select CPU_ARM926EJS @@ -2042,6 +2036,6 @@ source "arch/arm/Kconfig.debug" endmenu config SPL_LDSCRIPT - default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK + default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if ARCH_MX28 && !SPL_FRAMEWORK default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 28b523b37c70..7c1bca7f9269 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -107,7 +107,7 @@ libs-y += arch/arm/cpu/ libs-y += arch/arm/lib/ ifeq ($(CONFIG_SPL_BUILD),y) -ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m imx8 imxrt)) +ifneq (,$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m imx8 imxrt)) libs-y += arch/arm/mach-imx/ endif else diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile index f60e61e4343f..f846a5400a3d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/Makefile +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -12,7 +12,6 @@ obj-y += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o endif # Specify the target for use in elftosb call -MKIMAGE_TARGET-$(CONFIG_MX23) = mxsimage$(CONFIG_SPL_FRAMEWORK:%=-spl).mx23.cfg MKIMAGE_TARGET-$(CONFIG_MX28) = mxsimage$(CONFIG_SPL_FRAMEWORK:%=-spl).mx28.cfg # Generate HAB-capable IVT diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c index 4e1cf3a1e32b..9aa6f83bb395 100644 --- a/arch/arm/cpu/arm926ejs/mxs/clock.c +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -28,9 +28,7 @@ #define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000) #define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000) -#if defined(CONFIG_MX23) -#define MXC_SSPCLK_MAX MXC_SSPCLK0 -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define MXC_SSPCLK_MAX MXC_SSPCLK3 #endif @@ -113,10 +111,7 @@ static uint32_t mxs_get_gpmiclk(void) { struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; -#if defined(CONFIG_MX23) - uint8_t *reg = - &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) uint8_t *reg = &clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI]; #endif @@ -319,9 +314,7 @@ void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq) if (freq == 0) return; -#if defined(CONFIG_MX23) - writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr); -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr); #endif @@ -367,23 +360,7 @@ void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq) k_best /= 1000; -#if defined(CONFIG_MX23) - writeb(CLKCTRL_FRAC_CLKGATE, - &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]); - writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK), - &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]); - writeb(CLKCTRL_FRAC_CLKGATE, - &clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]); - - writel(CLKCTRL_PIX_CLKGATE, - &clkctrl_regs->hw_clkctrl_pix_set); - clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix, - CLKCTRL_PIX_DIV_MASK | CLKCTRL_PIX_CLKGATE, - k_best << CLKCTRL_PIX_DIV_OFFSET); - - while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY) - ; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) writeb(CLKCTRL_FRAC_CLKGATE, &clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]); writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK), diff --git a/arch/arm/cpu/arm926ejs/mxs/iomux.c b/arch/arm/cpu/arm926ejs/mxs/iomux.c index 381264b8a18d..d212d0fa529d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/iomux.c +++ b/arch/arm/cpu/arm926ejs/mxs/iomux.c @@ -13,14 +13,11 @@ #include <asm/arch/iomux.h> #include <asm/arch/imx-regs.h> -#if defined(CONFIG_MX23) -#define DRIVE_OFFSET 0x200 -#define PULL_OFFSET 0x400 -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define DRIVE_OFFSET 0x300 #define PULL_OFFSET 0x600 #else -#error "Please select CONFIG_MX23 or CONFIG_MX28" +#error "Please select CONFIG_MX28" #endif /* diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg deleted file mode 100644 index ab2183ed3795..000000000000 --- a/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg +++ /dev/null @@ -1,5 +0,0 @@ -DISPLAYPROGRESS -SECTION 0x0 BOOTABLE - TAG LAST - LOAD 0x1000 spl/u-boot-spl.bin - CALL 0x1000 0x0 diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg deleted file mode 100644 index e7028092a2c3..000000000000 --- a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg +++ /dev/null @@ -1,7 +0,0 @@ -DISPLAYPROGRESS -SECTION 0x0 BOOTABLE - TAG LAST - LOAD 0x1000 spl/u-boot-spl.bin - CALL 0x1000 0x0 - LOAD 0x40002000 u-boot.bin - CALL 0x40002000 0x0 diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index 1501d7df0dc6..d44167e4e90c 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -39,42 +39,13 @@ void early_delay(int delay) ; } -#if defined(CONFIG_MX23) -#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) -static const iomux_cfg_t iomux_boot[] = { - MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, - MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, - MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, - MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, - MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, - MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, -}; -#endif - static uint8_t mxs_get_bootmode_index(void) { uint8_t bootmode = 0; int i; uint8_t masked; -#if defined(CONFIG_MX23) - /* Setup IOMUX of bootmode pads to GPIO */ - mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot)); - - /* Setup bootmode pins as GPIO input */ - gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0); - gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1); - gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2); - gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3); - gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5); - - /* Read bootmode pads */ - bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; - bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; - bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; - bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; - bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) /* The global boot mode will be detected by ROM code and its value * is stored at the fixed address 0x00019BF0 in OCRAM. */ diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index a94803ee93d9..c56b620f1ffa 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -71,21 +71,6 @@ __weak uint32_t mxs_dram_vals[] = { 0x00040004, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0xffffffff -/* - * i.MX23 DDR at 133MHz - */ -#elif defined(CONFIG_MX23) - 0x01010001, 0x00010100, 0x01000101, 0x00000001, - 0x00000101, 0x00000000, 0x00010000, 0x01000001, - 0x00000000, 0x00000001, 0x07000200, 0x00070202, - 0x02020000, 0x04040a01, 0x00000201, 0x02040000, - 0x02000000, 0x19000f08, 0x0d0d0000, 0x02021313, - 0x02061521, 0x0000000a, 0x00080008, 0x00200020, - 0x00200020, 0x00200020, 0x000003f7, 0x00000000, - 0x00000000, 0x00000020, 0x00000020, 0x00c80000, - 0x000a23cd, 0x000000c8, 0x00006665, 0x00000000, - 0x00000101, 0x00040001, 0x00000000, 0x00000000, - 0x00010000 #else #error Unsupported memory initialization #endif @@ -144,10 +129,7 @@ static void mxs_mem_init_clock(void) { struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; -#if defined(CONFIG_MX23) - /* Fractional divider for ref_emi is 33 ; 480 * 18 / 33 = 266MHz */ - const unsigned char divider = 33; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) /* Fractional divider for ref_emi is 21 ; 480 * 18 / 21 = 411MHz */ const unsigned char divider = 21; #endif @@ -247,67 +229,6 @@ uint32_t mxs_mem_get_size(void) return sz; } -#ifdef CONFIG_MX23 -static void mx23_mem_setup_vddmem(void) -{ - struct mxs_power_regs *power_regs = - (struct mxs_power_regs *)MXS_POWER_BASE; - - debug("SPL: Setting mx23 VDDMEM\n"); - - /* We must wait before and after disabling the current limiter! */ - early_delay(10000); - - clrbits_le32(&power_regs->hw_power_vddmemctrl, - POWER_VDDMEMCTRL_ENABLE_ILIMIT); - - early_delay(10000); - -} - -static void mx23_mem_init(void) -{ - debug("SPL: Initialising mx23 SDRAM Controller\n"); - - /* - * Reset/ungate the EMI block. This is essential, otherwise the system - * suffers from memory instability. This thing is mx23 specific and is - * no longer present on mx28. - */ - mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE); - - mx23_mem_setup_vddmem(); - - /* - * Configure the DRAM registers - */ - - /* Clear START and SREFRESH bit from DRAM_CTL8 */ - clrbits_le32(MXS_DRAM_BASE + 0x20, (1 << 16) | (1 << 8)); - - initialize_dram_values(); - - /* Set START bit in DRAM_CTL8 */ - setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16); - - clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17); - - /* Wait for EMI_STAT bit DRAM_HALTED */ - for (;;) { - if (!(readl(MXS_EMI_BASE + 0x10) & (1 << 1))) - break; - early_delay(1000); - } - - /* Adjust EMI port priority. */ - clrsetbits_le32(0x80020000, 0x1f << 16, 0x2); - early_delay(20000); - - setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 19); - setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 11); -} -#endif - #ifdef CONFIG_MX28 static void mx28_mem_init(void) { @@ -349,9 +270,7 @@ void mxs_mem_init(void) mxs_mem_setup_vdda(); -#if defined(CONFIG_MX23) - mx23_mem_init(); -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) mx28_mem_init(); #endif diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 35ea71a5ba89..095ad9230fa8 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -939,13 +939,6 @@ static void mxs_power_configure_power_source(void) mxs_init_batt_bo(); mxs_switch_vddd_to_dcdc_source(); - -#ifdef CONFIG_MX23 - /* Fire up the VDDMEM LinReg now that we're all set. */ - debug("SPL: Enabling mx23 VDDMEM linear regulator\n"); - writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT, - &power_regs->hw_power_vddmemctrl); -#endif } /** @@ -1065,9 +1058,7 @@ struct mxs_vddx_cfg { static const struct mxs_vddx_cfg mxs_vddio_cfg = { .