Hi everyone, hope is the right place to ask but we are running out of ideas hehe, we need some help with a problem we have for a rockchip rk1808 based pcb we designed related with our DDR memory:
So the problem is that we are not able to go further from the execution of the ddr init code from psram, and we need to figure out a way to see if there is a problem with the ddr (we are using LPDDR3 2G). There seems to be possible to run some tests, from firefly chinese forum we found `Rockchip Platform DDR Test Tool` https://dev.t-firefly.com/thread-13005-1-1.html the tool provides cfg files to run a solder test ie: 1GB LPDDR3(128Mbx32bit x 2CS)soldering Test.cfg they published the tool recently for rk3399 too, but it doesn't work for rk1808, do you know of any way to run this kind of test from u-boot? or by chance do you know how to modify or generate a DDR init binary to run a DDR memory test too? So far we have been able to change the frequencies and test all of them for our DDR with ` ddrbin_tool` from rockchip rkbin repository, but we always get only this output on UART, ``` DDR Version V1.04 20191121 LPDDR3 333MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=32 Size=1024MB out ``` Any help deeply appreciated, also if there is another place i should ask, please let me know, we also tried to reach out rockchip team without luck. I also send the question to linux-rockchip mail list.
