Dear Damien Dusha, In message <[email protected]> you wrote: > Add support for the USB Host controller of the MPC5121e, based on the > original patch by Francesco Rendine [1]. > > The patch configures the USB Host controller and the on-board UTMI phy, > including the Freescale-specific registers as per the Linux kernel driver. > > Tested on the MPC5121ADS platform with various USB mass storage devices. > > [1] http://lists.denx.de/pipermail/u-boot/2009-June/055022.html > > Signed-off-by: Damien Dusha <[email protected]> > --- > arch/powerpc/include/asm/immap_512x.h | 4 + > board/freescale/mpc5121ads/mpc5121ads.c | 4 +- > drivers/usb/host/ehci-fsl.c | 137 ++++++++++++++++++++++++++++- > drivers/usb/host/ehci.h | 5 + > include/configs/mpc5121ads.h | 22 +++++- > include/usb/ehci-fsl.h | 149 > +++++++++++++++++++++++++------ > 6 files changed, 292 insertions(+), 29 deletions(-)
Sorry for the late response. I have to admit that I really dislike the big "#ifndef CONFIG_MPC512X" in drivers/usb/host/ehci-fsl.c - it covers basicly all of the existing code, and adds an alternative implementation for MPC512x. I think this should better be handled in a separate driver. Patch following. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] The ultimate barrier is one's viewpoint. - Terry Pratchett, _The Dark Side of the Sun_ _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
