Board support for the Guntermann & Drunck CATCenter Io. Signed-off-by: Dirk Eibach <[email protected]> --- Changes since v1: - added MAINTAINERS entry - sort MAKEALL - whitespace/codestyle cleanup - use boards.cfg instead of Makefile - added some comments for clarification - use CONFIG_BITBANGMII_MULTI
MAINTAINERS | 1 + MAKEALL | 1 + board/gdsys/io/Makefile | 51 +++++++++ board/gdsys/io/config.mk | 24 ++++ board/gdsys/io/io.c | 249 ++++++++++++++++++++++++++++++++++++++++++ board/gdsys/io/io_miiphybb.c | 102 +++++++++++++++++ boards.cfg | 1 + include/configs/io.h | 241 ++++++++++++++++++++++++++++++++++++++++ 8 files changed, 670 insertions(+), 0 deletions(-) create mode 100644 board/gdsys/io/Makefile create mode 100644 board/gdsys/io/config.mk create mode 100644 board/gdsys/io/io.c create mode 100644 board/gdsys/io/io_miiphybb.c create mode 100644 include/configs/io.h diff --git a/MAINTAINERS b/MAINTAINERS index e003226..a321c7a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -145,6 +145,7 @@ Dirk Eibach <[email protected]> dlvision PPC405EP gdppc440etx PPC440EP/GR intip PPC460EX + io PPC405EP neo PPC405EP Dave Ellis <[email protected]> diff --git a/MAKEALL b/MAKEALL index 1b506d6..e7e1bd9 100755 --- a/MAKEALL +++ b/MAKEALL @@ -157,6 +157,7 @@ LIST_4xx="$(boards_by_cpu ppc4xx) hcu4 \ hcu5 \ intip \ + io \ kilauea \ kilauea_nand \ mcu25 \ diff --git a/board/gdsys/io/Makefile b/board/gdsys/io/Makefile new file mode 100644 index 0000000..2b8ca54 --- /dev/null +++ b/board/gdsys/io/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, [email protected]. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o io_miiphybb.o +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/gdsys/io/config.mk b/board/gdsys/io/config.mk new file mode 100644 index 0000000..1bdf5e4 --- /dev/null +++ b/board/gdsys/io/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, [email protected]. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000 diff --git a/board/gdsys/io/io.c b/board/gdsys/io/io.c new file mode 100644 index 0000000..8bb700e --- /dev/null +++ b/board/gdsys/io/io.c @@ -0,0 +1,249 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, [email protected] + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/ppc4xx-gpio.h> + +#include <miiphy.h> + +#define PHYREG_CONTROL 0 +#define PHYREG_PAGE_ADDRESS 22 +#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16 +#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26 + +#define REFLECTION_TESTPATTERN 0xdede +#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) + +enum { + REG_REFELECTION_LOW = 0x0000, + REG_VERSIONS = 0x0002, + REG_FPGA_FEATURES = 0x0004, + REG_FPGA_VERSION = 0x0006, + REG_QUAD_SERDES_RESET = 0x0012, + REG_REFELECTION_HIGH = 0x3ffe, +}; + +enum { + UNITTYPE_CCD_SWITCH = 1, +}; + +enum { + HWVER_100 = 0, + HWVER_110 = 1, + HWVER_121 = 2, + HWVER_122 = 3, +}; + +static u16 fpga_get_reg(unsigned reg) +{ + return in_le16((void *)(CONFIG_SYS_FPGA_BASE + reg)); +} + +static void fpga_set_reg(unsigned reg, u16 val) +{ + return out_le16((void *)(CONFIG_SYS_FPGA_BASE + reg), val); +} + +int configure_gbit_phy(unsigned char addr) +{ + unsigned short value; + + /* select page 2 */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PAGE_ADDRESS, 0x0002)) + goto err_out; + /* disable SGMII autonegotiation */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2, 0x800a)) + goto err_out; + /* select page 0 */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PAGE_ADDRESS, 0x0000)) + goto err_out; + /* switch from powerdown to normal operation */ + if (miiphy_read(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, &value)) + goto err_out; + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, value & ~0x0004)) + goto err_out; + /* reset phy so settings take effect */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_CONTROL, 0x9140)) + goto err_out; + + return 0; + +err_out: + printf("Error writing to the PHY addr=%02x\n", addr); + return -1; +} + +int board_early_init_f(void) +{ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + + /* + * EBC Configuration Register: set ready timeout to 512 ebc-clks + * -> ca. 15 us + */ + mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ + + /* + * setup io-latches + */ + out_le16((void *)CONFIG_SYS_LATCH_BASE, 0xffff); + out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x100), 0xffbf); + + /* + * set "startup-finished"-gpios + */ + gpio_write_bit(21, 0); + gpio_write_bit(22, 1); + + /* + * wait for fpga-done + * fail ungraceful if fpga is not configuring properly + */ + while (!