Hi On 1/27/21 4:15 PM, Patrick DELAUNAY wrote: > Hi Patrice > > On 1/20/21 2:42 PM, Patrice Chotard wrote: >> In case of reading large area and memory-map mode is misconfigured >> (memory-map size declared lower than the real size of the memory chip) >> watchdog can be triggered. >> >> Add WATCHDOG_RESET() in _stm32_qspi_read_fifo to fix it. >> >> Issue reproduced with stm32mp157c-ev1 board and memory map size set to >> 1, with following command: >> sf read 0xC0000000 0 0x4000000 >> >> Signed-off-by: Patrice Chotard <[email protected]> >> --- >> >> drivers/spi/stm32_qspi.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/drivers/spi/stm32_qspi.c b/drivers/spi/stm32_qspi.c >> index 958c394a1a..c3da17f991 100644 >> --- a/drivers/spi/stm32_qspi.c >> +++ b/drivers/spi/stm32_qspi.c >> @@ -11,6 +11,7 @@ >> #include <clk.h> >> #include <reset.h> >> #include <spi-mem.h> >> +#include <watchdog.h> >> #include <linux/iopoll.h> >> #include <linux/ioport.h> >> #include <linux/sizes.h> >> @@ -163,6 +164,7 @@ static int _stm32_qspi_wait_cmd(struct stm32_qspi_priv >> *priv, >> static void _stm32_qspi_read_fifo(u8 *val, void __iomem *addr) >> { >> *val = readb(addr); >> + WATCHDOG_RESET(); >> } >> static void _stm32_qspi_write_fifo(u8 *val, void __iomem *addr) > > > Reviewed-by: Patrick Delaunay <[email protected]> > > Thanks > > Patrick > Applied to u-boot-stm/next
Thanks Patrice
