> CONFIG_SPL_LEGACY_IMAGE_SUPPORT is necessary for mx6sabresd and > mx6sabreauto, because u-boot is packed as legacy image not FIT. > However, this config is not set when CONFIG_SPL_LOAD_FIT is enabled. > Must enable it explicitly, otherwise will fail to boot like below. > U-Boot SPL 2021.04-rc2 (Feb 20 2021 - 16:43:04 -0800) > Trying to boot from MMC1 > mmc_load_image_raw_sector: mmc block read error > SPL: failed to boot from all boot devices > Signed-off-by: Ye Li <[email protected]> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