(in_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x200)) & 0x0010)) + ; + + /* + * stop reset peripherals + */ + udelay(10); + out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x100), 0xffff); + + /* + * wait for fpga out of reset + * fail ungraceful if fpga is not working properly + */ + while (1) { + fpga_set_reg(REG_REFELECTION_LOW, REFLECTION_TESTPATTERN); + if (fpga_get_reg(REG_REFELECTION_HIGH) == + REFLECTION_TESTPATTERN_INV) + break; + } + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + u16 versions = fpga_get_reg(REG_VERSIONS); + u16 fpga_version = fpga_get_reg(REG_FPGA_VERSION); + u16 fpga_features = fpga_get_reg(REG_FPGA_FEATURES); + unsigned unit_type; + unsigned hardware_version; + unsigned feature_channels; + unsigned feature_expansion; + + unit_type = (versions & 0xf000) >> 12; + hardware_version = versions & 0x000f; + feature_channels = fpga_features & 0x007f; + feature_expansion = fpga_features & (1<<15); + + printf("Board: "); + + printf("CATCenter Io"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + puts("\n "); + + switch (unit_type) { + case UNITTYPE_CCD_SWITCH: + printf("CCD-Switch"); + break; + + default: + printf("UnitType %d(not supported)", unit_type); + break; + } + + switch (hardware_version) { + case HWVER_100: + printf(" HW-Ver 1.00\n"); + break; + + case HWVER_110: + printf(" HW-Ver 1.10\n"); + break; + + case HWVER_121: + printf(" HW-Ver 1.21\n"); + break; + + case HWVER_122: + printf(" HW-Ver 1.22\n"); + break; + + default: + printf(" HW-Ver %d(not supported)\n", + hardware_version); + break; + } + + printf(" FPGA V %d.%02d, features:", + fpga_version / 100, fpga_version % 100); + + printf(" %d channel(s)", feature_channels); + + printf(", expansion %ssupported\n", feature_expansion ? "" : "un"); + + return 0; +} + +/* + * setup Gbit PHYs + */ +int last_stage_init(void) +{ + unsigned int k; + + miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME, + bb_miiphy_read, bb_miiphy_write); + + for (k = 0; k < 32; ++k) + configure_gbit_phy(k); + + /* take fpga serdes blocks out of reset */ + fpga_set_reg(REG_QUAD_SERDES_RESET, 0); + + return 0; +} diff --git a/board/gdsys/io/io_miiphybb.c b/board/gdsys/io/io_miiphybb.c new file mode 100644 index 0000000..e56e966 --- /dev/null +++ b/board/gdsys/io/io_miiphybb.c @@ -0,0 +1,102 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, [email protected] + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <miiphy.h> + +#include <asm/io.h> + +static int io_bb_mii_init(struct bb_miiphy_bus *bus) +{ + return 0; +} + +static int io_bb_mdio_active(struct bb_miiphy_bus *bus) +{ + out_be32((void *)GPIO0_TCR, + in_be32((void *)GPIO0_TCR) | CONFIG_SYS_MDIO_PIN); + + return 0; +} + +static int io_bb_mdio_tristate(struct bb_miiphy_bus *bus) +{ + out_be32((void *)GPIO0_TCR, + in_be32((void *)GPIO0_TCR) & ~CONFIG_SYS_MDIO_PIN); + + return 0; +} + +static int io_bb_set_mdio(struct bb_miiphy_bus *bus, int v) +{ + if (v) + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | CONFIG_SYS_MDIO_PIN); + else + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_MDIO_PIN); + + return 0; +} + +static int io_bb_get_mdio(struct bb_miiphy_bus *bus, int *v) +{ + *v = ((in_be32((void *)GPIO0_IR) & CONFIG_SYS_MDIO_PIN) != 0); + + return 0; +} + +static int io_bb_set_mdc(struct bb_miiphy_bus *bus, int v) +{ + if (v) + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | CONFIG_SYS_MDC_PIN); + else + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_MDC_PIN); + + return 0; +} + +static int io_bb_delay(struct bb_miiphy_bus *bus) +{ + udelay(1); + + return 0; +} + +struct bb_miiphy_bus bb_miiphy_buses[] = { + { + .name = CONFIG_SYS_GBIT_MII_BUSNAME, + .init = io_bb_mii_init, + .mdio_active = io_bb_mdio_active, + .mdio_tristate = io_bb_mdio_tristate, + .set_mdio = io_bb_set_mdio, + .get_mdio = io_bb_get_mdio, + .set_mdc = io_bb_set_mdc, + .delay = io_bb_delay, + } +}; + +int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / + sizeof(bb_miiphy_buses[0]); diff --git a/boards.cfg b/boards.cfg index 202de1a..903e378 100644 --- a/boards.cfg +++ b/boards.cfg @@ -357,6 +357,7 @@ pcs440ep powerpc ppc4xx quad100hd powerpc ppc4xx dlvision powerpc ppc4xx - gdsys gdppc440etx powerpc ppc4xx - gdsys +io powerpc ppc4xx - gdsys CPCIISER4 powerpc ppc4xx cpciiser4 esd DASA_SIM powerpc ppc4xx dasa_sim esd PMC405DE powerpc ppc4xx pmc405de esd diff --git a/include/configs/io.h b/include/configs/io.h new file mode 100644 index 0000000..26e57af --- /dev/null +++ b/include/configs/io.h @@ -0,0 +1,241 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, [email protected] + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_405EP 1 /* this is a PPC405 CPU */ +#define CONFIG_4xx 1 /* member of PPC4xx family */ +#define CONFIG_IO 1 /* on a Io board */ + +/* + * Include common defines/options for all AMCC eval boards + */ +#define CONFIG_HOSTNAME io +#define CONFIG_IDENT_STRING " io 0.04" +#include "amcc-common.h" + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ +#define CONFIG_LAST_STAGE_INIT /* call last_stage_init */ + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ + +/* + * Configure PLL + */ +#define PLLMR0_DEFAULT PLLMR0_266_133_66 +#define PLLMR1_DEFAULT PLLMR1_266_133_66 + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_AMCC_DEF_ENV \ + CONFIG_AMCC_DEF_ENV_POWERPC \ + CONFIG_AMCC_DEF_ENV_NOR_UPD \ + "kernel_addr=fc000000\0" \ + "fdt_addr=fc1e0000\0" \ + "ramdisk_addr=fc200000\0" \ + "" + +#define CONFIG_PHY_ADDR 4 /* PHY address */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 0xc /* EMAC1 PHY address */ +#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ + +/* + * Commands additional to the ones defined in amcc-common.h + */ +#define CONFIG_CMD_CACHE +#undef CONFIG_CMD_EEPROM + +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ + +/* SDRAM timings used in datasheet */ +#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */ +#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */ +#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CONFIG_SYS_BASE_BAUD 691200 + +/* + * I2C stuff + */ +#define CONFIG_SYS_I2C_SPEED 100000 + +/* Temp sensor/hwmon/dtt */ +#define CONFIG_DTT_LM63 1 /* National LM63 */ +#define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */ +#define CONFIG_DTT_PWM_LOOKUPTABLE \ + { { 40, 10 }, { 50, 20 }, { 60, 40 } } +#define CONFIG_DTT_TACH_LIMIT 0xa10 + +/* + * FLASH organization + */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CONFIG_SYS_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ + +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif + +/* Gbit PHYs */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII_MULTI + +#define CONFIG_SYS_MDIO_PIN (0x80000000 >> 13) /* our MDIO is GPIO0 */ +#define CONFIG_SYS_MDC_PIN (0x80000000 >> 7) /* our MDC is GPIO7 */ + +#define CONFIG_SYS_GBIT_MII_BUSNAME "io_miiphy" + +/* + * PPC405 GPIO Configuration + */ +#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \ +} \ +} + +/* + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 +#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size/bytes res'd for init data*/ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CONFIG_SYS_EBC_PB0AP 0xa382a880 +/* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000 + +/* Memory Bank 1 (NVRAM) initializatio */ +#define CONFIG_SYS_EBC_PB1AP 0x92015480 +/* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */ +#define CONFIG_SYS_EBC_PB1CR 0x7f318000 + +/* Memory Bank 2 (FPGA) initialization */ +#define CONFIG_SYS_FPGA_BASE 0x7f100000 +#define CONFIG_SYS_EBC_PB2AP 0x02025080 +/* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB2CR 0x7f11a000 + +/* Memory Bank 3 (Latches) initialization */ +#define CONFIG_SYS_LATCH_BASE 0x7f200000 +#define CONFIG_SYS_EBC_PB3AP 0xa2015480 +/* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB3CR 0x7f21a000 + +#endif /* __CONFIG_H */ -- 1.5.6.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
