[PATCH] dts: mt7629: enable JTAG pins by default

[Weijie Gao]

The EPHY LEDs belongs to the built-in FE switch of MT7629, which is barely
used. These LED pins on reference boards are used as JTAG socket. So it's
a good idea to change the default state to JTAG, and this will make it
convenience for debugging.

Signed-off-by: Weijie Gao <weijie....@mediatek.com>
---
 arch/arm/dts/mt7629-rfb.dts | 10 ++++++++++
 arch/arm/dts/mt7629.dtsi    |  6 ++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm/dts/mt7629-rfb.dts b/arch/arm/dts/mt7629-rfb.dts
index df43cc49c5..f2e4e9548b 100644
--- a/arch/arm/dts/mt7629-rfb.dts
+++ b/arch/arm/dts/mt7629-rfb.dts
@@ -36,6 +36,16 @@
 };
 
 &pinctrl {
+       state_default: pinmux_conf {
+               u-boot,dm-pre-reloc;
+
+               mux {
+                       function = "jtag";
+                       groups = "ephy_leds_jtag";
+                       u-boot,dm-pre-reloc;
+               };
+       };
+
        snfi_pins: snfi-pins {
                mux {
                        function = "flash";
diff --git a/arch/arm/dts/mt7629.dtsi b/arch/arm/dts/mt7629.dtsi
index 05394266e0..7dea7809c7 100644
--- a/arch/arm/dts/mt7629.dtsi
+++ b/arch/arm/dts/mt7629.dtsi
@@ -152,6 +152,12 @@
                compatible = "mediatek,mt7629-pinctrl";
                reg = <0x10217000 0x8000>;
 
+               pinctrl-names = "default";
+               pinctrl-0 = <&state_default>;
+
+               state_default: pinmux_conf {
+               };
+
                gpio: gpio-controller {
                        gpio-controller;
                        #gpio-cells = <2>;
-- 
2.17.1