In message <[email protected]> you wrote: > The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864: > > Merge branch 'master' of git://git.denx.de/u-boot-x86 (2010-10-11 10:00:34 > +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-arm.git master > > Albert Aribaud (6): > arm: bugfix: replace ble with blo in start.S files > orion5x: fix relocation-incompatible code > mvsata_ide: adjust port init sequence > orion5x: optimize window size computation > mvsata_ide: adjust port init sequence > orion5x: optimize window size computation > > Alexander Stein (1): > at91: Add arch_preboot_os which disables PIT in a faster way > > Andreas Bießmann (6): > at91_emac.c: fix 'Warning: eth device name has a space!' > at91_emac.c: poll for IDLE when writing PHY > at91_emac.h: fix typo in register definition > atmel_usart: change register access to C structure > arch/arm/include/asm/sizes.h: cleanups > board/armltd/integrator/split_by_variant.sh: fix 'echo -n' > > Ben Gardiner (1): > ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC > > Heiko Schocher (1): > ARM: relocation: fix typo in comment > > Matt Waddel (2): > ARMV7: Versatile Express Coretile CortexA9x4 support > ARMV7: Fixed baudrate setting in pl01x driver > > Prafulla Wadaskar (8): > Kirkwood: print_cpuinfo fixed for valid devid revid > Kirkwood: dram_init is moved to dram.c > kirkwood: added common config file mv-common.h > Kirkwood: Changes specific to ARM relocation support > Kirkwood: print_cpuinfo fixed for valid devid revid > Kirkwood: dram_init is moved to dram.c > kirkwood: added common config file mv-common.h > Kirkwood: Changes specific to ARM relocation support > > Reinhard Meyer (1): > AT91: convert cpu.c to struct SoC access > > Stefano Babic (10): > Use common function to set GPIOs for MX3 and MX5 > ARM: Use syslib functions for all CORTEXA8 > MX51: Added pins definition to set up pads > MX51: add structure to access System Reset Controller > MXC: Add watchdog support to serial driver > MX51: Drop unused header file for mx51evk > MXC: Correct SPI_CPOL setting in SPI driver > MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51 > MX51: Register definitions cannot be included in board config file > MX51: Support for TTECH vision2 board > > Wolfgang Denk (3): > Merge branch 'master' of git://git.denx.de/u-boot-imx > Merge branch 'at91' of git://git.denx.de/u-boot-atmel > Merge branch 'master' of git://git.denx.de/u-boot-marvell > > MAINTAINERS | 5 + > MAKEALL | 1 + > arch/arm/cpu/arm1136/start.S | 8 +- > arch/arm/cpu/arm1176/start.S | 10 +- > arch/arm/cpu/arm720t/start.S | 10 +- > arch/arm/cpu/arm920t/start.S | 10 +- > arch/arm/cpu/arm925t/start.S | 10 +- > arch/arm/cpu/arm926ejs/at91/cpu.c | 48 +- > arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 34 +- > arch/arm/cpu/arm926ejs/kirkwood/dram.c | 38 + > arch/arm/cpu/arm926ejs/orion5x/cpu.c | 112 ++-- > arch/arm/cpu/arm926ejs/orion5x/timer.c | 6 +- > arch/arm/cpu/arm926ejs/start.S | 10 +- > arch/arm/cpu/arm946es/start.S | 8 +- > arch/arm/cpu/arm_intcm/start.S | 10 +- > arch/arm/cpu/armv7/Makefile | 3 +- > arch/arm/cpu/armv7/omap-common/Makefile | 1 - > arch/arm/cpu/armv7/start.S | 8 +- > arch/arm/cpu/armv7/{omap-common => }/syslib.c | 0 > arch/arm/cpu/ixp/start.S | 10 +- > arch/arm/cpu/lh7a40x/start.S | 11 +- > arch/arm/cpu/pxa/start.S | 8 +- > arch/arm/cpu/s3c44b0/start.S | 12 +- > arch/arm/cpu/sa1100/start.S | 10 +- > arch/arm/include/asm/arch-arm925t/sizes.h | 50 -- > arch/arm/include/asm/arch-arm926ejs/sizes.h | 51 -- > arch/arm/include/asm/arch-armv7/sysctrl.h | 70 ++ > .../arm/include/asm/arch-armv7/systimer.h | 54 +- > .../arm/include/asm/arch-armv7/wdt.h | 57 +- > arch/arm/include/asm/arch-at91/at91_emac.h | 2 +- > arch/arm/include/asm/arch-kirkwood/cpu.h | 2 + > arch/arm/include/asm/arch-mx31/mx31-regs.h | 14 +- > arch/arm/include/asm/arch-mx31/mx31.h | 25 - > arch/arm/include/asm/arch-mx51/imx-regs.h | 26 +- > arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++ > arch/arm/include/asm/arch-mx51/sys_proto.h | 1 + > arch/arm/include/asm/arch-omap/sizes.h | 52 -- > arch/arm/include/asm/arch-omap24xx/omap2420.h | 2 +- > arch/arm/include/asm/arch-omap24xx/sizes.h | 49 -- > arch/arm/include/asm/arch-orion5x/cpu.h | 1 + > arch/arm/include/asm/sizes.h | 5 +- > board/Marvell/guruplug/guruplug.c | 11 - > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 11 - > board/Marvell/openrd_base/openrd_base.c | 11 - > board/Marvell/rd6281a/rd6281a.c | 11 - > board/Marvell/sheevaplug/sheevaplug.c | 11 - > board/armltd/integrator/split_by_variant.sh | 129 ++-- > board/armltd/vexpress/Makefile | 49 ++ > board/armltd/vexpress/ca9x4_ct_vxp.c | 220 ++++++ > board/armltd/vexpress/config.mk | 23 + > board/armltd/vexpress/u-boot.lds | 65 ++ > board/davedenx/qong/qong.c | 29 +- > board/freescale/mx51evk/mx51evk.c | 2 - > board/ttcontrol/vision2/Makefile | 48 ++ > board/ttcontrol/vision2/config.mk | 25 + > board/ttcontrol/vision2/imximage_hynix.cfg | 209 ++++++ > board/ttcontrol/vision2/vision2.c | 711 ++++++++++++++++> > ++++ > boards.cfg | 2 + > drivers/block/mvsata_ide.c | 42 +- > drivers/gpio/Makefile | 2 +- > drivers/gpio/{mx31_gpio.c => mxc_gpio.c} | 47 +- > drivers/misc/fsl_pmic.c | 10 +- > drivers/net/at91_emac.c | 22 +- > drivers/serial/atmel_usart.c | 36 +- > drivers/serial/atmel_usart.h | 56 +- > drivers/serial/serial_mxc.c | 7 +- > drivers/serial/serial_pl01x.c | 93 +-- > drivers/spi/mxc_spi.c | 168 ++++-- > include/configs/ca9x4_ct_vxp.h | 196 ++++++ > include/configs/da850evm.h | 1 - > include/configs/guruplug.h | 103 +--- > include/configs/h2_p2_dbg_board.h | 2 +- > include/configs/imx27lite-common.h | 3 +- > include/configs/imx31_litekit.h | 4 +- > include/configs/imx31_phycore.h | 2 +- > include/configs/keymile-common.h | 1 + > include/configs/km_arm.h | 2 +- > include/configs/mv-common.h | 230 +++++++ > include/configs/mv88f6281gtw_ge.h | 120 +--- > include/configs/mx31ads.h | 4 +- > include/configs/mx31pdk.h | 4 +- > include/configs/mx51evk.h | 2 +- > include/configs/omap1510.h | 2 +- > include/configs/omap3_beagle.h | 3 +- > include/configs/omap730.h | 2 +- > include/configs/openrd_base.h | 146 +---- > include/configs/qong.h | 9 +- > include/configs/rd6281a.h | 101 +--- > include/configs/sheevaplug.h | 104 +--- > include/configs/tx25.h | 3 +- > include/configs/vision2.h | 214 ++++++ > include/mc13892.h | 3 + > .../mx51evk/mx51evk.h => include/mxc_gpio.h | 50 +- > 93 files changed, 2904 insertions(+), 1345 deletions(-) > rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%) > delete mode 100644 arch/arm/include/asm/arch-arm925t/sizes.h > delete mode 100644 arch/arm/include/asm/arch-arm926ejs/sizes.h > create mode 100644 arch/arm/include/asm/arch-armv7/sysctrl.h > copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> > 7/systimer.h (55%) > copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> > 7/wdt.h (55%) > delete mode 100644 arch/arm/include/asm/arch-omap/sizes.h > delete mode 100644 arch/arm/include/asm/arch-omap24xx/sizes.h > create mode 100644 board/armltd/vexpress/Makefile > create mode 100644 board/armltd/vexpress/ca9x4_ct_vxp.c > create mode 100644 board/armltd/vexpress/config.mk > create mode 100644 board/armltd/vexpress/u-boot.lds > create mode 100644 board/ttcontrol/vision2/Makefile > create mode 100644 board/ttcontrol/vision2/config.mk > create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg > create mode 100644 board/ttcontrol/vision2/vision2.c > rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%) > create mode 100644 include/configs/ca9x4_ct_vxp.h > create mode 100644 include/configs/mv-common.h > create mode 100644 include/configs/vision2.h > rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)
Applied. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Stupidity, like virtue, is its own reward. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