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> hw_power_vddioctrl), -#if defined(CONFIG_MX23) - .step_mV = 25, -#else +#if defined(CONFIG_MX28) .step_mV = 50, #endif .lowest_mV = 2800, @@ -1092,21 +1083,6 @@ static const struct mxs_vddx_cfg mxs_vddd_cfg = { .bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET, }; -#ifdef CONFIG_MX23 -static const struct mxs_vddx_cfg mxs_vddmem_cfg = { - .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> - hw_power_vddmemctrl), - .step_mV = 50, - .lowest_mV = 1700, - .powered_by_linreg = NULL, - .trg_mask = POWER_VDDMEMCTRL_TRG_MASK, - .bo_irq = 0, - .bo_enirq = 0, - .bo_offset_mask = 0, - .bo_offset_offset = 0, -}; -#endif - /** * mxs_power_set_vddx() - Configure voltage on DC-DC converter rail * @cfg: Configuration data of the DC-DC converter rail @@ -1210,24 +1186,6 @@ static void mxs_setup_batt_detect(void) early_delay(10); } -/** - * mxs_ungate_power() - Ungate the POWER block - * - * This function ungates clock to the power block. In case the power block - * was still gated at this point, it will not be possible to configure the - * block and therefore the power initialization would fail. This function - * is only needed on i.MX233, on i.MX28 the power block is always ungated. - */ -static void mxs_ungate_power(void) -{ -#ifdef CONFIG_MX23 - struct mxs_power_regs *power_regs = - (struct mxs_power_regs *)MXS_POWER_BASE; - - writel(POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr); -#endif -} - /** * mxs_power_init() - The power block init main function * @@ -1241,8 +1199,6 @@ void mxs_power_init(void) debug("SPL: Initialising Power Block\n"); - mxs_ungate_power(); - mxs_power_clock2xtal(); mxs_power_set_auto_restart(); mxs_power_set_linreg(); @@ -1258,10 +1214,6 @@ void mxs_power_init(void) debug("SPL: Setting VDDD to 1V55 (brownout @ 1v400)\n"); mxs_power_set_vddx(&mxs_vddd_cfg, 1550, 1400); -#ifdef CONFIG_MX23 - debug("SPL: Setting mx23 VDDMEM to 2V5 (brownout @ 1v7)\n"); - mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700); -#endif writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ | diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c index 5ab4ed0c5a3d..a5dd9a838e87 100644 --- a/arch/arm/cpu/arm926ejs/mxs/timer.c +++ b/arch/arm/cpu/arm926ejs/mxs/timer.c @@ -18,9 +18,7 @@ #include <linux/delay.h> /* Maximum fixed count */ -#if defined(CONFIG_MX23) -#define TIMER_LOAD_VAL 0xffff -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMER_LOAD_VAL 0xffffffff #endif @@ -59,9 +57,7 @@ int timer_init(void) mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); /* Set fixed_count to 0 */ -#if defined(CONFIG_MX23) - writel(0, &timrot_regs->hw_timrot_timcount0); -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) writel(0, &timrot_regs->hw_timrot_fixed_count0); #endif @@ -71,9 +67,7 @@ int timer_init(void) &timrot_regs->hw_timrot_timctrl0); /* Set fixed_count to maximal value */ -#if defined(CONFIG_MX23) - writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0); -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0); #endif diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd deleted file mode 100644 index 3a51879d5e4a..000000000000 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd +++ /dev/null @@ -1,18 +0,0 @@ -options { - driveTag = 0x00; - flags = 0x01; -} - -sources { - u_boot_spl="spl/u-boot-spl.bin"; - u_boot="u-boot.bin"; -} - -section (0) { - load u_boot_spl > 0x0000; - load ivt (entry = 0x0014) > 0x8000; - call 0x8000; - - load u_boot > 0x40000100; - call 0x40000100; -} diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h index f853c484be7d..c099c65c9608 100644 --- a/arch/arm/include/asm/arch-mxs/imx-regs.h +++ b/arch/arm/include/asm/arch-mxs/imx-regs.h @@ -25,11 +25,6 @@ #include <asm/arch/regs-usb.h> #include <asm/arch/regs-usbphy.h> -#ifdef CONFIG_MX23 -#include <asm/arch/regs-clkctrl-mx23.h> -#include <asm/arch/regs-power-mx23.h> -#endif - #ifdef CONFIG_MX28 #include <asm/arch/regs-clkctrl-mx28.h> #include <asm/arch/regs-power-mx28.h> diff --git a/arch/arm/include/asm/arch-mxs/iomux-mx23.h b/arch/arm/include/asm/arch-mxs/iomux-mx23.h deleted file mode 100644 index 2706efa750a2..000000000000 --- a/arch/arm/include/asm/arch-mxs/iomux-mx23.h +++ /dev/null @@ -1,349 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2009-2010 Amit Kucheria <[email protected]> - * Copyright (C) 2010 Freescale Semiconductor, Inc. - */ - -#ifndef __MACH_IOMUX_MX23_H__ -#define __MACH_IOMUX_MX23_H__ - -#include <asm/arch/iomux.h> - -/* - * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode> - * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> - * See also iomux.h - * - * BANK PIN MUX - */ -/* MUXSEL_0 */ -#define MX23_PAD_GPMI_D00__GPMI_D00 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D01__GPMI_D01 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D02__GPMI_D02 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D03__GPMI_D03 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D04__GPMI_D04 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D05__GPMI_D05 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D06__GPMI_D06 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D07__GPMI_D07 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D08__GPMI_D08 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D09__GPMI_D09 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D10__GPMI_D10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D11__GPMI_D11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D12__GPMI_D12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D13__GPMI_D13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D14__GPMI_D14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D15__GPMI_D15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_WPN__GPMI_WPN MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0) -#define MX23_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0) -#define MX23_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0) -#define MX23_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0) -#define MX23_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0) -#define MX23_PAD_I2C_SCL__I2C_SCL MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0) -#define MX23_PAD_I2C_SDA__I2C_SDA MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0) - -#define MX23_PAD_LCD_D00__LCD_D00 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D01__LCD_D01 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D02__LCD_D02 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D03__LCD_D03 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D04__LCD_D04 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D05__LCD_D05 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D06__LCD_D06 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D07__LCD_D07 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D08__LCD_D08 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D09__LCD_D09 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0) -#define MX23_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0) -#define MX23_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0) -#define MX23_PAD_LCD_WR__LCD_WR MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0) -#define MX23_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0) -#define MX23_PAD_LCD_DOTCK__LCD_DOTCK MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0) -#define MX23_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0) -#define MX23_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0) -#define MX23_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0) -#define MX23_PAD_PWM0__PWM0 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0) -#define MX23_PAD_PWM1__PWM1 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0) -#define MX23_PAD_PWM2__PWM2 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0) -#define MX23_PAD_PWM3__PWM3 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0) -#define MX23_PAD_PWM4__PWM4 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0) - -#define MX23_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DETECT__SSP1_DETECT MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0) -#define MX23_PAD_ROTARYA__ROTARYA MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0) -#define MX23_PAD_ROTARYB__ROTARYB MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A00__EMI_A00 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A01__EMI_A01 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A02__EMI_A02 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A03__EMI_A03 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A04__EMI_A04 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A05__EMI_A05 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A06__EMI_A06 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A07__EMI_A07 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A08__EMI_A08 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A09__EMI_A09 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A10__EMI_A10 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A11__EMI_A11 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A12__EMI_A12 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0) -#define MX23_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0) -#define MX23_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0) -#define MX23_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0) -#define MX23_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0) - -#define MX23_PAD_EMI_D00__EMI_D00 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D01__EMI_D01 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D02__EMI_D02 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D03__EMI_D03 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D04__EMI_D04 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D05__EMI_D05 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D06__EMI_D06 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D07__EMI_D07 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D08__EMI_D08 