On 3/15/21 6:32 PM, Jagan Teki wrote:
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
Linux dts commit details:
commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")
Add support for it.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v2:
- collect Patrice r-b
- add linux dts commit
- drop CONFIG_BOARD_EARLY_INIT_F
arch/arm/dts/Makefile | 1 +
...mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi | 51 ++++++
.../stm32mp157a-icore-stm32mp1-edimm2.2.dts | 47 ++++++
.../stm32mp157a-icore-stm32mp1-u-boot.dtsi | 146 ++++++++++++++++++
arch/arm/mach-stm32mp/Kconfig | 20 +++
board/engicam/stm32mp1/Kconfig | 12 ++
board/engicam/stm32mp1/MAINTAINERS | 6 +
board/engicam/stm32mp1/Makefile | 10 ++
board/engicam/stm32mp1/spl.c | 48 ++++++
board/engicam/stm32mp1/stm32mp1.c | 125 +++++++++++++++
...tm32mp15-icore-stm32mp1-edimm2.2_defconfig | 79 ++++++++++
11 files changed, 545 insertions(+)
create mode 100644
arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
create mode 100644 arch/arm/dts/stm32mp157a-icore-stm32mp1-u-boot.dtsi
create mode 100644 board/engicam/stm32mp1/Kconfig
create mode 100644 board/engicam/stm32mp1/MAINTAINERS
create mode 100644 board/engicam/stm32mp1/Makefile
create mode 100644 board/engicam/stm32mp1/spl.c
create mode 100644 board/engicam/stm32mp1/stm32mp1.c
create mode 100644 configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
Reviewed-by: Patrick Delaunay <[email protected]>
Thanks
Patrick
