[ Adding Matthias for the SMBIOS part ]

On Fri, 2021-04-09 at 00:00 -0700, Roman Shaposhnik wrote:
> On Thu, Apr 8, 2021 at 8:59 PM Sean Anderson <sean...@gmail.com> wrote:
> > On 4/8/21 8:18 PM, Roman Shaposhnik wrote:
> > > Hi!
> > > 
> > > first time poster, long time lurker here. Over at Project EVE
> > > https://github.com/lf-edge/eve I've been trying to migrate
> > > from our current u-boot v2020.07 + patches:
> > > 
> > > https://github.com/lf-edge/eve/tree/master/pkg/u-boot/patches/patches-v2020.07
> > > to the latest u-boot 2021.04.
> > > 
> > > Great news is that most of the patches we dependent
> > > on seem to have been pulled upstream. However, this
> > > single *chunk* of one patchset wasn't:
> > > 
> > > https://github.com/lf-edge/eve/blob/master/pkg/u-boot/patches/patches-v2020.07/0001-usb-xhci-Load-Raspberry-Pi-4-VL805-s-firmware.patch#L293
> > > 
> > > I'm wondering what was the reason for leaving it behind,
> > 
> > +CC Nicolas
> > 
> > >   - Get rid of PCI core patch as not needed with correct DT PCI topology 
> > 
> > also from the cover letter
> > 
> > > This also depends on a DT/bindings patch available on the linux-mailing 
> > > lists:
> > > https://www.mail-archive.com/linux-kernel@.../msg2205783.html
> > 
> > The merged version of this series is
> > 
> > https://patchwork.kernel.org/project/linux-usb/list/?series=310015&state=%2A&archive=both
> > 
> > > Here is the relevant bit for reference/discussion:
> > > 
> > >          &pcie0 {
> > >                 pci@1,0 {
> > >                         #address-cells = <3>;
> > >                         #size-cells = <2>;
> > >                         ranges;
> > > 
> > >                         reg = <0 0 0 0 0>;
> > > 
> > >                         usb@1,0 {
> > >                                 reg = <0x10000 0 0 0 0>;
> > >                                 resets = <&reset 
> > > RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
> > >                         };
> > >                 };
> > >          };
> > 

Yes, instead of using a PCI quirk we settled on a reset controller. All in all
it is less hacky. But needs changes in DT.

> Aha! Thank you so much -- this is super helpful!
>  
> > > since without it I don't seem to have functioning USB
> > > devices on my  Raspberry Pi 4. In fact, adding it back:
> > > 
> > > https://github.com/rvs/eve/tree/u-boot/pkg/u-boot/patches/patches-v2021.04
> > > (just that one chunk -- 'cuz the reset got upstreamed)
> > > seems to solve the issue for me.
> > > 
> > > Another question I have is that the new u-boot seems to have
> > > some kind of a regression that I can't quite debug. The SMBIOS
> > > tables that it constructs during EFI boot sequence seem to be
> > > broken (see the dmidecode output below). Again, this seems
> > > to be a regression compared to  v2020.07. Any ideas on what
> > > could be wrong or how can I start debugging it would be
> > 
> > You can always bisect it ;)
> > 
> 
> 
> LOL -- true! I was just hoping someone would recognize the issue perhaps.
> 
> Thanks,
> Roman. 


Attachment: signature.asc
Description: This is a digitally signed message part

Reply via email to