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D09__EMI_D09 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D10__EMI_D10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D11__EMI_D11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D12__EMI_D12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D13__EMI_D13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D14__EMI_D14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D15__EMI_D15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0) -#define MX23_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0) -#define MX23_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0) -#define MX23_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0) -#define MX23_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CLKN__EMI_CLKN MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0) - -/* MUXSEL_1 */ -#define MX23_PAD_GPMI_D00__LCD_D8 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D01__LCD_D9 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D02__LCD_D10 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D03__LCD_D11 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D04__LCD_D12 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D05__LCD_D13 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D06__LCD_D14 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D07__LCD_D15 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D08__LCD_D18 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D09__LCD_D19 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D10__LCD_D20 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D11__LCD_D21 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D12__LCD_D22 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D13__LCD_D23 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D14__AUART2_RX MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D15__AUART2_TX MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_CLE__LCD_D16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_ALE__LCD_D17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_CE2N__ATA_A2 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1) -#define MX23_PAD_AUART1_RTS__IR_CLK MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1) -#define MX23_PAD_AUART1_RX__IR_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1) -#define MX23_PAD_AUART1_TX__IR_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1) -#define MX23_PAD_I2C_SCL__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1) -#define MX23_PAD_I2C_SDA__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1) - -#define MX23_PAD_LCD_D00__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D01__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D02__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D03__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D04__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D05__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D06__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D07__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D08__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D09__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D10__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D11__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D12__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D13__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D14__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D15__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1) -#define MX23_PAD_LCD_RESET__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1) -#define MX23_PAD_LCD_RS__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1) -#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1) -#define MX23_PAD_LCD_ENABLE__I2C_SCL MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1) -#define MX23_PAD_LCD_HSYNC__I2C_SDA MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1) -#define MX23_PAD_LCD_VSYNC__LCD_BUSY MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1) -#define MX23_PAD_PWM0__ROTARYA MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1) -#define MX23_PAD_PWM1__ROTARYB MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1) -#define MX23_PAD_PWM2__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1) -#define MX23_PAD_PWM3__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1) -#define MX23_PAD_PWM4__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1) - -#define MX23_PAD_SSP1_DETECT__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_1) -#define MX23_PAD_SSP1_DATA1__I2C_SCL MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_1) -#define MX23_PAD_SSP1_DATA2__I2C_SDA MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1) -#define MX23_PAD_ROTARYA__AUART2_RTS MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1) -#define MX23_PAD_ROTARYB__AUART2_CTS MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_1) - -/* MUXSEL_2 */ -#define MX23_PAD_GPMI_D00__SSP2_DATA0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D01__SSP2_DATA1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D02__SSP2_DATA2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D03__SSP2_DATA3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D04__SSP2_DATA4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D05__SSP2_DATA5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D06__SSP2_DATA6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D07__SSP2_DATA7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D08__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D09__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D10__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D11__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D15__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_RDY0__SSP2_DETECT MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_RDY1__SSP2_CMD MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_WRN__SSP2_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2) -#define MX23_PAD_AUART1_CTS__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2) -#define MX23_PAD_AUART1_RTS__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2) -#define MX23_PAD_AUART1_RX__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2) -#define MX23_PAD_AUART1_TX__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2) -#define MX23_PAD_I2C_SCL__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2) -#define MX23_PAD_I2C_SDA__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2) - -#define MX23_PAD_LCD_D08__SAIF2_SDATA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D09__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D11__SAIF_LRCLK MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D12__SAIF2_SDATA1 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D13__SAIF2_SDATA2 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D14__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D15__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2) -#define MX23_PAD_LCD_RESET__GPMI_CE3N MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2) -#define MX23_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2) -#define MX23_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2) -#define MX23_PAD_PWM3__AUART1_CTS MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2) -#define MX23_PAD_PWM4__AUART1_RTS MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2) - -#define MX23_PAD_SSP1_CMD__JTAG_TDO MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DETECT__USB_OTG_ID MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DATA0__JTAG_TDI MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DATA1__JTAG_TCLK MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DATA2__JTAG_RTCK MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DATA3__JTAG_TMS MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_SCK__JTAG_TRST MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_2) -#define MX23_PAD_ROTARYA__SPDIF MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_2) -#define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2) - -/* MUXSEL_GPIO */ -#define MX23_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D08__GPIO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D09__GPIO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D10__GPIO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D11__GPIO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D12__GPIO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D13__GPIO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D14__GPIO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D15__GPIO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CLE__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_ALE__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY0__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY1__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY2__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY3__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_WPN__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_WRN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_CTS__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_RTS__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_RX__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_TX__GPIO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_I2C_SCL__GPIO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_I2C_SDA__GPIO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO) - -#define MX23_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_RESET__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_RS__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_WR__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_CS__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_DOTCK__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_ENABLE__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_HSYNC__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_VSYNC__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM0__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM1__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM2__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM3__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM4__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) - -#define