Hi On 3/4/21 4:00 PM, yannick Fertre wrote: > Acked-by: Yannick Fertre <[email protected]> > > > On 3/4/21 1:14 PM, Patrick Delaunay wrote: >> From: Yannick Fertre <[email protected]> >> >> The DSI phy can be turned on from the DSI digital interface in >> the dphy_enable() function or from a dedicated DSI phy "wrapper" >> in phy_ops->init() function. If the STM32MP1 case, the wrapper >> is used then the dphy_enable() "warning" traces are not relevant. >> >> This patch moves these "warning" traces to "debug" traces so >> they are still available for DSI phy based on the digital >> interface in debug logging mode, but not there in normal mode >> for both cases. >> Note: The related Linux kernel driver uses a "debug" >> message too. >> >> Signed-off-by: Yannick Fertre <[email protected]> >> Signed-off-by: Patrick Delaunay <[email protected]> >> --- >> >> drivers/video/dw_mipi_dsi.c | 8 ++++---- >> 1 file changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/video/dw_mipi_dsi.c b/drivers/video/dw_mipi_dsi.c >> index a5beed3514..9ae09eec12 100644 >> --- a/drivers/video/dw_mipi_dsi.c >> +++ b/drivers/video/dw_mipi_dsi.c >> @@ -721,15 +721,15 @@ static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi >> *dsi) >> ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, val, >> val & PHY_LOCK, PHY_STATUS_TIMEOUT_US); >> if (ret) >> - dev_warn(dsi->dsi_host.dev, >> - "failed to wait phy lock state\n"); >> + dev_dbg(dsi->dsi_host.dev, >> + "failed to wait phy lock state\n"); >> ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, >> val, val & PHY_STOP_STATE_CLK_LANE, >> PHY_STATUS_TIMEOUT_US); >> if (ret) >> - dev_warn(dsi->dsi_host.dev, >> - "failed to wait phy clk lane stop state\n"); >> + dev_dbg(dsi->dsi_host.dev, >> + "failed to wait phy clk lane stop state\n"); >> } >> static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi) >> Applied to u-boot-stm/next
Thanks Patrice
