> Subject: [PATCH v2] mmc: mtk-sd: increase the minimum bus frequency Could you please rebase? I am not able to apply this patch.
Thanks, Peng. > > With a 48MHz input clock, the lowest bus frequency can be as low as > 48000000 / (4 * 4095) = 2930Hz. Such an extremely low frequency will cause > the mmc framework take seconds to finish the initialization. > > Limiting the minimum bus frequency to a slightly higher value can solve the > issue without any side effects. > > Signed-off-by: Weijie Gao <[email protected]> > --- > drivers/mmc/mtk-sd.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c index > 3b9c122..626a4d3 100644 > --- a/drivers/mmc/mtk-sd.c > +++ b/drivers/mmc/mtk-sd.c > @@ -232,6 +232,8 @@ > > #define SCLK_CYCLES_SHIFT 20 > > +#define MIN_BUS_CLK 200000 > + > #define CMD_INTS_MASK \ > (MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | > MSDC_INT_CMDTMO) > > @@ -1639,6 +1641,9 @@ static int msdc_drv_probe(struct udevice *dev) > else > cfg->f_min = host->src_clk_freq / (4 * 4095); > > + if (cfg->f_min < MIN_BUS_CLK) > + cfg->f_min = MIN_BUS_CLK; > + > cfg->f_max = host->src_clk_freq; > > cfg->b_max = 1024; > -- > 1.9.1