MX23_PAD_SSP1_CMD__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DETECT__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA0__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA1__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA2__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA3__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_SCK__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_ROTARYA__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_ROTARYB__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A00__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A01__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A02__GPIO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A03__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A04__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A05__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A06__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A07__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A08__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A09__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A10__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A11__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A12__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_BA0__GPIO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_BA1__GPIO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CASN__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CE0N__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CE1N__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE1N__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE0N__GPIO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CKE__GPIO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_RASN__GPIO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_WEN__GPIO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO) - -#endif /* __MACH_IOMUX_MX23_H__ */ diff --git a/arch/arm/include/asm/arch-mxs/regs-base.h b/arch/arm/include/asm/arch-mxs/regs-base.h index 44d40cade879..c016d1b25534 100644 --- a/arch/arm/include/asm/arch-mxs/regs-base.h +++ b/arch/arm/include/asm/arch-mxs/regs-base.h @@ -14,52 +14,10 @@ #ifndef __MXS_REGS_BASE_H__ #define __MXS_REGS_BASE_H__ -/* - * Register base addresses for i.MX23 - */ -#if defined(CONFIG_MX23) -#define MXS_ICOLL_BASE 0x80000000 -#define MXS_APBH_BASE 0x80004000 -#define MXS_ECC8_BASE 0x80008000 -#define MXS_BCH_BASE 0x8000A000 -#define MXS_GPMI_BASE 0x8000C000 -#define MXS_SSP0_BASE 0x80010000 -#define MXS_SSP1_BASE 0x80034000 -#define MXS_ETM_BASE 0x80014000 -#define MXS_PINCTRL_BASE 0x80018000 -#define MXS_DIGCTL_BASE 0x8001C000 -#define MXS_EMI_BASE 0x80020000 -#define MXS_APBX_BASE 0x80024000 -#define MXS_DCP_BASE 0x80028000 -#define MXS_PXP_BASE 0x8002A000 -#define MXS_OCOTP_BASE 0x8002C000 -#define MXS_AXI_BASE 0x8002E000 -#define MXS_LCDIF_BASE 0x80030000 -#define MXS_SSP1_BASE 0x80034000 -#define MXS_TVENC_BASE 0x80038000 -#define MXS_CLKCTRL_BASE 0x80040000 -#define MXS_SAIF0_BASE 0x80042000 -#define MXS_POWER_BASE 0x80044000 -#define MXS_SAIF1_BASE 0x80046000 -#define MXS_AUDIOOUT_BASE 0x80048000 -#define MXS_AUDIOIN_BASE 0x8004C000 -#define MXS_LRADC_BASE 0x80050000 -#define MXS_SPDIF_BASE 0x80054000 -#define MXS_I2C0_BASE 0x80058000 -#define MXS_RTC_BASE 0x8005C000 -#define MXS_PWM_BASE 0x80064000 -#define MXS_TIMROT_BASE 0x80068000 -#define MXS_UARTAPP0_BASE 0x8006C000 -#define MXS_UARTAPP1_BASE 0x8006E000 -#define MXS_UARTDBG_BASE 0x80070000 -#define MXS_USBPHY0_BASE 0x8007C000 -#define MXS_USBCTRL0_BASE 0x80080000 -#define MXS_DRAM_BASE 0x800E0000 - /* * Register base addresses for i.MX28 */ -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define MXS_ICOL_BASE 0x80000000 #define MXS_HSADC_BASE 0x80002000 #define MXS_APBH_BASE 0x80004000 @@ -114,7 +72,7 @@ #define MXS_ENET0_BASE 0x800F0000 #define MXS_ENET1_BASE 0x800F4000 #else -#error Unkown SoC. Please set CONFIG_MX23 or CONFIG_MX28 +#error Unkown SoC. Please set CONFIG_MX28 #endif #endif /* __MXS_REGS_BASE_H__ */ diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h deleted file mode 100644 index 50fdc9cd0326..000000000000 --- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h +++ /dev/null @@ -1,209 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Freescale i.MX23 CLKCTRL Register Definitions - * - * Copyright (C) 2012 Marek Vasut <[email protected]> - * on behalf of DENX Software Engineering GmbH - * - * Based on code from LTIB: - * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -#ifndef __MX23_REGS_CLKCTRL_H__ -#define __MX23_REGS_CLKCTRL_H__ - -#include <asm/mach-imx/regs-common.h> - -#ifndef __ASSEMBLY__ -struct mxs_clkctrl_regs { - mxs_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */ - uint32_t hw_clkctrl_pll0ctrl1; /* 0x10 */ - uint32_t reserved_pll0ctrl1[3]; /* 0x14-0x1c */ - mxs_reg_32(hw_clkctrl_cpu) /* 0x20 */ - mxs_reg_32(hw_clkctrl_hbus) /* 0x30 */ - mxs_reg_32(hw_clkctrl_xbus) /* 0x40 */ - mxs_reg_32(hw_clkctrl_xtal) /* 0x50 */ - mxs_reg_32(hw_clkctrl_pix) /* 0x60 */ - uint32_t hw_clkctrl_ssp0; /* 0x70 */ - uint32_t reserved_ssp0[3]; /* 0x74-0x7c */ - uint32_t hw_clkctrl_gpmi; /* 0x80 */ - uint32_t reserved_gpmi[3]; /* 0x84-0x8c */ - mxs_reg_32(hw_clkctrl_spdif) /* 0x90 */ - mxs_reg_32(hw_clkctrl_emi) /* 0xa0 */ - - uint32_t reserved1[4]; - - mxs_reg_32(hw_clkctrl_saif0) /* 0xc0 */ - mxs_reg_32(hw_clkctrl_tv) /* 0xd0 */ - mxs_reg_32(hw_clkctrl_etm) /* 0xe0 */ - mxs_reg_8(hw_clkctrl_frac0) /* 0xf0 */ - mxs_reg_8(hw_clkctrl_frac1) /* 0x100 */ - mxs_reg_32(hw_clkctrl_clkseq) /* 0x110 */ - mxs_reg_32(hw_clkctrl_reset) /* 0x120 */ - mxs_reg_32(hw_clkctrl_status) /* 0x130 */ - mxs_reg_32(hw_clkctrl_version) /* 0x140 */ -}; -#endif - -#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28) -#define CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET 28 -#define CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT (0x0 << 28) -#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2 (0x1 << 28) -#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05 (0x2 << 28) -#define CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED (0x3 << 28) -#define CLKCTRL_PLL0CTRL0_CP_SEL_MASK (0x3 << 24) -#define CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET 24 -#define CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT (0x0 << 24) -#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2 (0x1 << 24) -#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05 (0x2 << 24) -#define CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED (0x3 << 24) -#define CLKCTRL_PLL0CTRL0_DIV_SEL_MASK (0x3 << 20) -#define CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET 20 -#define CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT (0x0 << 20) -#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER (0x1 << 20) -#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST (0x2 << 20) -#define CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED (0x3 << 20) -#define CLKCTRL_PLL0CTRL0_EN_USB_CLKS (1 << 18) -#define CLKCTRL_PLL0CTRL0_POWER (1 << 16) - -#define CLKCTRL_PLL0CTRL1_LOCK (1 << 31) -#define CLKCTRL_PLL0CTRL1_FORCE_LOCK (1 << 30) -#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK 0xffff -#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET 0 - -#define CLKCTRL_CPU_BUSY_REF_XTAL (1 << 29) -#define CLKCTRL_CPU_BUSY_REF_CPU (1 << 28) -#define CLKCTRL_CPU_DIV_XTAL_FRAC_EN (1 << 26) -#define CLKCTRL_CPU_DIV_XTAL_MASK (0x3ff << 16) -#define CLKCTRL_CPU_DIV_XTAL_OFFSET 16 -#define CLKCTRL_CPU_INTERRUPT_WAIT (1 << 12) -#define CLKCTRL_CPU_DIV_CPU_FRAC_EN (1 << 10) -#define CLKCTRL_CPU_DIV_CPU_MASK 0x3f -#define CLKCTRL_CPU_DIV_CPU_OFFSET 0 - -#define CLKCTRL_HBUS_BUSY (1 << 29) -#define CLKCTRL_HBUS_DCP_AS_ENABLE (1 << 28) -#define CLKCTRL_HBUS_PXP_AS_ENABLE (1 << 27) -#define CLKCTRL_HBUS_APBHDMA_AS_ENABLE (1 << 26) -#define CLKCTRL_HBUS_APBXDMA_AS_ENABLE (1 << 25) -#define CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE (1 << 24) -#define CLKCTRL_HBUS_TRAFFIC_AS_ENABLE (1 << 23) -#define CLKCTRL_HBUS_CPU_DATA_AS_ENABLE (1 << 22) -#define CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE (1 << 21) -#define CLKCTRL_HBUS_AUTO_SLOW_MODE (1 << 20) -#define CLKCTRL_HBUS_SLOW_DIV_MASK (0x7 << 16) -#define CLKCTRL_HBUS_SLOW_DIV_OFFSET 16 -#define CLKCTRL_HBUS_SLOW_DIV_BY1 (0x0 << 16) -#define CLKCTRL_HBUS_SLOW_DIV_BY2 (0x1 << 16) -#define CLKCTRL_HBUS_SLOW_DIV_BY4 (0x2 << 16) -#define CLKCTRL_HBUS_SLOW_DIV_BY8 (0x3 << 16) -#define CLKCTRL_HBUS_SLOW_DIV_BY16 (0x4 << 16) -#define CLKCTRL_HBUS_SLOW_DIV_BY32 (0x5 << 16) -#define CLKCTRL_HBUS_DIV_FRAC_EN (1 << 5) -#define CLKCTRL_HBUS_DIV_MASK 0x1f -#define CLKCTRL_HBUS_DIV_OFFSET 0 - -#define CLKCTRL_XBUS_BUSY (1 << 31) -#define CLKCTRL_XBUS_DIV_FRAC_EN (1 << 10) -#define CLKCTRL_XBUS_DIV_MASK 0x3ff -#define CLKCTRL_XBUS_DIV_OFFSET 0 - -#define CLKCTRL_XTAL_UART_CLK_GATE (1 << 31) -#define CLKCTRL_XTAL_FILT_CLK24M_GATE (1 << 30) -#define CLKCTRL_XTAL_PWM_CLK24M_GATE (1 << 29) -#define CLKCTRL_XTAL_DRI_CLK24M_GATE (1 << 28) -#define CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE (1 << 27) -#define CLKCTRL_XTAL_TIMROT_CLK32K_GATE (1 << 26) -#define CLKCTRL_XTAL_DIV_UART_MASK 0x3 -#define CLKCTRL_XTAL_DIV_UART_OFFSET 0 - -#define CLKCTRL_PIX_CLKGATE (1 << 31) -#define CLKCTRL_PIX_BUSY (1 << 29) -#define CLKCTRL_PIX_DIV_FRAC_EN (1 << 12) -#define CLKCTRL_PIX_DIV_MASK 0xfff -#define CLKCTRL_PIX_DIV_OFFSET 0 - -#define CLKCTRL_SSP_CLKGATE (1 << 31) -#define CLKCTRL_SSP_BUSY (1 << 29) -#define CLKCTRL_SSP_DIV_FRAC_EN (1 << 9) -#define CLKCTRL_SSP_DIV_MASK 0x1ff -#define CLKCTRL_SSP_DIV_OFFSET 0 - -#define CLKCTRL_GPMI_CLKGATE (1 << 31) -#define CLKCTRL_GPMI_BUSY (1 << 29) -#define CLKCTRL_GPMI_DIV_FRAC_EN (1 << 10) -#define CLKCTRL_GPMI_DIV_MASK 0x3ff -#define CLKCTRL_GPMI_DIV_OFFSET 0 - -#define CLKCTRL_SPDIF_CLKGATE (1 << 31) - -#define CLKCTRL_EMI_CLKGATE (1 << 31) -#define CLKCTRL_EMI_SYNC_MODE_EN (1 << 30) -#define CLKCTRL_EMI_BUSY_REF_XTAL (1 << 29) -#define CLKCTRL_EMI_BUSY_REF_EMI (1 << 28) -#define CLKCTRL_EMI_BUSY_REF_CPU (1 << 27) -#define CLKCTRL_EMI_BUSY_SYNC_MODE (1 << 26) -#define CLKCTRL_EMI_BUSY_DCC_RESYNC (1 << 17) -#define CLKCTRL_EMI_DCC_RESYNC_ENABLE (1 << 16) -#define CLKCTRL_EMI_DIV_XTAL_MASK (0xf << 8) -#define CLKCTRL_EMI_DIV_XTAL_OFFSET 8 -#define CLKCTRL_EMI_DIV_EMI_MASK 0x3f -#define CLKCTRL_EMI_DIV_EMI_OFFSET 0 - -#define CLKCTRL_IR_CLKGATE (1 << 31) -#define CLKCTRL_IR_AUTO_DIV (1 << 29) -#define CLKCTRL_IR_IR_BUSY (1 << 28) -#define CLKCTRL_IR_IROV_BUSY (1 << 27) -#define CLKCTRL_IR_IROV_DIV_MASK (0x1ff << 16) -#define CLKCTRL_IR_IROV_DIV_OFFSET 16 -#define CLKCTRL_IR_IR_DIV_MASK 0x3ff -#define CLKCTRL_IR_IR_DIV_OFFSET 0 - -#define CLKCTRL_SAIF0_CLKGATE (1 << 31) -#define CLKCTRL_SAIF0_BUSY (1 << 29) -#define CLKCTRL_SAIF0_DIV_FRAC_EN (1 << 16) -#define CLKCTRL_SAIF0_DIV_MASK 0xffff -#define CLKCTRL_SAIF0_DIV_OFFSET 0 - -#define CLKCTRL_TV_CLK_TV108M_GATE (1 << 31) -#define CLKCTRL_TV_CLK_TV_GATE (1 << 30) - -#define CLKCTRL_ETM_CLKGATE (1 << 31) -#define CLKCTRL_ETM_BUSY (1 << 29) -#define CLKCTRL_ETM_DIV_FRAC_EN (1 << 6) -#define CLKCTRL_ETM_DIV_MASK 0x3f -#define CLKCTRL_ETM_DIV_OFFSET 0 - -#define CLKCTRL_FRAC_CLKGATE (1 << 7) -#define CLKCTRL_FRAC_STABLE (1 << 6) -#define CLKCTRL_FRAC_FRAC_MASK 0x3f -#define CLKCTRL_FRAC_FRAC_OFFSET 0 -#define CLKCTRL_FRAC0_CPU 0 -#define CLKCTRL_FRAC0_EMI 1 -#define CLKCTRL_FRAC0_PIX 2 -#define CLKCTRL_FRAC0_IO0 3 -#define CLKCTRL_FRAC1_VID 3 - -#define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8) -#define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 7) -#define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 6) -#define CLKCTRL_CLKSEQ_BYPASS_SSP0 (1 << 5) -#define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 4) -#define CLKCTRL_CLKSEQ_BYPASS_IR (1 << 3) -#define CLKCTRL_CLKSEQ_BYPASS_PIX (1 << 1) -#define CLKCTRL_CLKSEQ_BYPASS_SAIF (1 << 0) - -#define CLKCTRL_RESET_CHIP (1 << 1) -#define CLKCTRL_RESET_DIG (1 << 0) - -#define CLKCTRL_STATUS_CPU_LIMIT_MASK (0x3 << 30) -#define CLKCTRL_STATUS_CPU_LIMIT_OFFSET 30 - -#define CLKCTRL_VERSION_MAJOR_MASK (0xff << 24) -#define CLKCTRL_VERSION_MAJOR_OFFSET 24 -#define CLKCTRL_VERSION_MINOR_MASK (0xff << 16) -#define CLKCTRL_VERSION_MINOR_OFFSET 16 -#define CLKCTRL_VERSION_STEP_MASK 0xffff -#define CLKCTRL_VERSION_STEP_OFFSET 0 - -#endif /* __MX23_REGS_CLKCTRL_H__ */ diff --git a/arch/arm/include/asm/arch-mxs/regs-power-mx23.h b/arch/arm/include/asm/arch-mxs/regs-power-mx23.h deleted file mode 100644 index a0dc78102301..000000000000 --- a/arch/arm/include/asm/arch-mxs/regs-power-mx23.h +++ /dev/null @@ -1,344 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Freescale i.MX23 Power Controller Register Definitions - * - * Copyright (C) 2012 Marek Vasut <[email protected]> - */ - -#ifndef __MX23_REGS_POWER_H__ -#define __MX23_REGS_POWER_H__ - -#include <asm/mach-imx/regs-common.h> - -#ifndef __ASSEMBLY__ -struct mxs_power_regs { - mxs_reg_32(hw_power_ctrl) - mxs_reg_32(hw_power_5vctrl) - mxs_reg_32(hw_power_minpwr) - mxs_reg_32(hw_power_charge) - uint32_t hw_power_vdddctrl; - uint32_t reserved_vddd[3]; - uint32_t hw_power_vddactrl; - uint32_t reserved_vdda[3]; - uint32_t hw_power_vddioctrl; - uint32_t reserved_vddio[3]; - uint32_t hw_power_vddmemctrl; - uint32_t reserved_vddmem[3]; - uint32_t hw_power_dcdc4p2; - uint32_t reserved_dcdc4p2[3]; - uint32_t hw_power_misc; - uint32_t reserved_misc[3]; - uint32_t hw_power_dclimits; - uint32_t reserved_dclimits[3]; - mxs_reg_32(hw_power_loopctrl) - uint32_t hw_power_sts; - uint32_t reserved_sts[3]; - mxs_reg_32(hw_power_speed) - uint32_t hw_power_battmonitor; - uint32_t reserved_battmonitor[3]; - - uint32_t reserved1[4]; - - mxs_reg_32(hw_power_reset) - - uint32_t reserved2[4]; - - mxs_reg_32(hw_power_special) - mxs_reg_32(hw_power_version) -}; -#endif - -#define POWER_CTRL_CLKGATE (1 << 30) -#define POWER_CTRL_PSWITCH_MID_TRAN (1 << 27) -#define POWER_CTRL_DCDC4P2_BO_IRQ (1 << 24) -#define POWER_CTRL_ENIRQ_DCDC4P2_BO (1 << 23) -#define POWER_CTRL_VDD5V_DROOP_IRQ (1 << 22) -#define POWER_CTRL_ENIRQ_VDD5V_DROOP (1 << 21) -#define POWER_CTRL_PSWITCH_IRQ (1 << 20) -#define POWER_CTRL_PSWITCH_IRQ_SRC (1 << 19) -#define POWER_CTRL_POLARITY_PSWITCH (1 << 18) -#define POWER_CTRL_ENIRQ_PSWITCH (1 << 17) -#define POWER_CTRL_POLARITY_DC_OK (1 << 16) -#define POWER_CTRL_DC_OK_IRQ (1 << 15) -#define POWER_CTRL_ENIRQ_DC_OK (1 << 14) -#define POWER_CTRL_BATT_BO_IRQ (1 << 13) -#define POWER_CTRL_ENIRQ_BATT_BO (1 << 12) -#define POWER_CTRL_VDDIO_BO_IRQ (1 << 11) -#define POWER_CTRL_ENIRQ_VDDIO_BO (1 << 10) -#define POWER_CTRL_VDDA_BO_IRQ (1 << 9) -#define POWER_CTRL_ENIRQ_VDDA_BO (1 << 8) -#define POWER_CTRL_VDDD_BO_IRQ (1 << 7) -#define POWER_CTRL_ENIRQ_VDDD_BO (1 << 6) -#define POWER_CTRL_POLARITY_VBUSVALID (1 << 5) -#define POWER_CTRL_VBUS_VALID_IRQ (1 << 4) -#define POWER_CTRL_ENIRQ_VBUS_VALID (1 << 3) -#define POWER_CTRL_POLARITY_VDD5V_GT_VDDIO (1 << 2) -#define POWER_CTRL_VDD5V_GT_VDDIO_IRQ (1 << 1) -#define POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO (1 << 0) - -#define POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 28) -#define POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 28 -#define POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 28) -#define POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 28) -#define POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 28) -#define POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 28) -#define POWER_5VCTRL_HEADROOM_ADJ_MASK (0x7 << 24) -#define POWER_5VCTRL_HEADROOM_ADJ_OFFSET 24 -#define POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x1 << 20) -#define POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET 20 -#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK (0x3f << 12) -#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET 12 -#define POWER_5VCTRL_VBUSVALID_TRSH_MASK (0x7 << 8) -#define POWER_5VCTRL_VBUSVALID_TRSH_OFFSET 8 -#define POWER_5VCTRL_VBUSVALID_TRSH_2V9 (0x0 << 8) -#define POWER_5VCTRL_VBUSVALID_TRSH_4V0 (0x1 << 8) -#define POWER_5VCTRL_VBUSVALID_TRSH_4V1 (0x2 << 8) -#define POWER_5VCTRL_VBUSVALID_TRSH_4V2 (0x3 << 8) -#define POWER_5VCTRL_VBUSVALID_TRSH_4V3 (0x4 << 8) -#define POWER_5VCTRL_VBUSVALID_TRSH_4V4 (0x5 << 8) -#define POWER_5VCTRL_VBUSVALID_TRSH_4V5 (0x6 << 8) -#define POWER_5VCTRL_VBUSVALID_TRSH_4V6 (0x7 << 8) -#define POWER_5VCTRL_PWDN_5VBRNOUT (1 << 7) -#define POWER_5VCTRL_ENABLE_LINREG_ILIMIT (1 << 6) -#define POWER_5VCTRL_DCDC_XFER (1 << 5) -#define POWER_5VCTRL_VBUSVALID_5VDETECT (1 << 4) -#define POWER_5VCTRL_VBUSVALID_TO_B (1 << 3) -#define POWER_5VCTRL_ILIMIT_EQ_ZERO (1 << 2) -#define POWER_5VCTRL_PWRUP_VBUS_CMPS (1 << 1) -#define POWER_5VCTRL_ENABLE_DCDC (1 << 0) - -#define POWER_MINPWR_LOWPWR_4P2 (1 << 14) -#define POWER_MINPWR_VDAC_DUMP_CTRL (1 << 13) -#define POWER_MINPWR_PWD_BO (1 << 12) -#define POWER_MINPWR_USE_VDDXTAL_VBG (1 << 11) -#define POWER_MINPWR_PWD_ANA_CMPS (1 << 10) -#define POWER_MINPWR_ENABLE_OSC (1 << 9) -#define POWER_MINPWR_SELECT_OSC (1 << 8) -#define POWER_MINPWR_VBG_OFF (1 << 7) -#define POWER_MINPWR_DOUBLE_FETS (1 << 6) -#define POWER_MINPWR_HALFFETS (1 << 5) -#define POWER_MINPWR_LESSANA_I (1 << 4) -#define POWER_MINPWR_PWD_XTAL24 (1 << 3) -#define POWER_MINPWR_DC_STOPCLK (1 << 2) -#define POWER_MINPWR_EN_DC_PFM (1 << 1) -#define POWER_MINPWR_DC_HALFCLK (1 << 0) - -#define POWER_CHARGE_ADJ_VOLT_MASK (0x7 << 24) -#define POWER_CHARGE_ADJ_VOLT_OFFSET 24 -#define POWER_CHARGE_ADJ_VOLT_M025P (0x1 << 24) -#define POWER_CHARGE_ADJ_VOLT_P050P (0x2 << 24) -#define POWER_CHARGE_ADJ_VOLT_M075P (0x3 << 24) -#define POWER_CHARGE_ADJ_VOLT_P025P (0x4 << 24) -#define POWER_CHARGE_ADJ_VOLT_M050P (0x5 << 24) -#define POWER_CHARGE_ADJ_VOLT_P075P (0x6 << 24) -#define POWER_CHARGE_ADJ_VOLT_M100P (0x7 << 24) -#define POWER_CHARGE_ENABLE_LOAD (1 << 22) -#define POWER_CHARGE_ENABLE_CHARGER_RESISTORS (1 << 21) -#define POWER_CHARGE_ENABLE_FAULT_DETECT (1 << 20) -#define POWER_CHARGE_CHRG_STS_OFF (1 << 19) -#define POWER_CHARGE_USE_EXTERN_R (1 << 17) -#define POWER_CHARGE_PWD_BATTCHRG (1 << 16) -#define POWER_CHARGE_STOP_ILIMIT_MASK (0xf << 8) -#define POWER_CHARGE_STOP_ILIMIT_OFFSET 8 -#define POWER_CHARGE_STOP_ILIMIT_10MA (0x1 << 8) -#define POWER_CHARGE_STOP_ILIMIT_20MA (0x2 << 8) -#define POWER_CHARGE_STOP_ILIMIT_50MA (0x4 << 8) -#define POWER_CHARGE_STOP_ILIMIT_100MA (0x8 << 8) -#define POWER_CHARGE_BATTCHRG_I_MASK 0x3f -#define POWER_CHARGE_BATTCHRG_I_OFFSET 0 -#define POWER_CHARGE_BATTCHRG_I_10MA 0x01 -#define POWER_CHARGE_BATTCHRG_I_20MA 0x02 -#define POWER_CHARGE_BATTCHRG_I_50MA 0x04 -#define POWER_CHARGE_BATTCHRG_I_100MA 0x08 -#define POWER_CHARGE_BATTCHRG_I_200MA 0x10 -#define POWER_CHARGE_BATTCHRG_I_400MA 0x20 - -#define POWER_VDDDCTRL_ADJTN_MASK (0xf << 28) -#define POWER_VDDDCTRL_ADJTN_OFFSET 28 -#define POWER_VDDDCTRL_PWDN_BRNOUT (1 << 23) -#define POWER_VDDDCTRL_DISABLE_STEPPING (1 << 22) -#define POWER_VDDDCTRL_ENABLE_LINREG (1 << 21) -#define POWER_VDDDCTRL_DISABLE_FET (1 << 20) -#define POWER_VDDDCTRL_LINREG_OFFSET_MASK (0x3 << 16) -#define POWER_VDDDCTRL_LINREG_OFFSET_OFFSET 16 -#define POWER_VDDDCTRL_LINREG_OFFSET_0STEPS (0x0 << 16) -#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 16) -#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 16) -#define POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 16) -#define POWER_VDDDCTRL_BO_OFFSET_MASK (0x7 << 8) -#define POWER_VDDDCTRL_BO_OFFSET_OFFSET 8 -#define POWER_VDDDCTRL_TRG_MASK 0x1f -#define POWER_VDDDCTRL_TRG_OFFSET 0 - -#define POWER_VDDACTRL_PWDN_BRNOUT (1 << 19) -#define POWER_VDDACTRL_DISABLE_STEPPING (1 << 18) -#define POWER_VDDACTRL_ENABLE_LINREG (1 << 17) -#define POWER_VDDACTRL_DISABLE_FET (1 << 16) -#define POWER_VDDACTRL_LINREG_OFFSET_MASK (0x3 << 12) -#define POWER_VDDACTRL_LINREG_OFFSET_OFFSET 12 -#define POWER_VDDACTRL_LINREG_OFFSET_0STEPS (0x0 << 12) -#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12) -#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12) -#define POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12) -#define POWER_VDDACTRL_BO_OFFSET_MASK (0x7 << 8) -#define POWER_VDDACTRL_BO_OFFSET_OFFSET 8 -#define POWER_VDDACTRL_TRG_MASK 0x1f -#define POWER_VDDACTRL_TRG_OFFSET 0 - -#define POWER_VDDIOCTRL_ADJTN_MASK (0xf << 20) -#define POWER_VDDIOCTRL_ADJTN_OFFSET 20 -#define POWER_VDDIOCTRL_PWDN_BRNOUT (1 << 18) -#define POWER_VDDIOCTRL_DISABLE_STEPPING (1 << 17) -#define POWER_VDDIOCTRL_DISABLE_FET (1 << 16) -#define POWER_VDDIOCTRL_LINREG_OFFSET_MASK (0x3 << 12) -#define POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET 12 -#define POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS (0x0 << 12) -#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12) -#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12) -#define POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12) -#define POWER_VDDIOCTRL_BO_OFFSET_MASK (0x7 << 8) -#define POWER_VDDIOCTRL_BO_OFFSET_OFFSET 8 -#define POWER_VDDIOCTRL_TRG_MASK 0x1f -#define POWER_VDDIOCTRL_TRG_OFFSET 0 - -#define POWER_VDDMEMCTRL_PULLDOWN_ACTIVE (1 << 10) -#define POWER_VDDMEMCTRL_ENABLE_ILIMIT (1 << 9) -#define POWER_VDDMEMCTRL_ENABLE_LINREG (1 << 8) -#define POWER_VDDMEMCTRL_TRG_MASK 0x1f -#define POWER_VDDMEMCTRL_TRG_OFFSET 0 - -#define POWER_DCDC4P2_DROPOUT_CTRL_MASK (0xf << 28) -#define POWER_DCDC4P2_DROPOUT_CTRL_OFFSET 28 -#define POWER_DCDC4P2_DROPOUT_CTRL_200MV (0x3 << 30) -#define POWER_DCDC4P2_DROPOUT_CTRL_100MV (0x2 << 30) -#define POWER_DCDC4P2_DROPOUT_CTRL_50MV (0x1 << 30) -#define POWER_DCDC4P2_DROPOUT_CTRL_25MV (0x0 << 30) -#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 (0x0 << 28) -#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT (0x1 << 28) -#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL (0x2 << 28) -#define POWER_DCDC4P2_ISTEAL_THRESH_MASK (0x3 << 24) -#define POWER_DCDC4P2_ISTEAL_THRESH_OFFSET 24 -#define POWER_DCDC4P2_ENABLE_4P2 (1 << 23) -#define POWER_DCDC4P2_ENABLE_DCDC (1 << 22) -#define POWER_DCDC4P2_HYST_DIR (1 << 21) -#define POWER_DCDC4P2_HYST_THRESH (1 << 20) -#define POWER_DCDC4P2_TRG_MASK (0x7 << 16) -#define POWER_DCDC4P2_TRG_OFFSET 16 -#define POWER_DCDC4P2_TRG_4V2 (0x0 << 16) -#define POWER_DCDC4P2_TRG_4V1 (0x1 << 16) -#define POWER_DCDC4P2_TRG_4V0 (0x2 << 16) -#define POWER_DCDC4P2_TRG_3V9 (0x3 << 16) -#define POWER_DCDC4P2_TRG_BATT (0x4 << 16) -#define POWER_DCDC4P2_BO_MASK (0x1f << 8) -#define POWER_DCDC4P2_BO_OFFSET 8 -#define POWER_DCDC4P2_CMPTRIP_MASK 0x1f -#define POWER_DCDC4P2_CMPTRIP_OFFSET 0 - -#define POWER_MISC_FREQSEL_MASK (0x7 << 4) -#define POWER_MISC_FREQSEL_OFFSET 4 -#define POWER_MISC_FREQSEL_20MHZ (0x1 << 4) -#define POWER_MISC_FREQSEL_24MHZ (0x2 << 4) -#define POWER_MISC_FREQSEL_19MHZ (0x3 << 4) -#define POWER_MISC_FREQSEL_14MHZ (0x4 << 4) -#define POWER_MISC_FREQSEL_18MHZ (0x5 << 4) -#define POWER_MISC_FREQSEL_21MHZ (0x6 << 4) -#define POWER_MISC_FREQSEL_17MHZ (0x7 << 4) -#define POWER_MISC_DISABLE_FET_BO_LOGIC (1 << 3) -#define POWER_MISC_DELAY_TIMING (1 << 2) -#define POWER_MISC_TEST (1 << 1) -#define POWER_MISC_SEL_PLLCLK (1 << 0) - -#define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8) -#define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8 -#define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f -#define POWER_DCLIMITS_NEGLIMIT_OFFSET 0 - -#define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20) -#define POWER_LOOPCTRL_HYST_SIGN (1 << 19) -#define POWER_LOOPCTRL_EN_CM_HYST (1 << 18) -#define POWER_LOOPCTRL_EN_DF_HYST (1 << 17) -#define POWER_LOOPCTRL_CM_HYST_THRESH (1 << 16) -#define POWER_LOOPCTRL_DF_HYST_THRESH (1 << 15) -#define POWER_LOOPCTRL_RCSCALE_THRESH (1 << 14) -#define POWER_LOOPCTRL_EN_RCSCALE_MASK (0x3 << 12) -#define POWER_LOOPCTRL_EN_RCSCALE_OFFSET 12 -#define POWER_LOOPCTRL_EN_RCSCALE_DIS (0x0 << 12) -#define POWER_LOOPCTRL_EN_RCSCALE_2X (0x1 << 12) -#define POWER_LOOPCTRL_EN_RCSCALE_4X (0x2 << 12) -#define POWER_LOOPCTRL_EN_RCSCALE_8X (0x3 << 12) -#define POWER_LOOPCTRL_DC_FF_MASK (0x7 << 8) -#define POWER_LOOPCTRL_DC_FF_OFFSET 8 -#define POWER_LOOPCTRL_DC_R_MASK (0xf << 4) -#define POWER_LOOPCTRL_DC_R_OFFSET 4 -#define POWER_LOOPCTRL_DC_C_MASK 0x3 -#define POWER_LOOPCTRL_DC_C_OFFSET 0 -#define POWER_LOOPCTRL_DC_C_MAX 0x0 -#define POWER_LOOPCTRL_DC_C_2X 0x1 -#define POWER_LOOPCTRL_DC_C_4X 0x2 -#define POWER_LOOPCTRL_DC_C_MIN 0x3 - -#define POWER_STS_PWRUP_SOURCE_MASK (0x3f << 24) -#define POWER_STS_PWRUP_SOURCE_OFFSET 24 -#define POWER_STS_PWRUP_SOURCE_5V (0x20 << 24) -#define POWER_STS_PWRUP_SOURCE_RTC (0x10 << 24) -#define POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH (0x02 << 24) -#define POWER_STS_PWRUP_SOURCE_PSWITCH_MID (0x01 << 24) -#define POWER_STS_PSWITCH_MASK (0x3 << 20) -#define POWER_STS_PSWITCH_OFFSET 20 -#define POWER_STS_AVALID0_STATUS (1 << 17) -#define POWER_STS_BVALID0_STATUS (1 << 16) -#define POWER_STS_VBUSVALID0_STATUS (1 << 15) -#define POWER_STS_SESSEND0_STATUS (1 << 14) -#define POWER_STS_BATT_BO (1 << 13) -#define POWER_STS_VDD5V_FAULT (1 << 12) -#define POWER_STS_CHRGSTS (1 << 11) -#define POWER_STS_DCDC_4P2_BO (1 << 10) -#define POWER_STS_DC_OK (1 << 9) -#define POWER_STS_VDDIO_BO (1 << 8) -#define POWER_STS_VDDA_BO (1 << 7) -#define POWER_STS_VDDD_BO (1 << 6) -#define POWER_STS_VDD5V_GT_VDDIO (1 << 5) -#define POWER_STS_VDD5V_DROOP (1 << 4) -#define POWER_STS_AVALID0 (1 << 3) -#define POWER_STS_BVALID0 (1 << 2) -#define POWER_STS_VBUSVALID0 (1 << 1) -#define POWER_STS_SESSEND0 (1 << 0) - -#define POWER_SPEED_STATUS_MASK (0xff << 16) -#define POWER_SPEED_STATUS_OFFSET 16 -#define POWER_SPEED_CTRL_MASK 0x3 -#define POWER_SPEED_CTRL_OFFSET 0 -#define POWER_SPEED_CTRL_SS_OFF 0x0 -#define POWER_SPEED_CTRL_SS_ON 0x1 -#define POWER_SPEED_CTRL_SS_ENABLE 0x3 - -#define POWER_BATTMONITOR_BATT_VAL_MASK (0x3ff << 16) -#define POWER_BATTMONITOR_BATT_VAL_OFFSET 16 -#define POWER_BATTMONITOR_EN_BATADJ (1 << 10) -#define POWER_BATTMONITOR_PWDN_BATTBRNOUT (1 << 9) -#define POWER_BATTMONITOR_BRWNOUT_PWD (1 << 8) -#define POWER_BATTMONITOR_BRWNOUT_LVL_MASK 0x1f -#define POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET 0 - -#define POWER_RESET_UNLOCK_MASK (0xffff << 16) -#define POWER_RESET_UNLOCK_OFFSET 16 -#define POWER_RESET_UNLOCK_KEY (0x3e77 << 16) -#define POWER_RESET_PWD_OFF (1 << 1) -#define POWER_RESET_PWD (1 << 0) - -#define POWER_DEBUG_VBUSVALIDPIOLOCK (1 << 3) -#define POWER_DEBUG_AVALIDPIOLOCK (1 << 2) -#define POWER_DEBUG_BVALIDPIOLOCK (1 << 1) -#define POWER_DEBUG_SESSENDPIOLOCK (1 << 0) - -#define POWER_SPECIAL_TEST_MASK 0xffffffff -#define POWER_SPECIAL_TEST_OFFSET 0 - -#define POWER_VERSION_MAJOR_MASK (0xff << 24) -#define POWER_VERSION_MAJOR_OFFSET 24 -#define POWER_VERSION_MINOR_MASK (0xff << 16) -#define POWER_VERSION_MINOR_OFFSET 16 -#define POWER_VERSION_STEP_MASK 0xffff -#define POWER_VERSION_STEP_OFFSET 0 - -#endif /* __MX23_REGS_POWER_H__ */ diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h index eeb7e7f44c06..26e620f93802 100644 --- a/arch/arm/include/asm/arch-mxs/regs-ssp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h @@ -14,28 +14,7 @@ #include <asm/mach-imx/regs-common.h> #ifndef __ASSEMBLY__ -#if defined(CONFIG_MX23) -struct mxs_ssp_regs { - mxs_reg_32(hw_ssp_ctrl0) - mxs_reg_32(hw_ssp_cmd0) - mxs_reg_32(hw_ssp_cmd1) - mxs_reg_32(hw_ssp_compref) - mxs_reg_32(hw_ssp_compmask) - mxs_reg_32(hw_ssp_timing) - mxs_reg_32(hw_ssp_ctrl1) - mxs_reg_32(hw_ssp_data) - mxs_reg_32(hw_ssp_sdresp0) - mxs_reg_32(hw_ssp_sdresp1) - mxs_reg_32(hw_ssp_sdresp2) - mxs_reg_32(hw_ssp_sdresp3) - mxs_reg_32(hw_ssp_status) - - uint32_t reserved1[12]; - - mxs_reg_32(hw_ssp_debug) - mxs_reg_32(hw_ssp_version) -}; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) struct mxs_ssp_regs { mxs_reg_32(hw_ssp_ctrl0) mxs_reg_32(hw_ssp_cmd0) @@ -62,9 +41,7 @@ struct mxs_ssp_regs { static inline int mxs_ssp_bus_id_valid(int bus) { -#if defined(CONFIG_MX23) - const unsigned int mxs_ssp_chan_count = 2; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) const unsigned int mxs_ssp_chan_count = 4; #endif @@ -79,9 +56,7 @@ static inline int mxs_ssp_bus_id_valid(int bus) static inline int mxs_ssp_clock_by_bus(unsigned int clock) { -#if defined(CONFIG_MX23) - return 0; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) return clock; #endif } @@ -125,11 +100,6 @@ static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port) #define SSP_CTRL0_GET_RESP (1 << 17) #define SSP_CTRL0_ENABLE (1 << 16) -#ifdef CONFIG_MX23 -#define SSP_CTRL0_XFER_COUNT_OFFSET 0 -#define SSP_CTRL0_XFER_COUNT_MASK 0xffff -#endif - #define SSP_CMD0_SOFT_TERMINATE (1 << 26) #define SSP_CMD0_DBL_DATA_RATE_EN (1 << 25) #define SSP_CMD0_PRIM_BOOT_OP_EN (1 << 24) @@ -137,12 +107,6 @@ static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port) #define SSP_CMD0_SLOW_CLKING_EN (1 << 22) #define SSP_CMD0_CONT_CLKING_EN (1 << 21) #define SSP_CMD0_APPEND_8CYC (1 << 20) -#if defined(CONFIG_MX23) -#define SSP_CMD0_BLOCK_SIZE_MASK (0xf << 16) -#define SSP_CMD0_BLOCK_SIZE_OFFSET 16 -#define SSP_CMD0_BLOCK_COUNT_MASK (0xff << 8) -#define SSP_CMD0_BLOCK_COUNT_OFFSET 8 -#endif #define SSP_CMD0_CMD_MASK 0xff #define SSP_CMD0_CMD_OFFSET 0 #define SSP_CMD0_CMD_MMC_GO_IDLE_STATE 0x00 diff --git a/arch/arm/include/asm/arch-mxs/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h index 9e19aabf114a..83ac268f70c0 100644 --- a/arch/arm/include/asm/arch-mxs/regs-timrot.h +++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h @@ -17,16 +17,7 @@ struct mxs_timrot_regs { mxs_reg_32(hw_timrot_rotctrl) mxs_reg_32(hw_timrot_rotcount) -#if defined(CONFIG_MX23) - mxs_reg_32(hw_timrot_timctrl0) - mxs_reg_32(hw_timrot_timcount0) - mxs_reg_32(hw_timrot_timctrl1) - mxs_reg_32(hw_timrot_timcount1) - mxs_reg_32(hw_timrot_timctrl2) - mxs_reg_32(hw_timrot_timcount2) - mxs_reg_32(hw_timrot_timctrl3) - mxs_reg_32(hw_timrot_timcount3) -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) mxs_reg_32(hw_timrot_timctrl0) mxs_reg_32(hw_timrot_running_count0) mxs_reg_32(hw_timrot_fixed_count0) @@ -68,9 +59,7 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10) #define TIMROT_ROTCTRL_POLARITY_B (1 << 9) #define TIMROT_ROTCTRL_POLARITY_A (1 << 8) -#if defined(CONFIG_MX23) -#define TIMROT_ROTCTRL_SELECT_B_MASK (0x7 << 4) -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4) #endif #define TIMROT_ROTCTRL_SELECT_B_OFFSET 4 @@ -80,19 +69,14 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4) -#if defined(CONFIG_MX23) -#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x6 << 4) -#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0x7 << 4) -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4) #define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4) #define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4) #endif -#if defined(CONFIG_MX23) -#define TIMROT_ROTCTRL_SELECT_A_MASK 0x7 -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_A_MASK 0xf #endif #define TIMROT_ROTCTRL_SELECT_A_OFFSET 0 @@ -102,10 +86,7 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3 #define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4 #define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5 -#if defined(CONFIG_MX23) -#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x6 -#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0x7 -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6 #define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7 #define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8 @@ -138,15 +119,7 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRLn_SELECT_PWM2 0x3 #define TIMROT_TIMCTRLn_SELECT_PWM3 0x4 #define TIMROT_TIMCTRLn_SELECT_PWM4 0x5 -#if defined(CONFIG_MX23) -#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x6 -#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0x7 -#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0x8 -#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0x9 -#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xa -#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xb -#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xc -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMROT_TIMCTRLn_SELECT_PWM5 0x6 #define TIMROT_TIMCTRLn_SELECT_PWM6 0x7 #define TIMROT_TIMCTRLn_SELECT_PWM7 0x8 @@ -159,18 +132,12 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf #endif -#if defined(CONFIG_MX23) -#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK (0xffff << 16) -#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 16 -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff #define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0 #endif -#if defined(CONFIG_MX23) -#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffff -#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0 -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff #define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0 #endif @@ -188,15 +155,7 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16) -#if defined(CONFIG_MX23) -#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x6 << 16) -#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0x7 << 16) -#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0x8 << 16) -#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0x9 << 16) -#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xa << 16) -#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xb << 16) -#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xc << 16) -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16) @@ -208,45 +167,7 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16) #endif -#if defined(CONFIG_MX23) -#define TIMROT_TIMCTRL3_IRQ (1 << 15) -#define TIMROT_TIMCTRL3_IRQ_EN (1 << 14) -#define TIMROT_TIMCTRL3_DUTU_VALID (1 << 10) -#endif #define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9) -#if defined(CONFIG_MX23) -#define TIMROT_TIMCTRL3_POLARITY_MASK (0x1 << 8) -#define TIMROT_TIMCTRL3_POLARITY_OFFSET 8 -#define TIMROT_TIMCTRL3_POLARITY_POSITIVE (0x0 << 8) -#define TIMROT_TIMCTRL3_POLARITY_NEGATIVE (0x1 << 8) -#define TIMROT_TIMCTRL3_UPDATE (1 << 7) -#define TIMROT_TIMCTRL3_RELOAD (1 << 6) -#define TIMROT_TIMCTRL3_PRESCALE_MASK (0x3 << 4) -#define TIMROT_TIMCTRL3_PRESCALE_OFFSET 4 -#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_1 (0x0 << 4) -#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_2 (0x1 << 4) -#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_4 (0x2 << 4) -#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_8 (0x3 << 4) -#define TIMROT_TIMCTRL3_SELECT_MASK 0xf -#define TIMROT_TIMCTRL3_SELECT_OFFSET 0 -#define TIMROT_TIMCTRL3_SELECT_NEVER_TICK 0x0 -#define TIMROT_TIMCTRL3_SELECT_PWM0 0x1 -#define TIMROT_TIMCTRL3_SELECT_PWM1 0x2 -#define TIMROT_TIMCTRL3_SELECT_PWM2 0x3 -#define TIMROT_TIMCTRL3_SELECT_PWM3 0x4 -#define TIMROT_TIMCTRL3_SELECT_PWM4 0x5 -#define TIMROT_TIMCTRL3_SELECT_ROTARYA 0x6 -#define TIMROT_TIMCTRL3_SELECT_ROTARYB 0x7 -#define TIMROT_TIMCTRL3_SELECT_32KHZ_XTAL 0x8 -#define TIMROT_TIMCTRL3_SELECT_8KHZ_XTAL 0x9 -#define TIMROT_TIMCTRL3_SELECT_4KHZ_XTAL 0xa -#define TIMROT_TIMCTRL3_SELECT_1KHZ_XTAL 0xb -#define TIMROT_TIMCTRL3_SELECT_TICK_ALWAYS 0xc -#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_MASK (0xffff << 16) -#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_OFFSET 16 -#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_MASK 0xffff -#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_OFFSET 0 -#endif #define TIMROT_VERSION_MAJOR_MASK (0xff << 24) #define TIMROT_VERSION_MAJOR_OFFSET 24 diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index 20ee863ac7e7..5d86d6b28312 100644 --- a/arch/arm/include/asm/arch-mxs/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -16,9 +16,7 @@ int mxsmmc_initialize(struct bd_info *bis, int id, int (*wp)(int), #ifdef CONFIG_SPL_BUILD -#if defined(CONFIG_MX23) -#include <asm/arch/iomux-mx23.h> -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #include <asm/arch/iomux-mx28.h> #endif @@ -36,18 +34,7 @@ struct mxs_pair { }; static const struct mxs_pair mxs_boot_modes[] = { -#if defined(CONFIG_MX23) - { 0x00, 0x0f, "USB" }, - { 0x01, 0x1f, "I2C, master" }, - { 0x02, 0x1f, "SSP SPI #1, master, NOR" }, - { 0x03, 0x1f, "SSP SPI #2, master, NOR" }, - { 0x04, 0x1f, "NAND" }, - { 0x06, 0x1f, "JTAG" }, - { 0x08, 0x1f, "SSP SPI #3, master, EEPROM" }, - { 0x09, 0x1f, "SSP SD/MMC #0" }, - { 0x0a, 0x1f, "SSP SD/MMC #1" }, - { 0x00, 0x00, "Reserved/Unknown/Wrong" }, -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) { 0x00, 0x0f, "USB #0" }, { 0x01, 0x1f, "I2C #0, master, 3V3" }, { 0x11, 0x1f, "I2C #0, master, 1V8" }, diff --git a/arch/arm/include/asm/mach-imx/dma.h b/arch/arm/include/asm/mach-imx/dma.h index 55eb84cb8e7e..30a0fc057f2a 100644 --- a/arch/arm/include/asm/mach-imx/dma.h +++ b/arch/arm/include/asm/mach-imx/dma.h @@ -23,19 +23,7 @@ /* * MXS DMA channels */ -#if defined(CONFIG_MX23) -enum { - MXS_DMA_CHANNEL_AHB_APBH_LCDIF = 0, - MXS_DMA_CHANNEL_AHB_APBH_SSP0, - MXS_DMA_CHANNEL_AHB_APBH_SSP1, - MXS_DMA_CHANNEL_AHB_APBH_RESERVED0, - MXS_DMA_CHANNEL_AHB_APBH_GPMI0, - MXS_DMA_CHANNEL_AHB_APBH_GPMI1, - MXS_DMA_CHANNEL_AHB_APBH_GPMI2, - MXS_DMA_CHANNEL_AHB_APBH_GPMI3, - MXS_MAX_DMA_CHANNELS, -}; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) enum { MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0, MXS_DMA_CHANNEL_AHB_APBH_SSP1, diff --git a/arch/arm/include/asm/mach-imx/regs-apbh.h b/arch/arm/include/asm/mach-imx/regs-apbh.h index 94c330c7f928..c751eab99164 100644 --- a/arch/arm/include/asm/mach-imx/regs-apbh.h +++ b/arch/arm/include/asm/mach-imx/regs-apbh.h @@ -17,86 +17,6 @@ #ifndef __ASSEMBLY__ -#if defined(CONFIG_MX23) -struct mxs_apbh_regs { - mxs_reg_32(hw_apbh_ctrl0) - mxs_reg_32(hw_apbh_ctrl1) - mxs_reg_32(hw_apbh_ctrl2) - mxs_reg_32(hw_apbh_channel_ctrl) - - union { - struct { - mxs_reg_32(hw_apbh_ch_curcmdar) - mxs_reg_32(hw_apbh_ch_nxtcmdar) - mxs_reg_32(hw_apbh_ch_cmd) - mxs_reg_32(hw_apbh_ch_bar) - mxs_reg_32(hw_apbh_ch_sema) - mxs_reg_32(hw_apbh_ch_debug1) - mxs_reg_32(hw_apbh_ch_debug2) - } ch[8]; - struct { - mxs_reg_32(hw_apbh_ch0_curcmdar) - mxs_reg_32(hw_apbh_ch0_nxtcmdar) - mxs_reg_32(hw_apbh_ch0_cmd) - mxs_reg_32(hw_apbh_ch0_bar) - mxs_reg_32(hw_apbh_ch0_sema) - mxs_reg_32(hw_apbh_ch0_debug1) - mxs_reg_32(hw_apbh_ch0_debug2) - mxs_reg_32(hw_apbh_ch1_curcmdar) - mxs_reg_32(hw_apbh_ch1_nxtcmdar) - mxs_reg_32(hw_apbh_ch1_cmd) - mxs_reg_32(hw_apbh_ch1_bar) - mxs_reg_32(hw_apbh_ch1_sema) - mxs_reg_32(hw_apbh_ch1_debug1) - mxs_reg_32(hw_apbh_ch1_debug2) - mxs_reg_32(hw_apbh_ch2_curcmdar) - mxs_reg_32(hw_apbh_ch2_nxtcmdar) - mxs_reg_32(hw_apbh_ch2_cmd) - mxs_reg_32(hw_apbh_ch2_bar) - mxs_reg_32(hw_apbh_ch2_sema) - mxs_reg_32(hw_apbh_ch2_debug1) - mxs_reg_32(hw_apbh_ch2_debug2) - mxs_reg_32(hw_apbh_ch3_curcmdar) - mxs_reg_32(hw_apbh_ch3_nxtcmdar) - mxs_reg_32(hw_apbh_ch3_cmd) - mxs_reg_32(hw_apbh_ch3_bar) - mxs_reg_32(hw_apbh_ch3_sema) - mxs_reg_32(hw_apbh_ch3_debug1) - mxs_reg_32(hw_apbh_ch3_debug2) - mxs_reg_32(hw_apbh_ch4_curcmdar) - mxs_reg_32(hw_apbh_ch4_nxtcmdar) - mxs_reg_32(hw_apbh_ch4_cmd) - mxs_reg_32(hw_apbh_ch4_bar) - mxs_reg_32(hw_apbh_ch4_sema) - mxs_reg_32(hw_apbh_ch4_debug1) - mxs_reg_32(hw_apbh_ch4_debug2) - mxs_reg_32(hw_apbh_ch5_curcmdar) - mxs_reg_32(hw_apbh_ch5_nxtcmdar) - mxs_reg_32(hw_apbh_ch5_cmd) - mxs_reg_32(hw_apbh_ch5_bar) - mxs_reg_32(hw_apbh_ch5_sema) - mxs_reg_32(hw_apbh_ch5_debug1) - mxs_reg_32(hw_apbh_ch5_debug2) - mxs_reg_32(hw_apbh_ch6_curcmdar) - mxs_reg_32(hw_apbh_ch6_nxtcmdar) - mxs_reg_32(hw_apbh_ch6_cmd) - mxs_reg_32(hw_apbh_ch6_bar) - mxs_reg_32(hw_apbh_ch6_sema) - mxs_reg_32(hw_apbh_ch6_debug1) - mxs_reg_32(hw_apbh_ch6_debug2) - mxs_reg_32(hw_apbh_ch7_curcmdar) - mxs_reg_32(hw_apbh_ch7_nxtcmdar) - mxs_reg_32(hw_apbh_ch7_cmd) - mxs_reg_32(hw_apbh_ch7_bar) - mxs_reg_32(hw_apbh_ch7_sema) - mxs_reg_32(hw_apbh_ch7_debug1) - mxs_reg_32(hw_apbh_ch7_debug2) - }; - }; - mxs_reg_32(hw_apbh_version) -}; - -#else struct mxs_apbh_regs { mxs_reg_32(hw_apbh_ctrl0) mxs_reg_32(hw_apbh_ctrl1) @@ -235,7 +155,6 @@ struct mxs_apbh_regs { }; mxs_reg_32(hw_apbh_version) }; -#endif #endif @@ -243,20 +162,7 @@ struct mxs_apbh_regs { #define APBH_CTRL0_CLKGATE (1 << 30) #define APBH_CTRL0_AHB_BURST8_EN (1 << 29) #define APBH_CTRL0_APB_BURST_EN (1 << 28) -#if defined(CONFIG_MX23) -#define APBH_CTRL0_RSVD0_MASK (0xf << 24) -#define APBH_CTRL0_RSVD0_OFFSET 24 -#define APBH_CTRL0_RESET_CHANNEL_MASK (0xff << 16) -#define APBH_CTRL0_RESET_CHANNEL_OFFSET 16 -#define APBH_CTRL0_CLKGATE_CHANNEL_MASK (0xff << 8) -#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 8 -#define APBH_CTRL0_CLKGATE_CHANNEL_SSP0 0x02 -#define APBH_CTRL0_CLKGATE_CHANNEL_SSP1 0x04 -#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x10 -#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x20 -#define APBH_CTRL0_CLKGATE_CHANNEL_NAND2 0x40 -#define APBH_CTRL0_CLKGATE_CHANNEL_NAND3 0x80 -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define APBH_CTRL0_RSVD0_MASK (0xfff << 16) #define APBH_CTRL0_RSVD0_OFFSET 16 #define APBH_CTRL0_CLKGATE_CHANNEL_MASK 0xffff @@ -393,24 +299,7 @@ struct mxs_apbh_regs { /* Not on i.MX23 */ #define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16 -#if defined(CONFIG_MX23) -#define APBH_DEVSEL_CH7_MASK (0xf << 28) -#define APBH_DEVSEL_CH7_OFFSET 28 -#define APBH_DEVSEL_CH6_MASK (0xf << 24) -#define APBH_DEVSEL_CH6_OFFSET 24 -#define APBH_DEVSEL_CH5_MASK (0xf << 20) -#define APBH_DEVSEL_CH5_OFFSET 20 -#define APBH_DEVSEL_CH4_MASK (0xf << 16) -#define APBH_DEVSEL_CH4_OFFSET 16 -#define APBH_DEVSEL_CH3_MASK (0xf << 12) -#define APBH_DEVSEL_CH3_OFFSET 12 -#define APBH_DEVSEL_CH2_MASK (0xf << 8) -#define APBH_DEVSEL_CH2_OFFSET 8 -#define APBH_DEVSEL_CH1_MASK (0xf << 4) -#define APBH_DEVSEL_CH1_OFFSET 4 -#define APBH_DEVSEL_CH0_MASK (0xf << 0) -#define APBH_DEVSEL_CH0_OFFSET 0 -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define APBH_DEVSEL_CH15_MASK (0x3 << 30) #define APBH_DEVSEL_CH15_OFFSET 30 #define APBH_DEVSEL_CH14_MASK (0x3 << 28) diff --git a/arch/arm/include/asm/mach-imx/regs-lcdif.h b/arch/arm/include/asm/mach-imx/regs-lcdif.h index 587463879661..12e0faad91d6 100644 --- a/arch/arm/include/asm/mach-imx/regs-lcdif.h +++ b/arch/arm/include/asm/mach-imx/regs-lcdif.h @@ -29,10 +29,6 @@ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_cur_buf) /* 0x30/0x40 */ mxs_reg_32(hw_lcdif_next_buf) /* 0x40/0x50 */ -#if defined(CONFIG_MX23) - uint32_t reserved1[4]; -#endif - mxs_reg_32(hw_lcdif_timing) /* 0x60 */ mxs_reg_32(hw_lcdif_vdctrl0) /* 0x70 */ mxs_reg_32(hw_lcdif_vdctrl1) /* 0x80 */ @@ -52,9 +48,6 @@ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_csc_offset) /* 0x160 */ mxs_reg_32(hw_lcdif_csc_limit) /* 0x170 */ -#if defined(CONFIG_MX23) - uint32_t reserved2[12]; -#endif mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */ mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */ #if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \ @@ -214,13 +207,8 @@ struct mxs_lcdif_regs { #define LCDIF_VDCTRL1_VSYNC_PERIOD_MASK 0xffffffff #define LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET 0 -#if defined(CONFIG_MX23) -#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0xff << 24) -#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 24 -#else #define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0x3fff << 18) #define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 18 -#endif #define LCDIF_VDCTRL2_HSYNC_PERIOD_MASK 0x3ffff #define LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET 0 diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index bd075de2b826..e04b0dc10f6c 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -1,24 +1,3 @@ -if ARCH_MX23 - -config MX23 - bool - default y - -choice - prompt "MX23 board select" - optional - -config TARGET_SANSA_FUZE_PLUS - bool "Support sansa_fuze_plus" - -endchoice - -config SYS_SOC - default "mxs" - - -endif - if ARCH_MX28 config MX28 diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index da988f6bb667..e05415d2d502 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -215,10 +215,7 @@ static int mxs_dma_reset(int channel) struct mxs_apbh_regs *apbh_regs = (struct mxs_apbh_regs *)MXS_APBH_BASE; int ret; -#if defined(CONFIG_MX23) - uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set); - uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET; -#elif defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || \ +#if defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || \ defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) u32 setreg = (uintptr_t)(&apbh_regs->hw_apbh_channel_ctrl_set); u32 offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET; diff --git a/drivers/gpio/mxs_gpio.c b/drivers/gpio/mxs_gpio.c index 4b2b18fdb538..22e50dd21ca9 100644 --- a/drivers/gpio/mxs_gpio.c +++ b/drivers/gpio/mxs_gpio.c @@ -15,15 +15,7 @@ #include <asm/arch/iomux.h> #include <asm/arch/imx-regs.h> -#if defined(CONFIG_MX23) -#define PINCTRL_BANKS 3 -#define PINCTRL_DOUT(n) (0x0500 + ((n) * 0x10)) -#define PINCTRL_DIN(n) (0x0600 + ((n) * 0x10)) -#define PINCTRL_DOE(n) (0x0700 + ((n) * 0x10)) -#define PINCTRL_PIN2IRQ(n) (0x0800 + ((n) * 0x10)) -#define PINCTRL_IRQEN(n) (0x0900 + ((n) * 0x10)) -#define PINCTRL_IRQSTAT(n) (0x0c00 + ((n) * 0x10)) -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define PINCTRL_BANKS 5 #define PINCTRL_DOUT(n) (0x0700 + ((n) * 0x10)) #define PINCTRL_DIN(n) (0x0900 + ((n) * 0x10)) @@ -32,7 +24,7 @@ #define PINCTRL_IRQEN(n) (0x1100 + ((n) * 0x10)) #define PINCTRL_IRQSTAT(n) (0x1400 + ((n) * 0x10)) #else -#error "Please select CONFIG_MX23 or CONFIG_MX28" +#error "Please select CONFIG_MX28" #endif #define GPIO_INT_FALL_EDGE 0x0 diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index 8fd41764152f..863e67f10c52 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -391,15 +391,7 @@ mxsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, struct mmc_data *data) ctrl0 |= SSP_CTRL0_DATA_XFER; reg = data->blocksize * data->blocks; -#if defined(CONFIG_MX23) - ctrl0 |= reg & SSP_CTRL0_XFER_COUNT_MASK; - - clrsetbits_le32(&ssp_regs->hw_ssp_cmd0, - SSP_CMD0_BLOCK_SIZE_MASK | SSP_CMD0_BLOCK_COUNT_MASK, - ((data->blocks - 1) << SSP_CMD0_BLOCK_COUNT_OFFSET) | - ((ffs(data->blocksize) - 1) << - SSP_CMD0_BLOCK_SIZE_OFFSET)); -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) writel(reg, &ssp_regs->hw_ssp_xfer_size); reg = ((data->blocks - 1) << @@ -595,8 +587,6 @@ static int mxsmmc_probe(struct udevice *dev) #ifdef CONFIG_MX28 priv->clkid = clkid - MXS_SSP_IMX28_CLKID_SSP0; -#else /* CONFIG_MX23 */ - priv->clkid = clkid - MXS_SSP_IMX23_CLKID_SSP0; #endif mmc = &plat->mmc; mmc->cfg = &plat->cfg; diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index d41352a0bb8c..45b541fe1668 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -83,10 +83,7 @@ static int mxs_spi_xfer_pio(struct mxs_spi_priv *priv, while (length--) { /* We transfer 1 byte */ -#if defined(CONFIG_MX23) - writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr); - writel(1, &ssp_regs->hw_ssp_ctrl0_set); -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) writel(1, &ssp_regs->hw_ssp_xfer_size); #endif @@ -146,9 +143,7 @@ static int mxs_spi_xfer_dma(struct mxs_spi_priv *priv, int tl; int ret = 0; -#if defined(CONFIG_MX23) - const int mxs_spi_pio_words = 1; -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) const int mxs_spi_pio_words = 4; #endif diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 325c3ee00ce3..3db3e18066e7 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -23,17 +23,9 @@ * Includes */ -#if defined(CONFIG_MX23) && defined(CONFIG_MX28) -#error Select either CONFIG_MX23 or CONFIG_MX28 , never both! -#elif !defined(CONFIG_MX23) && !defined(CONFIG_MX28) -#error Select one of CONFIG_MX23 or CONFIG_MX28 ! -#endif - #include <asm/arch/regs-base.h> -#if defined(CONFIG_MX23) -#include <asm/arch/iomux-mx23.h> -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #include <asm/arch/iomux-mx28.h> #endif @@ -54,9 +46,7 @@ /* OCRAM at 0x0 ; 32kB on MX23 ; 128kB on MX28 */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 -#if defined(CONFIG_MX23) -#define CONFIG_SYS_INIT_RAM_SIZE (32 * 1024) -#elif defined(CONFIG_MX28) +#if defined(CONFIG_MX28) #define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) #endif diff --git a/tools/Makefile b/tools/Makefile index 2d550432ba5a..ce8faeb85249 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -127,7 +127,7 @@ fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o file2include-objs := file2include.o -ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_FIT_SIGNATURE),) +ifneq ($(CONFIG_MX28)$(CONFIG_FIT_SIGNATURE),) # Add CONFIG_MXS into host CFLAGS, so we can check whether or not register # the mxsimage support within tools/mxsimage.c . HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS @@ -155,7 +155,7 @@ HOSTCFLAGS_kwbimage.o += -DCONFIG_KWB_SECURE endif # MXSImage needs LibSSL -ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),) +ifneq ($(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),) HOSTCFLAGS_kwbimage.o += \ $(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "") HOSTLDLIBS_mkimage += \ @@ -186,7 +186,6 @@ hostprogs-$(CONFIG_X86) += ifdtool ifwitool-objs := ifwitool.o hostprogs-$(CONFIG_X86)$(CONFIG_SANDBOX) += ifwitool -hostprogs-$(CONFIG_MX23) += mxsboot hostprogs-$(CONFIG_MX28) += mxsboot HOSTCFLAGS_mxsboot.o := -pedantic -- 2.17.1
